Jump to content

3Dmigoto VR mod for DCS : Label masking, color enhancement, sharpen, FXAA, copy/paste of radio MSG,....


Recommended Posts

2 hours ago, Hive said:

 

@lefuneste01 I did some further testing and can confirm what Blackdog is describing for the A-10CII and Reverb G2. As soon as the TGP shows an image on the MFD, the NVG starts to flicker on the left eye and the convergence seems to change back to default until the TGP is no longer on an MFD. When I do not adjust the convergence values in the first place via the menu, the flicker does not occur even with TGP on the MFD. Below you will find a track file where I switched between MFD pages to start and stop the flickering. Perhaps it helps. Thanks!

NVG Flicker by Hive.trk 1.15 MB · 0 downloads

I postes a version that should fix the bug here : https://forum.dcs.world/topic/207154-3dmigoto-vr-mod-for-dcs-label-masking-color-enhancement-sharpen-fxaa-copypaste-of-radio-msg/?do=findComment&comment=4969535   Can you try it and confirm there is no side effects ?

 


Edited by lefuneste01
  • Like 1

P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro.

I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste

Link to comment
Share on other sites

4 hours ago, lefuneste01 said:

I postes a version that should fix the bug here : https://forum.dcs.world/topic/207154-3dmigoto-vr-mod-for-dcs-label-masking-color-enhancement-sharpen-fxaa-copypaste-of-radio-msg/?do=findComment&comment=4969535   Can you try it and confirm there is no side effects ?

 

 

Thank you very much for the fix. I will check it out later. Blackdogs experience is already promising.

Can I keep my 3DMigoto settings when using the fix?

Link to comment
Share on other sites

Is this compatible with the Kneeboard from VAICOM?  Being able to add FXAA is appealing, but I don't need the functions for copying and pasting coordinates and that sort of thing.  One more question, it appears to be compatible with the F18, but it doesn't specifically say that in the description...

Thanks in advance!

 


Edited by KevyKevTPA
Triple post!
Link to comment
Share on other sites

7 hours ago, KevyKevTPA said:

Is this compatible with the Kneeboard from VAICOM?  Being able to add FXAA is appealing, but I don't need the functions for copying and pasting coordinates and that sort of thing.  One more question, it appears to be compatible with the F18, but it doesn't specifically say that in the description...

Thanks in advance

The only feature linked to plane is reflection setting, because a lot of plane have specific shaders (even if dôme are shared). As I have the F18, I include it in my mid building and testings.

P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro.

I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste

Link to comment
Share on other sites

52 minutes ago, *Rage* said:

The mod installs ok for me and I followed the trouble shoot guide but it doesnt seem that I can remove haze. Dropping it to 0 still makes no difference in game

 

The last OB broke this feature too...

P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro.

I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste

Link to comment
Share on other sites

Applied it via OvGME and now I can't remove it.My DCS will crash on start up every time this is not active.

Used uninstall.bat with same effect.

Starting in 2D I will get Error opening  DCS World/bin/d3dx.ini


Edited by admiki
Link to comment
Share on other sites

1 hour ago, admiki said:

Applied it via OvGME and now I can't remove it.My DCS will crash on start up every time this is not active.

Used uninstall.bat with same effect.

Starting in 2D I will get Error opening  DCS World/bin/d3dx.ini

 

It means the d3d11.dll has not been removed by OvGME. It should have been removed by the .bat, I'll have a look, Of course you can not remove the mod when DCS is launched...

P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro.

I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste

Link to comment
Share on other sites

22 minutes ago, lefuneste01 said:

It means the d3d11.dll has not been removed by OvGME. It should have been removed by the .bat, I'll have a look, Of course you can not remove the mod when DCS is launched...

Yeah I know that. 

Something is still messed up with Syria map (one at which I was flying). All other maps start fine, this throws error and crashes DCS.

Link to comment
Share on other sites

I do not use any mod manager. I know I am bad. I install this one at the very last. So far it is okay.

VR Flight Guy in PJ Pants -- this is how I fly. We do not fly at treetop height, we fly between trees(TM)

YouTube: https://www.youtube.com/channel/UCc9BDi-STaqgWsjNiHbW0fA

My simple missions: https://forum.dcs.world/topic/284071-vr-flight-guy-in-pj-pants-simple-missions/

NSRI - National Strategy Research Institution, a fictional organisation based on wordplay of Strategic Naval Research Institution (SNRI), a fictional institution appears in Mobile Suit Gundam UC timeline.

Link to comment
Share on other sites

2 hours ago, admiki said:

Yeah I know that. 

Something is still messed up with Syria map (one at which I was flying). All other maps start fine, this throws error and crashes DCS.

It seems strange to me that mod is doing that, because the only shader linked to map are for shadows and I chevked the mod for all laps to find them... But can you post a track ?

P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro.

I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste

Link to comment
Share on other sites

  • 3 weeks later...

@lefuneste01, I have a clean install of 16.3 for OXR to match DCS version. I reset some some minor color changes as I had before, but adjusting haze up or down appears to have no effect. It did before with earlier version. Do you know if there is an issue with haze with 16.3 OXR and stable 2.7.14.24228 ?


Edited by johnbowzer
spelling

Intel i5-12600K | RTX4080 Super OC 16GB | 64GB 3600 MHz RAM | M.2 SSDs | Meta Quest 3

Link to comment
Share on other sites

12 hours ago, johnbowzer said:

@lefuneste01, I have a clean install of 16.3 for OXR to match DCS version. I reset some some minor color changes as I had before, but adjusting haze up or down appears to have no effect. It did before with earlier version. Do you know if there is an issue with haze with 16.3 OXR and stable 2.7.14.24228 ?

 

I do not have the stable installed on my PC, not enough space....In theory the mod was working for the beta before it went in stable, but there may be an issue...I'll try to make room and check.

P8700K @4.8 GHz, 3080ti, 32 GB RAM, HP reverb Pro.

I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste

Link to comment
Share on other sites

14 hours ago, johnbowzer said:

@lefuneste01, I have a clean install of 16.3 for OXR to match DCS version. I reset some some minor color changes as I had before, but adjusting haze up or down appears to have no effect. It did before with earlier version. Do you know if there is an issue with haze with 16.3 OXR and stable 2.7.14.24228 ?

 

I've noticed the same on latest OB.

Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC  | Samsung 970 Evo 2TB NVME | HP Reverb G2 | DIY Head Tracker Cap | Logitech X-56 throttle | VKB NXT Premium |  Win 11

"Any sufficiently advanced technology is indistinguishable from magic."

--Arthur C Clark

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...