RogueSqdn Posted September 26, 2020 Share Posted September 26, 2020 (edited) I wasn't planning on overclocking at all with a card as powerful as the 3090, so I suppose I should be fine. The XC3 3090 has only four POSCAPs, so I should still be able to OC if desired. It'll depend on performance in VR when I get the Reverb G2 preorder... I'm inclined to think overclocking won't make that much of a difference (not with a Ryzen 3950X, 64GB 3200MHz RAM, and DCS being stored on a Seagate Firecuda M.2 running on PCIe 4). Edited September 26, 2020 by RogueSqdn DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders) Link to comment Share on other sites More sharing options...
Snake122 Posted September 26, 2020 Share Posted September 26, 2020 I wasn't planning on overclocking at all with a card as powerful as the 3090, so I suppose I should be fine. The XC3 3090 has only four POSCAPs, so I should still be able to OC if desired. It'll depend on performance in VR when I get the Reverb G2 preorder... I'm inclined to think overclocking won't make that much of a difference (not with a Ryzen 3950X, 64GB 3200MHz RAM, and DCS being stored on a Seagate Firecuda M.2 running on PCIe 4). If you watch the JayzTwoCents video, the cards boost clock on their own, while ~1715mhz is all that is guaranteed, they all go higher as the card senses they can. You may even have to underclock a stock card and a permanent fix would be a GPU bios update. I haven't been paying attention to that angle so I haven't been noticing how high the clocks have been going in reviews to know how the overall performance is dependent on this feature. I7-9700KF@5ghz, 32GB DDR4 3200, RTX 3090, Pimax 5k+, Virpil T-50CM2 base with Warthog, F/A-18, T-50cm, and VFX grips, Saitek X65F, Saitek Switch Panel, TM Cougar MFDs, TM TPR pedals, JetSeat and bass pucks, H640P for VRK, PointCtrl 3rd Space Vest project for basic G Seat/G Suit simulation Link to comment Share on other sites More sharing options...
RogueSqdn Posted September 26, 2020 Share Posted September 26, 2020 I was getting the impression that the instability was limited to cards with 5 or 6 POSCAPs. Do you have a time stamp where he discusses your point? Sent from my iPhone using Tapatalk Pro DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders) Link to comment Share on other sites More sharing options...
dburne Posted September 26, 2020 Share Posted September 26, 2020 Statement from EVGA on the POSCAPS issue. https://forums.evga.com/Message-about-EVGA-GeForce-RTX-3080-POSCAPs-m3095238.aspx Seems their cards should be in the clear. Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
boedha68 Posted September 26, 2020 Share Posted September 26, 2020 Well all manufactures are aware. See videocardz.com. problems and response. No worries. :D New system:I9-9900KS, Kingston 128 GB DDR4 3200Mhz, MSI RTX 4090, Corsair H150 Pro RGB, 2xSamsung 970 EVO 2Tb, 2xsamsung 970 EVO 1 TB, Scandisk m2 500 MB, 2 x Crucial 1 Tb, T16000M HOTAS, HP Reverb Professional 2, Corsair 750 Watt. Old system:I7-4770K(OC 4.5Ghz), Kingston 24 GB DDR3 1600 Mhz,MSI RTX 2080(OC 2070 Mhz), 2 * 500 GB SSD, 3,5 TB HDD, 55' Samsung 3d tv, Trackir 5, Logitech HD Cam, T16000M HOTAS. All DCS modules, maps and campaigns:pilotfly: Link to comment Share on other sites More sharing options...
imacken Posted September 26, 2020 Share Posted September 26, 2020 I might be wrong, but from what I can see, this doesn't affect any EVGA 3090s which is what we are talking about here. Intel i7 12700K · MSI Gaming X Trio RTX 4090 · ASUS ROG STRIX Z690-A Wi-Fi · MSI 32" MPG321UR QD · Samsung 970 500Gb M.2 NVMe · 2 x Samsung 850 Evo 1Tb · 2Tb HDD · 32Gb Corsair Vengance 3000MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · Tobii Eye Tracker 5 · Thrustmaster F/A-18 Hornet Grip · Virpil MongoosT-50CM3 Base · Virpil Throttle MT-50 CM3 · Virpil Alpha Prime Grip · Virpil Control Panel 2 · Thrustmaster F-16 MFDs · HTC Vive Pro 2 · Total Controls Multifunction Button Box Link to comment Share on other sites More sharing options...
