manashttu Posted August 9, 2021 Share Posted August 9, 2021 Just installed and did some testing with this mod on my triple screen 2d setup. Must say it works beautifully in 2d. Have only tweaked on the haze setting (which alone is worth using this mod)---but I'm amazed how your FXAA and sharpening implementation comes so close to the more demanding MSAA in removing jaggies and shimmer. Also appreciate that it still works with MSAA enabled, as MSAA with this mod operating looks better than it does in stock. The lighting and reflections add so much. For other 2d users who, like me, may have passed over this "VR mod"---it is worth a try. Thank you, lefuneste01, for sharing this. 1 Intel 8700K, delidded at 5.1 ghz, Asrock z370 Extreme4, 32gb DDR4 3200, MSI Ventus RTX 3080, triple 1440p Dell s2716dg screens, VKB Gunfighter Mk.I, Virpil M50-CM2 throttle, MFG Crosswind pedals. Link to comment Share on other sites More sharing options...
FupDuck Posted August 12, 2021 Share Posted August 12, 2021 Hi there again! I've been using the mod with the latest 2.7.5 version, and I've noticed that the "very coarse" adjustment setting now moves the second decimal place, where it used to change the first decimal place the last time I had to set it up. Is there a way to put it back to the way it was? I'm finding it takes a really long time to make coarse adjustments now, especially since you can't just hold down the keys to adjust, you have to press them repeatedly, once for each step. (This is another request too maybe: can you make it so the adjustment key can be held down and the parameter will just keep going up or down till you release the key?). Thanks again for the great mod! "...I just wanna fly; put your arms around me baby, put your arms around me baby" - Sugar Ray RTX 3090, Ryzen 7 5800X3D, MSI MPG B550 Gaming mobo, 64 GB DDR4 RAM, 970 EVO Plus NVMe M.2 SSD 2TB game install drive, Oculus Quest Pro via link cable, Standalone DCS beta. Link to comment Share on other sites More sharing options...
lefuneste01 Posted August 12, 2021 Author Share Posted August 12, 2021 (edited) Hello, as it looks like the last OB did not break anything in the mod, I published in first post the 11.2 : New MFD and HUD sharpen setting page Fix issue when using Kegetys shader Mod and water=high Edited August 12, 2021 by lefuneste01 P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
peachmonkey Posted August 21, 2021 Share Posted August 21, 2021 (edited) hi there. Tried to use your mod but no matter how many times i've "installed" it the LShift+F7 combination never worked in-game. what am I missing? edit: I opened the archive and simply pasted the /bin folder over the game, verified the files are all there. Edited August 21, 2021 by peachmonkey Link to comment Share on other sites More sharing options...
lefuneste01 Posted August 22, 2021 Author Share Posted August 22, 2021 8 hours ago, peachmonkey said: hi there. Tried to use your mod but no matter how many times i've "installed" it the LShift+F7 combination never worked in-game. what am I missing? edit: I opened the archive and simply pasted the /bin folder over the game, verified the files are all there. Hello. did your check your graphics options (see limitation in first post )? Are you using other mods ? P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
peachmonkey Posted August 23, 2021 Share Posted August 23, 2021 On 8/22/2021 at 3:16 AM, lefuneste01 said: Hello. did your check your graphics options (see limitation in first post )? Are you using other mods ? hi, lefuneste01, "cockpit illumination", "lens effect" and SSA = these are all OFF in my settings And as far as the other mods... well, I've installed the "fw190a8 VR prop" mod (https://www.digitalcombatsimulator.com/en/files/3310681/), but it was 5 or 6 months ago, and I don't know even know if it's actually being used since the game was updated so many times since then. I do run the Beta 2.7 release though. Is Beta supported? Link to comment Share on other sites More sharing options...
