Mission 2 follow me jeep?

[SGT Coyle]

Mission 2 follow me jeep?

2 out of 5 times failed to lead. Had to go around.

[ron533]

2nd mission issues : KA-50 Crash and Jeep not moving

 

Mission 2 follow me jeep?

2 out of 5 times failed to lead. Had to go around.

 

 

+1

Same for me. Jeep did not move 1 out of 4 times.

 

 

Also - both KA-50 helicopters crash on the hill next to AO after flying for a short time there.every mission.

 

probably usual AI stupidity, so maybe a height increase will solve it?....

 

 

Smoke is not visible from C-130 coming to land (as described in radio comms).

 

Tested with latest Stable DCS 2.5.4.26825

 

Thank you Ranger79!

[Ranger79]

+1

Same for me. Jeep did not move 1 out of 4 times.

 

 

Also - both KA-50 helicopters crash on the hill next to AO after flying for a short time there.every mission.

 

probably usual AI stupidity, so maybe a height increase will solve it?....

 

 

Smoke is not visible from C-130 coming to land (as described in radio comms).

 

Tested with latest Stable DCS 2.5.4.26825

 

Thank you Ranger79!

 

Thanks for the feedback Ron, had to remove smoke which was simulated by the C130 taking damage due to the C130 sometimes crashing early. Regarding the Jeep, not sure why it has an issue moving, need to check the mission out and see if there is an issue with stop conditions/commands. For the KA50's that is just wonky AI unfortunately.

[tees]

For me jeep just blocking entrance for runway i can go around him but wingman and second element just stay there

[rajdary]

Same here, even if i go around Jeep, wingmen dont follow. i Still take off avoiding all the other fire brigade vehicles etc... I take off but then nothing happens, no trigers no helicopter no SF team. Im stuck in mission 2

[rajdary]

I think the problem is with the C130, which instead of crashing or landing in Kutaisi, lands on Senaki-Kohlki.

[lurch0080]

ya i have the same issue

[Tigerwulf]

I am having the same issue with the follow me jeep. It isn't moving at all.

[Ramsay]

I am having the same issue with the follow me jeep. It isn't moving at all.

It's a known issue with 2.5.6 (the approaching C-130 recognises the runway as being blocked, so diverts to Senaki).

 

Ranger79 has said he'll try to update the mission(s) but if your're impatient, the unprotected campaign files are available for editing.

 

Penido, 08/02/2020 04:04:20

Hi guys, in mission 2 i had the same trouble, so i gone in mission editor e move the waypoint (2) of two vehicles that was near of the runway, to a little far of the runway and it works!!! It's not the best way, but until that fixes...

 

AirAssault237, 08/09/2020 21:47:15

Whelp, mission 2 is broken with the new .52437 update - the C-130 goes and lands at Senaki Kohlki instead of Kutaisi. Ive tried disabling the RTB on bingo fuel and moving the units around, but no success. Shame too - even with just a simple fam flight, mission 1 was a blast!

 

EDIT: Got it! Turns out a HEMTT truck coming in from the north was blocking the runway slightly because it was overshooting its waypoint - I didn't find it because it was hidden from my F10 map for whatever reason when I turned all labels on for some debugging - Its a cheesy solution, but I just ended up deleting them all and the C-130... behaved properly (Rip Herc Honcho).

 

https://www.digitalcombatsimulator.com/en/files/3311218/

 

Moving waypoint 1 of the HEMTT TFFT, so it'll hold further back from the runway (~250 ft, Taxiway B), allows the C-130 to attempt it's landing.

 

 

* The "follow me" jeep not moving - seems to be an intermittent issue, in my first test - it failed to move and I and the wingmen had to drive around him, however for my second test (after I'd move WP1 of the "follow me" jeep a little bit) the "follow me" vehicle triggered as normal.

 

I'm not sure if there's a problem with the trigger, my startup or the ai's pathing (I never had an issue in 2.5.5 but perhaps I was just lucky).

 

Tested 2.5.6.52347

本帖最后于2020年8月14日，由Ramsay编辑
Add picture from Mission Editor

[Zero091]

 

 

I removed ALL  from Kutaisi, but the C-130 still does not want to land

[Taz1004]

On 4/21/2021 at 6:34 AM, Zero091 said:

 

 

I removed ALL  from Kutaisi, but the C-130 still does not want to land

 

I fixed it by changing WP1 of C130 from "Landing" to "Fly over point".  With altitude set to lowest.  It wont divert since it's not landing and it's set to crash as soon as it enters the zone short of runway.

 

By the way, for your sanity, eliminate the extra points for wingmen landing in the mission goals.

本帖最后于2021年5月7日，由Taz1004编辑

[Zero091]

9 часов назад, Taz1004 сказал:

I fixed it by changing WP1 of C130 from "Landing" to "Fly over point".  With altitude set to lowest

Thank you so much, it works !!!