boedha68 Posted September 26, 2020 Share Posted September 26, 2020 I might be wrong, but from what I can see, this doesn't affect any EVGA 3090s which is what we are talking about here. Well there are so good as no rtx 3090 in the wild right now! :D New system:I9-9900KS, Kingston 128 GB DDR4 3200Mhz, MSI RTX 4090, Corsair H150 Pro RGB, 2xSamsung 970 EVO 2Tb, 2xsamsung 970 EVO 1 TB, Scandisk m2 500 MB, 2 x Crucial 1 Tb, T16000M HOTAS, HP Reverb Professional 2, Corsair 750 Watt. Old system:I7-4770K(OC 4.5Ghz), Kingston 24 GB DDR3 1600 Mhz,MSI RTX 2080(OC 2070 Mhz), 2 * 500 GB SSD, 3,5 TB HDD, 55' Samsung 3d tv, Trackir 5, Logitech HD Cam, T16000M HOTAS. All DCS modules, maps and campaigns:pilotfly: Link to comment Share on other sites More sharing options...
Waxer Posted September 26, 2020 Share Posted September 26, 2020 I just watched this because the XC3 is the 3090 that FalconNW is using. Glad he was using EVGA as a good example, not a bad one. His video is of 3080's, though... I wonder what the situation is with 3090's. EDIT: Found POSCAP counts on Reddit. 3070 [TABLE]AIB Model MLCC Groups POSCAPs Source Asus Dual 4 Asus Asus Dual OC 4 Asus Asus Strix 4 Asus Asus Strix OC 4 Asus [/TABLE] 3080 [TABLE]AIB Model MLCC Groups POSCAPs Source - Founders Edition 2 4 TechPowerUp, Gamers Nexus Asus TUF 6 0 Asus Asus TUF OC 6 0 TechPowerUp, der8auer Asus Strix 6 0 der8auer Asus Strix OC 6 0 Asus Colorful iGame Advanced OC 0 6 JayzTwoCents 1 EVGA XC3 Black 1 5 EVGA announcement 2 EVGA XC3 1 5 EVGA announcement 2 EVGA XC3 Ultra 1 5 EVGA announcement 2 EVGA FTW3 2 4 EVGA announcement 2 EVGA FTW3 Ultra 2 4 EVGA announcement 2, /u/notsymmetrical Gainward Phoenix 1 5 r/nvidia mod table Galax Black 1 5 r/nvidia mod table Gigabyte Gaming OC 0 6 JayzTwoCents Inno3D iChill X3 1 5 r/nvidia mod table Inno3D iChill X4 1 5 r/nvidia mod table MSI Ventus OC 1 5 /u/finautobiography MSI Gaming X Trio 1 5 TechPowerUp, AHOC, Optimum Tech Palit Gaming Pro OC 1 5 TechPowerUp PNY XLR8 Epic 1 5 /u/kittyzen comment 3 Zotac 4 X-Gaming 0 6 r/nvidia mod table Zotac 4 Trinity 0 6 TechPowerUp, AHOC[/TABLE] 3090 [TABLE]AIB Model MLCC Groups POSCAPs Source - Founders Edition 2 4 Gamers Nexus Asus TUF 6 0 Asus Asus TUF OC 6 0 KitGuruTech Asus Strix 6 0 Asus Asus Strix OC 6 0 TechPowerUp EVGA XC3 Black 2 4 EVGA announcement 1 EVGA XC3 2 4 EVGA announcement 1 EVGA XC3 Ultra 2 4 EVGA announcement 1 EVGA FTW3 2 4 EVGA announcement 1 EVGA FTW3 Ultra 2 4 EVGA announcement 1, HD Technologia Gigabyte Eagle OC 0 6 TechPowerUp Gigabyte Gaming OC 0 6 der8auer MSI Ventus OC 2 4 r/nvidia mod table MSI Gaming X Trio 2 4 TechPowerUp, Guru 3D Palit Gaming Pro OC 2 4 Guru 3D Zotac 2 X-Gaming 0 6 r/nvidia mod table Zotac 4 Trinity 0 6 TechPowerUp[/TABLE] Good data. Thank you mate. If I get one of these rather than Navi 21, then I will either go Founders, Asus TUF, Asus Strix. Maybe FTW3 if I can get one without paying silly prices or waiting til 2021! [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
RogueSqdn Posted September 26, 2020 Share Posted September 26, 2020 Anyone planning on getting the 3090 for VR? I’m going to call FalconNW as soon as they open to confirm the 3090 card they’re using and the POSCAP situation. EVGA looks to be in the clear but I want to confirm. Sent from my iPhone using Tapatalk Pro DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders) Link to comment Share on other sites More sharing options...
