ChickenSim Posted November 17, 2020 Posted November 17, 2020 INS Designation TDC controls not working as described. INS Designation should appear when TDC is pressed and released (aka "action position"). Once the INS Designation exists, there should be two different slew rates depending on whether the TDC is held down ("action slewing") or not ("no-action slewing"). Action slewing should have a higher slew rate than no-action slewing, which is used for refinement. Tapping the TDC if an INS Designation already exists should not re-center it to the Velocity Vector. This should require undesignating first, and then pressing the TDC again. ref. TACMAN Vol I, pg. 2-43 - 2-44, 2.4.2 and Fig. 2-40INS DESG.trk "It is also true that we parted ways with Chicken after some disagreements."
ChickenSim Posted November 17, 2020 Author Posted November 17, 2020 Related: - INS TD Diamond missing dot in center indicating it is the selected sensor (TACMAN Vol I, pg. 2-43, Fig. 2-39) - INS does not appear at top left of EHSD, indicating it is the selected sensor (TACMAN Vol I, pg. 2-46, Fig. 2-42)INS SYMBOLS.trk "It is also true that we parted ways with Chicken after some disagreements."
RAZBAM_ELMO Posted January 13, 2021 Posted January 13, 2021 Reported and tracking previously, had not marked. Apologies Know and use all the capabilities in your airplane. If you don't, sooner or later, some guy who does use them all will kick your ass. — Dave 'Preacher' Pace, USN.
RAZBAM_ELMO Posted February 8, 2021 Posted February 8, 2021 Functioning in latest OB update. Marking as RESOLVED and moving to RESOLVED Know and use all the capabilities in your airplane. If you don't, sooner or later, some guy who does use them all will kick your ass. — Dave 'Preacher' Pace, USN.
Recommended Posts