Jump to content

JanJan revolutionary plugin for Voice Attack for F16 & FA-18

karpiyon

By karpiyon
in DCS Modding

 Share

Recommended Posts

karpiyon

karpiyon

Posted
Posted (edited)

Hi,

I've developed a new plugin for the F16 & FA-18 which is working with VoiceAttack (32/64bit Full versions only)

You can see a demos here,

It has over 50K commands.

Download from JanJan discord server

It can do the following:

  • Vocal commands to control the entire cockpit.
  • Perform ALL the radio communication commands
    you can say:
    • Flight, attack air defenses
    • Texaco, request rejoin
    • Inboud for landing
    • Checkin 15 minutes
    • Ready to copy
    • ...all of them
  • Commands to control external views.
  • Control the simulators and more.

 

In addition, and this is the main strength of this plugin, it has other special complex command to perform other tasks.

E.g.:

  • Set ILS to any airport you select without specifying the frequency.
    After 'selecting' the airport you can ask for it's available runways and say set ILS for runway 26 left say
  • Set TACAN frequency. 
    Either set Tblisi tacan or set tacan channel 126 yankee followed by set tacan mode air/ground
  • Set  HSI course
  • Set Backup UHF frequency
  • Ask for a vector to the nearest airport
  • Report external/Internal fuel level
  • Set Com1/Com2 radio frequencies
  • Set QNH
  • Set and tune illumination for all available instruments
  • Show/Hide and toggle kneeboard

 

I also added many dynamic checks e.g.:

  • Check that fuel flow is below your threshold value
  • Verify airspeed is below your threshold before lowering the landing gear
  • Verify speed brakes are closed

 

Below are just a few of the complex commands:
image.png

null

image.png

image.png

image.png

image.png

image.png

image.png

image.png

image.png

JanJan_VA_plugin_for_DCS.pdf

 

 

                 RECENT UPDATES

1.1.4.0
        * Fixed bug related to user key checkbox.
        * Added missing dcs-bios files which are needed for it's operation.

1.1.1.8
*        Adding config option to run FLCS bit test during startup.
*        Adding command to set laser start time, if you think 5 to 30 sec is not enough let me know,
        *set [laser;tgp] start [time;] [5..30][seconds;]*
*        Fixed MFD loading sequence - once in a while the F-16 MFD code gets updated, which effects the MFD commands.

1.0.35.0
*        Adding an option under *Commands* Tab to use 'recenter VR Headset'.
        This will stop the view from recentering every time the plugin tries to 'press' Num5. 
        See doc or tool tip for further instructions.
*       Fixing command parser which may have not read commands from general keyfile properly.

1.0.34.0
*        **Adding Mariana Islands Support**
*        Fix bug when reading keyfiles
*        Updating/fixing typos in commands

1.0.33.0
*        Fixed model not selected properly on fresh install
*        Fixed DCS export when variables are not defined

1.0.32.0
*        Update profile
*        Update DCS-BIOS version
*        Fixed but with prevented reading data in 2.72 from ramp

1.0.30.0
*        Supporting VAx64

1.0.10.0
*        **Adding support for the 'Filter Phrase' command in 3D including VR.**
*        See plugin doc for this new feature and how to setup & enable it.
*        Modified *Show comm menu* command to prevent possible bug when using VAICOM
*        Saving selected option for Backup tab in Config Form
*        Adding config options to specify DCS saved game folder
*        Added vocal notification to set laser code

 

 


Edited by karpiyon
Adding recent updates and videos
  • Like 1
Link to comment
Share on other sites
  • 5 weeks later...
  • 2 months later...
karpiyon

karpiyon

Posted
  • Author
Posted

Updated and added many new features to the plugin.

Apart from controlling the entire cockpit you can:

  • Set ILS to any airport you select without specifying the frequency.
  • Set TACAN frequency
  • Set  HSI course
  • Set Backup UHF frequency
  • Change external views
  • Vector to nearest airport
  • Report external/Internal fuel level

 

I also added many dynamic checks e.g.:

  • Check that fuel flow is below your threshold value
  • Verify airspeed is below your threshold before lowering the landing gear
  • Verify speed brakes are closed

 

+ many more

 

Download here: Discord Link

 

 

  • Like 2
Link to comment
Share on other sites
  • 1 month later...
  • 2 weeks later...
  • 3 weeks later...
  • 1 month later...
  • 3 months later...
karpiyon

karpiyon

Posted
  • Author
Posted

New updates for the plugin which amongst other include: 