Baldrick33 Posted September 26, 2020 Share Posted September 26, 2020 In the other thread Harlikwin you asked me about the test conditions, so I will reply here. I did not have a chance to really even get into the card. I brought an SSD with DCS on it and one of my Reverbs. After farting around for about 40 min to get shit set up, I flew the three test missions I always fly, the P-51 at Batumi, the Su-27 over Dubai and the Hornet on the Condition III approach (at night). The settings were almost everything set to the max. The results were: P-51 at Batumi - The 3090 displayed a FPS increase of 41% over the 2080 Ti. (For example, my 2080 Ti at home hangs at around ~ 30 FPS but the 3090 averaged about 42 to 43 FPS.) Su-27 over Dubai - The 3090 displayed a FPS increase of 28% over the 2080 Ti Hornet at night - The 3090 displayed a FPS increase of 34% over the 2080 Ti. That is all I got to do before I got booted off :) It was rough and dirty and I am not sure when I can steal some of their time away again.Can you not persuade them to let you borrow the card for the weekend? :) Interesting figures but when I look at my usage in free flight missions the GPU (2080Ti) is causing reprojection. So a 3090 might well resolve that. However the moment I do anything a bit more involved than a couple of aircraft the CPU (8600K@4.8 ) shoots up and is the bottleneck which I believe no amount of GPU is going to fix. It would be nice to a wider range of tests but appreciate you only had a very limited amount of time. AMD 5800X3D · MSI 4080 · Asus ROG Strix B550 Gaming · HP Reverb Pro · 1Tb M.2 NVMe, 32Gb Corsair Vengence 3600MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · VIRPIL T-50CM3 Base, Alpha Prime R. VIRPIL VPC Rotor TCS Base. JetSeat Link to comment Share on other sites More sharing options...
Snake122 Posted September 26, 2020 Share Posted September 26, 2020 I was getting the impression that the instability was limited to cards with 5 or 6 POSCAPs. Do you have a time stamp where he discusses your point? Sent from my iPhone using Tapatalk Pro Try about 13:00. Yes, it is caused apparently by the POSCAPs, but shows itself due to GPU Boost, a standard feature: https://www.nvidia.com/en-us/geforce/technologies/gpu-boost/technology/ He talks about how the nosie of the lesser quality capacitors cause more nosie, hence the crashes at higher clock that the card does automatically (also talks about real life experience with the wireless mic causing crashes during overclock attempts). I was hoping to get my hands on an ASUS Tuf even before this but now I'm pretty doubtful since the demand will be even great for them with their capacitors. But interestingly, there is a claim out there that an array of both types at the right amounts is better since both types have their own pros and cons at different conditions. Well all manufactures are aware. See videocardz.com. problems and response. No worries. :D Problem is the companies aren't going to stop the production to change that any time soon, especially with demand. It will be a bios fix making all these cards perform more slowly. Sent from my LM-G850 using Tapatalk I7-9700KF@5ghz, 32GB DDR4 3200, RTX 3090, Pimax 5k+, Virpil T-50CM2 base with Warthog, F/A-18, T-50cm, and VFX grips, Saitek X65F, Saitek Switch Panel, TM Cougar MFDs, TM TPR pedals, JetSeat and bass pucks, H640P for VRK, PointCtrl 3rd Space Vest project for basic G Seat/G Suit simulation Link to comment Share on other sites More sharing options...
RogueSqdn Posted September 26, 2020 Share Posted September 26, 2020 (edited) Try about 13:00. Yes, it is caused apparently by the POSCAPs, but shows itself due to GPU Boost, a standard feature: https://www.nvidia.com/en-us/geforce/technologies/gpu-boost/technology/ I rewatched it from that point, and I'm still convinced that units with 2 MLCCs and 4 POSCAPs should be in the clear, especially since the FE card is using that. I should be able to call FalconNW in 3 and a half hours. EDIT: By the way, separate interjection I'd like to make... I had a new Razer Blackwidow v3 Pro wireless keyboard delivered yesterday, and I'm already over the moon about it. Great keyboard, and has onboard lighting control like the Huntsman TE, so I can use it at work without Synapse installed! :D Edited September 26, 2020 by RogueSqdn DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders) Link to comment Share on other sites More sharing options...
