hhatch Posted February 9, 2020 Posted February 9, 2020 I just got back into DCS after a long absence. I reinstalled DCS from steam and have started to reeducate myself of the A 10c. The problem I have is that the plane after a few minutes rolls very sharply to the left and cannot be corrected with trim. It's almost uncontrollable. This does not happen when I fly the SU 25T. I checked axis mapping and found no conflicts. My loadout is balanced. The centering of my stick looks fine. I am using a Thrustmaster T 16000 stick and am not using pedals. I spent a good deal of time doing searches here and so far cannot find a solution. I still suspect a mapping problem but can't figure out what it might be. I wasn't sure where to post this since I am not sure whether this is an A 10c problem or not.
razo+r Posted February 9, 2020 Posted February 9, 2020 Can you give us a track or video so we can see what you are doing?
hhatch Posted February 10, 2020 Author Posted February 10, 2020 This is a video I made showing the problem. The plane starts to roll at about 10:25. I took my hand off the stick a couple of times to show the severity of the roll. In this case I used [YOUTUBE] "instant action" which was just a free flight option. I did not manipulate anything other than trim and I shot a few rounds from the gun. I'm not sure if this will provide much info, but for what it's worth here it is. I hope I did this right.
lobo Posted February 10, 2020 Posted February 10, 2020 Looks like rudder input... I would double check that you have no control axis conflicts. Lobo's DCS A-10C Normal Checklist & Quick Reference Handbook current version 8D available here: http://www.digitalcombatsimulator.com/en/files/172905/
hhatch Posted February 10, 2020 Author Posted February 10, 2020 After I posted the video I did some more looking. There was a rudder issue and I found what appeared to be some possible mapping conflicts. I did some adjustments and flew for 35 minutes without incident. Trimming is touchy, but from my memory it was before. I think I am on my way to solving this problem. Thanks for helping out.
unknown Posted February 10, 2020 Posted February 10, 2020 After I posted the video I did some more looking. There was a rudder issue and I found what appeared to be some possible mapping conflicts. I did some adjustments and flew for 35 minutes without incident. Trimming is touchy, but from my memory it was before. I think I am on my way to solving this problem. Thanks for helping out. If you have something like that again in any module you could bring up the controls indicator with "right ctrl + enter", there you can see what axis is doing what. Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings
fatboy Posted February 10, 2020 Posted February 10, 2020 Severe rudder issue.Hope you get it sorted.:thumbup: MODULES: A10C Warthog,AH-64 D APACHE,AJS Viggen,AV8B Harrier,BF109 K4,C101 Aviojet,F14 Tomcat,F15E Eagle,F16 Viper,F5 Tiger,F86 Sabre,FA18C Hornet,FW190A8,FW190D9,I16 Ishak,JF17 Thunder,KA50 Blackshark,L39Albatros,Mirage2000C,Mirage F-1,MI24P,MI8MVT2,MIG15BIS,MIG19P,MIG21BIS,Mosquito FB VI,P51D Mustang,P47D Thunderbolt,SA342 Gazell,SpitfireIX,TF51D,UH1H Huey,Yak52. OTHER:Flamming cliffs,Combined Arms,WW2 Assets Pack,SuperCarrier. TERRAINS: Nevada,Caucasus,Normandy,Persian Gulf,Syria,Channel,Marianas.
Recommended Posts