lefuneste01 Posted August 23, 2021 Author Share Posted August 23, 2021 2 hours ago, peachmonkey said: hi, lefuneste01, "cockpit illumination", "lens effect" and SSA = these are all OFF in my settings And as far as the other mods... well, I've installed the "fw190a8 VR prop" mod (https://www.digitalcombatsimulator.com/en/files/3310681/), but it was 5 or 6 months ago, and I don't know even know if it's actually being used since the game was updated so many times since then. I do run the Beta 2.7 release though. Is Beta supported? Hello, both versions are supported. Can you check if a d3d11_log.txt us existing in dame directory than dcs.exe ? You should also have there d3d11.dll, shaderfixes directory,... P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
FupDuck Posted September 4, 2021 Share Posted September 4, 2021 On 8/21/2021 at 6:47 PM, peachmonkey said: hi there. Tried to use your mod but no matter how many times i've "installed" it the LShift+F7 combination never worked in-game. what am I missing? edit: I opened the archive and simply pasted the /bin folder over the game, verified the files are all there. This is happening to me too now. I have the mod installed as before, and its "effects" are still there (ie haze and reflections are turned right down, NVG are slightly bigger than default), but when I hit LShift F7, nothing happens. I uninstalled the mod, and the effects went back to default (haze and reflections came back, NVG to default), then I reinstalled the mod, and all my 3dmigoto settings came back, but I still can't access the menu through LShift F7. I checked the bin directory, the d3d11_log.txt file is there: Thanks! "...I just wanna fly; put your arms around me baby, put your arms around me baby" - Sugar Ray RTX 3090, Ryzen 7 5800X3D, MSI MPG B550 Gaming mobo, 64 GB DDR4 RAM, 970 EVO Plus NVMe M.2 SSD 2TB game install drive, Oculus Quest Pro via link cable, Standalone DCS beta. Link to comment Share on other sites More sharing options...
lefuneste01 Posted September 7, 2021 Author Share Posted September 7, 2021 (edited) Hello. I'll have a look. Edited September 7, 2021 by lefuneste01 P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
lefuneste01 Posted September 8, 2021 Author Share Posted September 8, 2021 I did some testing with last besta with and without Kegetys mod : it is still working on my config. Can you do a full repair and check again ? P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
lefuneste01 Posted September 9, 2021 Author Share Posted September 9, 2021 Just to check : You tried to display the menu in cockpit and not in hangar screen ? P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
FupDuck Posted September 11, 2021 Share Posted September 11, 2021 Hi @lefuneste01, Thanks for taking a look. For me, I have been always doing it with the kegetys mod installed as well. Maybe I'll try again without doing that first, but I'm pretty sure the last time I had the menu working, kegetys was there as well since you have to put that on before your mod. Again, its weird because the "effects" of your mod are there, I just can't bring up the menu. And yes, I am doing it in the cockpit. I will try again without kegetys and see how it goes. Just curious though, are your "previous versions" available online somewhere? Thanks again! "...I just wanna fly; put your arms around me baby, put your arms around me baby" - Sugar Ray RTX 3090, Ryzen 7 5800X3D, MSI MPG B550 Gaming mobo, 64 GB DDR4 RAM, 970 EVO Plus NVMe M.2 SSD 2TB game install drive, Oculus Quest Pro via link cable, Standalone DCS beta. Link to comment Share on other sites More sharing options...
lefuneste01 Posted September 12, 2021 Author Share Posted September 12, 2021 Hello, previous version are only on my PC, but they won't change your issue, same shaders are used. Can you try to do a full repair of DCS install kegetys mod install my 3dmigoto mod for kegetys mod install my mod again And ses if it is working again. Otherwise, you can try to rename d3dx_user.ini, which contain settings for the mod. P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
FupDuck Posted September 13, 2021 Share Posted September 13, 2021 A clean up is something I've needed to do for a while. I've been avoiding it because (a) It's a pain in the butt to rebuild all the shaders (b) I keep thinking "there will be a game update tomorrow" but it's been like a month now! Anyways, surely there will be a game update tomorrow, so I will do it then! "...I just wanna fly; put your arms around me baby, put your arms around me baby" - Sugar Ray RTX 3090, Ryzen 7 5800X3D, MSI MPG B550 Gaming mobo, 64 GB DDR4 RAM, 970 EVO Plus NVMe M.2 SSD 2TB game install drive, Oculus Quest Pro via link cable, Standalone DCS beta. Link to comment Share on other sites More sharing options...