*       Updated Doc
*       Updated Registration Form - DCS/BMS is now automatically added as prefix to the key. 
*       Added *Master Mode Detection*. Plugin will now detect the MasterMode before running related commands.
        - E.g. before loading default MFD pages it will detect and set MasterMode to Nav.
        - When Selecting to jettison tanks it will detect and set SMS/S-J page.
*       Added Maverick Boresight command sequence: (Maverick needs to be sleeted and powered on)
        *[init;set;start][tgp;targeting pod][bore;boresight][sequence;proc;procedure]*
        It will:
			> Set master mode to AG, 
			> RMFD - SMS - OSB14 set mode PRE
			> RMFD - WPN - OSB12 select
			> LMFD - TGP - OSB12 set mode to AUTO (SOI)
*       Added vocal command to press *boresight* (RMFD-OSB20)
*       Added a new command to store the 'selected airport' as STPT#30 and select it. Use:
        *store [selected;][airport;airfield];store [selected;][airport;airfield] as [nav point;steerpoint]*
		After that you can say: *Inbound for landing*, followed by *Set course...* & *Set nav mode tacan*
*       Added option to "Set speed limit *current*". Can be useful when you are the leader of a formation.
*		Added config option to filter only 'Blue' side airports for *Say nearest airport* command.
*		Fixed potential bug related to autopilot commands

 

Link to comment
Share on other sites
  • 3 months later...
  • 2 weeks later...
  • 2 months later...
VirusAM

VirusAM

Posted
Posted

cool, are you planning support for other modules (F18 or others)?

🖥️ R7-5800X3D 64GB RTX-4090 LG-38GN950  🥽  Valve Index 🕹️ VPForce Rhino FFB, Virpil F-14 (VFX) Grip, Virpil Alpha Grip, Virpil CM3 Throttle + Control Panel 2, Winwing Orion (Skywalker) Pedals, Razer Tartarus V2 💺SpeedMaster Flight Seat, JetSeat

CVW-17_Profile_Background_VF-103.png

Link to comment
Share on other sites
  • 4 weeks later...
karpiyon

karpiyon

Posted
  • Author
Posted

I updated the plugin to the newest DS version

1.1.1.8
*        Adding config option to run FLCS bit test during startup.
*        Adding command to set laser start time, if you think 5 to 30 sec is not enough let me know,
        *set [laser;tgp] start [time;] [5..30][seconds;]*
*        Fixed MFD loading sequence - once in a while the F-16 MFD code gets updated, which effects the MFD commands.

Link to comment
Share on other sites
  • karpiyon changed the title to JanJan revolutionary plugin for Voice Attack for F16 & FA-18
  • 3 months later...
karpiyon

karpiyon

Posted
  • Author
Posted

    ** TURN THE MUSIC  ON**
        You use JanJan plugin to play music while in the pit.
        You can selet up to 4 directories containing music or up to 4 playlists.
        When you select a folder, all media in this folder will be add for a temp playlist.
        You can choose to play the selected playlist/folder or:[start play;start playing;paly][playlist;play list] [number;] [1;2;3;4]
        Thesea are the available Player commands:

  •         play [music;songs];start playing [music;songs]
  •         stop [music;songs];stop playing [music;songs]
  •         turn music [volume;] up;music volume up
  •         turn music [volume;] down;music volume down
  •         play next [track;song];continue playing
  •         [pause;hold] music; un pause music
  •         [start play;start playing;paly][playlist;play list] [number;] [1;2;3;4]

        (I think) VLC needs to be installed on your system in order to create a playlist.

Link to comment
Share on other sites
  • 3 months later...
karpiyon

karpiyon

Posted
  • Author
Posted

1.2.0.0
        ** Adding Scratchpad support **
        ** Adding Config Tab to set CMDS defaults **
        * Speed up ICP/MFD commands execution time.
        * Preventing wrong data entries when closing teh config form.
        * Adding Startup option to load CMS default during Startup/Startup Hot/Load defaults while in the air
        * Adding options to add CARA Alow & MLS Floor levels to startup sequence.
        * Adding an option to replay the same song.
        * Fixing wrong coordinates when entering Lat/Long. 
        * Add checker for wrong config values
        * Adding command to select Guns in A/G mode
        * Adding command to set Guns range
        * Adding commands to clutter/declutter the HUD
        * Adding config option to set Debug Mode
        * Adding config button to Reset the active profile
        * Adding config button and vocal command to open VA command log 
        * Added new command to load your cockpit default when you start a mission in the air.
        * Added command *"[say;report][airport;airfiled][runway;runways]"* This will report the 'selected' airfield runways.
        * Added config option to select the STPT to store the "selected runway"
        * Added commands to move seat up/down
        * Fixed wrong Lat/Long entries for West Coord (NAVADA)
        * Added config buttons to "Show All Phrases" & "Show Theater data" 

 

null

image.png

image.png

image.png

image.png

Link to comment
Share on other sites
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...