KonniRichter Posted October 1, 2020 Share Posted October 1, 2020 Using the newest Beta build I got really big problems. Maybe these problems have nothing to do with the newest build. I am using a RTX2080ti @4k G-Sync Monitor. When playing DCS with high settings, my system gives me about 70-90fps. Because of using TrackIR and its refresh rate @60, I always playing DCS @60hz and setting up V-Sync ingame. This brings a nice and smooth feeling into moving the head around. I managed this by limiting the fps in DCS-settings. I tried both ways: 1. adding an autoexec file 2. setting maxfps in graphics.lua Both ways worked for me months ago and framrate was @60fps ingame. But now when using any of these methods to limit my framerate, the game only gives me about 30-35 fps and my GPU and CPU is at a max. of 50% load. There is plenty of room for my system, but game does not use the power. When disabling the fps limitation, frames go up to 70-90fps. It seems to me, that fps limiter does not work anymore for me. I hope you could help to get it working again. I have to limit my fps @60 because of tearing when using TrakIR. TIA Link to comment Share on other sites More sharing options...
speed-of-heat Posted October 1, 2020 Share Posted October 1, 2020 if you are using an nVidia gfx card you can also set the frame rate there per game. SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO Link to comment Share on other sites More sharing options...
maquez Posted October 1, 2020 Share Posted October 1, 2020 hi I have also a Trackir and I do use the Nvidia Control Panel to limit the FPS to 60 in game. set the frame limiter in the Nvidia Settings: i9 11900K, ROG STRIX Z590-E Gaming, ROG STRIX RTX 3060 TI, G.Skill Trident Z 32GB DDR4 3600Mhz, Thrustmaster T1600 Flight Pack, TrackIR 5 Hardware Benchmark A-10C, AJS-37, AV-8B, F-14B, F-16C, F-5E, F-86F, F/A-18C, FC3, JF-17, Ka-50, M-2000C, Mi-8MTV2, Mi-24P, MiG-15bis, MiG-21bis, SA342, UH-1H, Persian Gulf, Syria, NTTR, Combined Arms Steam Profile, Twitch, Youtube Link to comment Share on other sites More sharing options...
KonniRichter Posted October 1, 2020 Author Share Posted October 1, 2020 Thanks! I forgot about the control panel. I will try! But strange that it isn´t working with lua or autoexec anymore for me. Link to comment Share on other sites More sharing options...
PAWS Posted October 6, 2020 Share Posted October 6, 2020 @KonnieRichter I would suggest to not edit the graphics.lua to change the Maxfps; I did the same exact thing and caused the same issue. Some reason, it makes DCS run @30fps if set at 60. I reinstalled DCS and changed the fps in Nvidia control panel. Still...I just like you are having performance issues with a high end rig!. Link to comment Share on other sites More sharing options...
Harker Posted October 10, 2020 Share Posted October 10, 2020 If you have a G-sync monitor, turn off V-sync in-game. Limit the fps to 60 via the Nvidia panel, turn V-sync and G-sync on via the Nvidia panel and you should be good to go. I run a 2080 Ti on a 4K/60Hz G-sync monitor and the above works for me. The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
Recommended Posts