rafalg78 Posted September 15, 2021 Share Posted September 15, 2021 The same issue with menu, LShift+F7 is not working. I am using together with VR shaders mod. 1 Link to comment Share on other sites More sharing options...
lefuneste01 Posted September 16, 2021 Author Share Posted September 16, 2021 18 hours ago, rafalg78 said: The same issue with menu, LShift+F7 is not working. I am using together with VR shaders mod. It is likelly that VR shader mod would break the mod. Try to apply the mod for VR shader mod (provided with 3dmigoto) on top of the VR shader mod... P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
lefuneste01 Posted September 17, 2021 Author Share Posted September 17, 2021 Hello, Mod tested with last Beta 2.7.6.12852, all seems working with or without kegetys mod, in VR and in 2D. P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
kelmcguir Posted September 30, 2021 Share Posted September 30, 2021 I installed this mod and Kegetys and it works in single player. I couldn't get into a server with it though. Does it not pass the integrity checks? Link to comment Share on other sites More sharing options...
lefuneste01 Posted September 30, 2021 Author Share Posted September 30, 2021 (edited) 9 hours ago, kelmcguir said: I installed this mod and Kegetys and it works in single player. I couldn't get into a server with it though. Does it not pass the integrity checks? The mod itself should, but not the kegetys. So either remove the kegetys mod, or have a look here for version that should be IC compatible: https://forums.eagle.ru/topic/257795-vr-shaders-for-ic-pass-clear-water-and-texture-fixes/page/11/?tab=comments#comment-4777686 The best way to unsinstall the kegetys mod is to do a full repair if you did not backup the shader folder. You can keep the 3dmigoto mod without issue because it doesnt change any game file. The mod for shadermod should be installed on the IC mod, but I did not check if all modified files are in the IC version. Maybe there are more in the mod for shader mod than in IC mod, so they make brake IC. There are too many version of shader mod, I will not provide compatibility patch for all of them...You should have a look on files in mod for shader mod and check if they are in IC mod. If not, remove them. But I can not guarantee that all features will work in thé 3dmigoto. Try and report... Edited September 30, 2021 by lefuneste01 P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
derfritz Posted October 1, 2021 Share Posted October 1, 2021 Also doesn't work for me even after a full repair sadly. No 2D nor VR. No mods installed at all. Link to comment Share on other sites More sharing options...
lefuneste01 Posted October 2, 2021 Author Share Posted October 2, 2021 On 10/1/2021 at 6:00 PM, derfritz said: Also doesn't work for me even after a full repair sadly. No 2D nor VR. No mods installed at all. Hello, I did the troubleshooting guide joined here. Can you try it and give feedback ? DCS 3dmigoto troubleshooting guide.pdf 1 P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
derfritz Posted October 11, 2021 Share Posted October 11, 2021 Thanks nice guide! Hunting=1 showed me the mod is working, and alt-f7 did open the menu. Link to comment Share on other sites More sharing options...
lefuneste01 Posted October 14, 2021 Author Share Posted October 14, 2021 On 10/11/2021 at 7:07 PM, derfritz said: Thanks nice guide! Hunting=1 showed me the mod is working, and alt-f7 did open the menu. Great, I will add it to the first post. So you were able to test feature of the mod ? P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste Link to comment Share on other sites More sharing options...
phrogZ Posted October 26, 2021 Share Posted October 26, 2021 Hello and thanks for this very useful mod ! I've some trouble to have it working with the latest open beta: 2.7.7.14727. RSHIFT+F7 is working as expected, but RSHIFT+F3 is not (I tried ont F-18 and F-16). Has someone the same issue? N.B. I already tried the repair option. Link to comment Share on other sites More sharing options...
westr Posted October 27, 2021 Share Posted October 27, 2021 Have a really annoying situation where this mod was working on latest OB release but ive had to reinstall dcs, now no longer working. RYZEN 7 3700X Running at 4.35 GHz NVIDIA GeForce GTX 1080Ti 32gb DDR4 RAM @3200 MHz Oculus CV1 NvME 970 EVO TM Warthog Stick & Throttle plus 11" extension. VKB T-Rudder MKIV Link to comment Share on other sites More sharing options...
Recommended Posts