Snake122 Posted September 26, 2020 Share Posted September 26, 2020 I rewatched it from that point, and I'm still convinced that units with 2 MLCCs and 4 POSCAPs should be in the clear, especially since the FE card is using that. I should be able to call FalconNW in 3 and a half hours. EDIT: By the way, separate interjection I'd like to make... I had a new Razer Blackwidow v3 Pro wireless keyboard delivered yesterday, and I'm already over the moon about it. Great keyboard, and has onboard lighting control like the Huntsman TE, so I can use it at work without Synapse installed! :DI agree, just trying explain the problem. Of EVGA, only a preproduction FTW3 had 6 POSCAPs. Sent from my LM-G850 using Tapatalk I7-9700KF@5ghz, 32GB DDR4 3200, RTX 3090, Pimax 5k+, Virpil T-50CM2 base with Warthog, F/A-18, T-50cm, and VFX grips, Saitek X65F, Saitek Switch Panel, TM Cougar MFDs, TM TPR pedals, JetSeat and bass pucks, H640P for VRK, PointCtrl 3rd Space Vest project for basic G Seat/G Suit simulation Link to comment Share on other sites More sharing options...
Supmua Posted September 26, 2020 Share Posted September 26, 2020 Official EVGA statement mentioned that cards with 4 POSCAP cofiguration should be safe. The ones that failed their QC testings were the 6 POSCAP cards. PC: 5800X3D/4090, 11700K/3090, 9900K/2080Ti. Joystick bases: TMW, VPC WarBRD, MT50CM2, VKB GFII, FSSB R3L Joystick grips: TM (Warthog, F/A-18C), Realsimulator (F-16SGRH, F-18CGRH), VKB (Kosmosima LH, MCG, MCG Pro), VPC MongoosT50-CM2 Throttles: TMW, Winwing Super Taurus, Logitech Throttle Quadrant, Realsimulator Throttle (soon) VR: HTC Vive/Pro, Oculus Rift/Quest 2, Valve Index, Varjo Aero, https://forum.dcs.world/topic/300065-varjo-aero-general-guide-for-new-owners/ Link to comment Share on other sites More sharing options...
RogueSqdn Posted September 26, 2020 Share Posted September 26, 2020 Okay, I just got off the phone with Falcon Northwest. They confirm that: 1) the 3090 they are using, and I'll receive, is the eVGA XC3 Gaming. 2) none of the cards that they are using, and that eVGA sent out, have more than four POSCAPs. 3) the card will not be factory overclocked (that is my option if I so choose, which I probably will not). I think that should alleviate any concerns about eVGA 3090 cards. :thumbup: I also asked why they weren't using the nVidia Founders Edition cards, as they did with the 3080, and the 2080ti before that. The answer was because of the massive size of the card, it wouldn't have fit inside the Talon case. DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders) Link to comment Share on other sites More sharing options...
Supmua Posted September 27, 2020 Share Posted September 27, 2020 Office Depot still has some non-OC PNY 3090 cards, FYI. PC: 5800X3D/4090, 11700K/3090, 9900K/2080Ti. Joystick bases: TMW, VPC WarBRD, MT50CM2, VKB GFII, FSSB R3L Joystick grips: TM (Warthog, F/A-18C), Realsimulator (F-16SGRH, F-18CGRH), VKB (Kosmosima LH, MCG, MCG Pro), VPC MongoosT50-CM2 Throttles: TMW, Winwing Super Taurus, Logitech Throttle Quadrant, Realsimulator Throttle (soon) VR: HTC Vive/Pro, Oculus Rift/Quest 2, Valve Index, Varjo Aero, https://forum.dcs.world/topic/300065-varjo-aero-general-guide-for-new-owners/ Link to comment Share on other sites More sharing options...
Snake122 Posted September 27, 2020 Share Posted September 27, 2020 Office Depot still has some non-OC PNY 3090 cards, FYI.Not anymore Sent from my LM-G850 using Tapatalk I7-9700KF@5ghz, 32GB DDR4 3200, RTX 3090, Pimax 5k+, Virpil T-50CM2 base with Warthog, F/A-18, T-50cm, and VFX grips, Saitek X65F, Saitek Switch Panel, TM Cougar MFDs, TM TPR pedals, JetSeat and bass pucks, H640P for VRK, PointCtrl 3rd Space Vest project for basic G Seat/G Suit simulation Link to comment Share on other sites More sharing options...
STRYC Posted October 3, 2020 Share Posted October 3, 2020 One of the labs downstairs has a 3090 which they use for SC. They let me install DCS for kicks and we got to play around just a little bit (about 2 hours). In DCS the RTX 3090 averages about 41% faster than the 2080 Ti overall with the Reverb. Not enough, at least for me personally, to justify spending $1800 or more. Do you have any pics or video of that 41%? I haven't seen any benchmarks coming anywhere near 41%. Link to comment Share on other sites More sharing options...
