Tempest Posted July 2, 2020 Share Posted July 2, 2020 Title says it all. Only seen it used by M2000 YouTube landing at Caucasus. airfield. Link to comment Share on other sites More sharing options...
gorgar0 Posted July 2, 2020 Share Posted July 2, 2020 This hints that it's available on Nellis: https://forums.eagle.ru/showpost.php?p=2616581&postcount=14 Link to comment Share on other sites More sharing options...
Tempest Posted July 3, 2020 Author Share Posted July 3, 2020 Thanks. Looks like the key is you have to have a waypoint on the runway for it to work. Link to comment Share on other sites More sharing options...
ZHeN Posted July 3, 2020 Share Posted July 3, 2020 not just any waypoint, but a "LANDING"-type waypoint which can only be created in the mission editor if you created a waypoint on the runway during the flight, synthetic runway ain't gonna work [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Bartacomus Posted July 3, 2020 Share Posted July 3, 2020 cant you manually input one? Or is that supposed to be done by ground crew. If i remember right to use it has to be programmed into your waypoints. Link to comment Share on other sites More sharing options...
DmitriKozlowsky Posted July 3, 2020 Share Posted July 3, 2020 Works in Georgia, Russia, and Nevada. Should work on any runway in PG that has an ILS. Just as review synthetic runway. To see it and use it the following must be satisfied; Runway needs to have ILS with XXX.XX format. Runway needs to be the last waypoint. Could also be rearm/refuel field, but I am not sure on that. In M2KC cockpit ILS needs to be set to same freq as runway and must be ON. Note that some fields only have ILS in one direction. Nav system waypoint needs to be at last waypoint. Satisfy requirements of waypoint, ILS freq, APP Nav mode, and distance to rwy. You should have intercepted the glideslope by the time synthetic runway is drawn. At Nellis , it appears, that only 21L runway has ILS compatible with Mirage. But the landing runway may not be 21L. The rule if departing from Nellis, is that one of 21 runways is departure, other is recovery. If you took off from 21L, land on 21R and vice versa. ATC does not tell you which runway to use L or R. You have to figure it out by yourself. APP mode is ON. Adjust seat height to compensate for HUD reprojection in APP mode. Synthetic runway will be draw on last 10nm from runway, Final approach. Gear should be down. Approach speed , normally 150-180 kn, with 130 kn at runway threshold. Synthetic runway stops being drawn at runway threshold. Link to comment Share on other sites More sharing options...
Tempest Posted July 3, 2020 Author Share Posted July 3, 2020 Thanks for a really great and detailed reply. Link to comment Share on other sites More sharing options...
Schlomo1933 Posted November 3, 2020 Share Posted November 3, 2020 cant you manually input one? Or is that supposed to be done by ground crew. If i remember right to use it has to be programmed into your waypoints. Its supposed to be done in flight. But razbam dont get it to work..... Link to comment Share on other sites More sharing options...
Recommended Posts