ciox Posted October 8, 2019 Share Posted October 8, 2019 The animation of the left wheel is blocking the spin while braking at landing. Also no rubber trail on the airfield is shown if the wheels are blocked Link to comment Share on other sites More sharing options...
F16FLCS-SME Posted October 13, 2020 Share Posted October 13, 2020 I tested it today. ANTI SKID switch was in the ANTI SKID position. The wheels seems to be locked (fully stopped) during full braking. This is wrong as the anti skid system function is to prevent just that. It seems as if the anti skid system is operating in pulsating mode. Skid marks however, do appear, but seem to be alternating between the right and left wheel. If the right wheel stops (as seen by the skid marks), the aircraft should turn right and if the left brake stops, the aircraft should turn left. I used the W keyboard command to apply both brakes and the aircraft keeps almost centerline while braking, so I don't understand why it seems like a differntial braking. Here is a track file. http://www.mediafire.com/file/vv9o9cubntos372/SKID+MARKS.trk/file Link to comment Share on other sites More sharing options...
Recommended Posts