Jump to content

Community A-4E-C


Recommended Posts

Installed the latest version of the skyhawk and I seem to have some graphic issues with the HUD and the kneeboard.  See the picture.  Also, my kneeboard does not seem to include the 6 pages that are listed in the update.  Where are they located?graphics issues.png

Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .

Link to comment
Share on other sites

43 minutes ago, sobe said:

Installed the latest version of the skyhawk and I seem to have some graphic issues with the HUD and the kneeboard.  See the picture.  Also, my kneeboard does not seem to include the 6 pages that are listed in the update.  Where are they located?graphics issues.png

You have most likely installed it incorrectly, given that you seem to have a mix match between old and new assets. You need to completely delete the A-4E-C folder in Saved Games/DCS.openbeta/Mods/Aircraft. Then place the new A-4E-C folder in that location.


Edited by JNelson
Link to comment
Share on other sites

JNelson

When I do that, the little skyhawk icon on the start page of DCS is not colored (only grey) and the game crashes when i try to load a mission.  If I copy beta 5 over beta 4, the icon is colored, but I then get the graphics issues.  Nothing is every easy.

 

I have attached my log file.

dcs.log-20210529-143629.zip


Edited by sobe
log file attached

Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .

Link to comment
Share on other sites

Can you post a picture of your Aircraft folder? I think it is most likely installed incorrectly.

27 minutes ago, sobe said:

JNelson

When I do that, the little skyhawk icon on the start page of DCS is not colored (only grey) and the game crashes when i try to load a mission.  If I copy beta 5 over beta 4, the icon is colored, but I then get the graphics issues.  Nothing is every easy.

 

I have attached my log file.

dcs.log-20210529-143629.zip 199.81 kB · 0 downloads

 

 

Link to comment
Share on other sites

Here is the folder setup

location.png

Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .

Link to comment
Share on other sites

See attached.  Weird that sometimes my user folder has my name spelled out and sometimes it uses "13057" but I never had any issues with it.  Both my name user folder and 13057 seem to go to the same place. location.png

Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .

Link to comment
Share on other sites

17 minutes ago, sobe said:

See attached.  Weird that sometimes my user folder has my name spelled out and sometimes it uses "13057" but I never had any issues with it.  Both my name user folder and 13057 seem to go to the same place. location.png

Your problem is likely due to old versions of the same module, just renaming the folder is not enough and will try use both of your A-4s

Link to comment
Share on other sites

I just put the same beta 5 in both places and the icon is still grayed out even though it says beta 5.  I have never had this happen to me before.

Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .

Link to comment
Share on other sites

what channel do you want me to go to?  I am on your general channel

Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .

Link to comment
Share on other sites

Hey I just thought I would say thanks! very very much! 

 

I have been holding off on really thoroughly learning this aircraft as it has been in development but I think now I am ready to dive in head first and really learn it.

 

Such a great piece of work. I hope those involved will be or are going to commit to future full fidelity, pay-ware module development cos you got the skills dudes 🍻

  • Like 1
Link to comment
Share on other sites

Hello Everyone, we discovered that there is a conflict with our mod that causes the sounds of the A-4 to be used with official aircraft. If you run into this issue it has been fixed in a hotfix we released just now so please re-install the hotfixed version.

 

https://github.com/heclak/community-a4e-c/releases/tag/v2.0.0-beta-5.1

  • Like 5
Link to comment
Share on other sites

I want to thank JNelson for spending a significant amount of time with me last night in order to solve an issue with the Sky Hawk that was my own doing. 

  • Like 1

Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .

Link to comment
Share on other sites

I want to thank JNelson for spending a significant amount of time with me last night in order to solve an issue with the Sky Hawk that was my own doing. 
What did you do Sobe?

Cheers!


Sent from my SM-G950F using Tapatalk

W10 Home 64Bit, Intel Skylake I5 6600K 3.50GHz, ASUS ROG Stryx Z270F MoBo, 32GB G.Skill RipJaws V DDR4 3200 RAM, Samsung 960 Pro 512GB M.2 SSD (OS), Samsung 850 Pro 512GB SSD, 2TB Seagate SDHD, 2TB WD Green HDD, GALAX GTX GeForce 1070 EXOC Sniper White 8GB VRAM

Link to comment
Share on other sites

50 minutes ago, sobe said:

I want to thank JNelson for spending a significant amount of time with me last night in order to solve an issue with the Sky Hawk that was my own doing. 

It was plusnine who got you up and running in the end, I'm glad we got it working for you. Enjoy!

  • Like 1
Link to comment
Share on other sites

I find the gunsight is dimmer than pre-beta-4. It is quite hard to see in daylight. Keep up the great work. 

VR Flight Guy in PJ Pants -- this is how I fly. We do not fly at treetop height, we fly between trees(TM)

YouTube: https://www.youtube.com/channel/UCc9BDi-STaqgWsjNiHbW0fA

My simple missions: https://forum.dcs.world/topic/284071-vr-flight-guy-in-pj-pants-simple-missions/

NSRI - National Strategy Research Institution, a fictional organisation based on wordplay of Strategic Naval Research Institution (SNRI), a fictional institution appears in Mobile Suit Gundam UC timeline.

Link to comment
Share on other sites

5 hours ago, Razor5-1 said:

Anyone else missing the skins? I get the usual green missing texture on most of the liveries in beta 5 and 5.1   

There were some textures renamed this update to prevent conflicts with other modules/mods you will probably have to wait for their authors to update them. All the official skins should still work though.

  • Like 2
Link to comment
Share on other sites

Two questions:

After watching the training lesson on starting the jet, I had trouble (even using 2 hands) in turning the lat/long for D1 and D2.  I finally figured out that you can press the button and then simply adjust the lat/long by holding the mouse cursor on the outside dial.  Is this a change and am I correct?

 

On the Nav computer, if you are going over land you use the land dial and if by sea, you use the sea dial.  What happens if your trip takes you over both? Do you change the dial when that happens?

 

By the way, my old VAC voice program works fine with this jet (except for some reason it will not recognize F 1).  I use VAC for this jet so I don't have to mess with VA and Viacom as Viacom does not recognize this jet.

 


Edited by sobe

Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .

Link to comment
Share on other sites

Is the compass on top of the HUD backwards or am I just looking at it wrong?

Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...