Supmua Posted October 4, 2020 Share Posted October 4, 2020 Played Star Wars Squadron VR today and mind blown. My 2080Ti can give me 80+ fps after optimized settings, the 3090 will probably let me maximize graphic settings at higher frequency ...no CPU bottleneck in that one either. PC: 5800X3D/4090, 11700K/3090, 9900K/2080Ti. Joystick bases: TMW, VPC WarBRD, MT50CM2, VKB GFII, FSSB R3L Joystick grips: TM (Warthog, F/A-18C), Realsimulator (F-16SGRH, F-18CGRH), VKB (Kosmosima LH, MCG, MCG Pro), VPC MongoosT50-CM2 Throttles: TMW, Winwing Super Taurus, Logitech Throttle Quadrant, Realsimulator Throttle (soon) VR: HTC Vive/Pro, Oculus Rift/Quest 2, Valve Index, Varjo Aero, https://forum.dcs.world/topic/300065-varjo-aero-general-guide-for-new-owners/ Link to comment Share on other sites More sharing options...
RealDCSpilot Posted October 4, 2020 Share Posted October 4, 2020 Do you have any pics or video of that 41%? I haven't seen any benchmarks coming anywhere near 41%. Just for info, i benchmarked the raw CUDA power of my 3090 with VRay benchmark and beat a 2x2080ti rig. Nvidia's claim of twice as fast as a 2080ti is true in this area. However, rendering a frame in a dynamic game is a different beast. You'll see the whole bandwidth there, from 0% to whatever. In DCS and VR you can really push the limits with it. i9 13900K @5.5GHz, Z790 Gigabyte Aorus Master, RTX4090 Waterforce, 64 GB DDR5 @5600, Pico 4, HOTAS & Rudder: all Virpil with Rhino FFB base made by VPforce, DCS: all modules Link to comment Share on other sites More sharing options...
Waxer Posted October 4, 2020 Share Posted October 4, 2020 Wow. This user feedback is pretty exciting. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
RogueSqdn Posted October 4, 2020 Share Posted October 4, 2020 I’ll know in about a week. Sent from my iPhone using Tapatalk Pro DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders) Link to comment Share on other sites More sharing options...
RealDCSpilot Posted October 4, 2020 Share Posted October 4, 2020 @Supmua I'm running STWS Squadron on ultra settings, no problem. :) The downside is their HOTAS support, the game doesn't detect my throttle and rudder. I hope they patch this soon. i9 13900K @5.5GHz, Z790 Gigabyte Aorus Master, RTX4090 Waterforce, 64 GB DDR5 @5600, Pico 4, HOTAS & Rudder: all Virpil with Rhino FFB base made by VPforce, DCS: all modules Link to comment Share on other sites More sharing options...
dburne Posted October 4, 2020 Share Posted October 4, 2020 Played Star Wars Squadron VR today and mind blown. My 2080Ti can give me 80+ fps after optimized settings, the 3090 will probably let me maximize graphic settings at higher frequency ...no CPU bottleneck in that one either. Yeah I had a blast playing that one yesterday also. Gorgeous in VR. Well I have about decided it is time to have "a talk" later this evening with my wonderful wife , and see what kind of reaction I get when I tell her I would very much like to spend the bucks on a 3090 card. If I don't change my mind again before then which is certainly possible lol. Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
Supmua Posted October 4, 2020 Share Posted October 4, 2020 (edited) Anyone planning on getting the 3090 for VR? @Supmua I'm running STWS Squadron on ultra settings, no problem. :) The downside is their HOTAS support, the game doesn't detect my throttle and rudder. I hope they patch this soon. Use vjoy and joystick gremlin, create a virtual device (or two) with vjoy. Then setup axis, buttons via joystick gremlin, using combination of any devices you want. Edited October 4, 2020 by Supmua PC: 5800X3D/4090, 11700K/3090, 9900K/2080Ti. Joystick bases: TMW, VPC WarBRD, MT50CM2, VKB GFII, FSSB R3L Joystick grips: TM (Warthog, F/A-18C), Realsimulator (F-16SGRH, F-18CGRH), VKB (Kosmosima LH, MCG, MCG Pro), VPC MongoosT50-CM2 Throttles: TMW, Winwing Super Taurus, Logitech Throttle Quadrant, Realsimulator Throttle (soon) VR: HTC Vive/Pro, Oculus Rift/Quest 2, Valve Index, Varjo Aero, https://forum.dcs.world/topic/300065-varjo-aero-general-guide-for-new-owners/ Link to comment Share on other sites More sharing options...
Recommended Posts