Andrei Posted January 28, 2021 Share Posted January 28, 2021 Greetings! I wonder if anyone has stumbled upon the same problem with Reverb G2. All of a sudden, without any obvious changes the headset has developed a problem tracking head position in longitudinal / lateral and vertical axes. The problem manifests itself in slight jittering when keeping head still. When I look around, e.g. turn head 90* left or right I see that the camera starts slowly creeping forward, even though I don't change the position of my head. This is causing quite a lot of issues when looking around, having to constantly reset the head position. Like I mentioned, it started happening out of the blue. There where no changes in drivers, settings or lightning conditions. I have re-calibrated the gaming space in WMR settings, but that did not help with the problem. Any ideas or tips? AMD R7 5800X3D | Aorus B550 Pro | 32GB DDR4-3600 | RTX 4080 | VKB MGC Pro Gunfighter Mk III + Thustmaster TWCS + VKB T-Rudder Mk4 | HP Reverb G2 FC3 | A-10C II | Ка-50 | P-51 | UH-1 | Ми-8 | F-86F | МиГ-21 | FW-190 | МиГ-15 | Л-39 | Bf 109 | M-2000C | F-5 | Spitfire | AJS-37 | AV-8B | F/A-18C | Як-52 | F-14 | F-16 | Ми-24 | AH-64 NTTR | Normandy | Gulf | Syria | Supercarrier | Link to comment Share on other sites More sharing options...
timcat Posted January 29, 2021 Share Posted January 29, 2021 The camera creeping thing happens to me from time to time and clearing my environment in WMR windows settings clears it up. 1 I9-9900KS OC 5.2, Asus Maximus XI Hero, MSI RTX 4090 , EVGA 1200W P2 power supply, 2TB M.2 SSD, 64GB ram@3200mhz, Corsair H115i Pro AIO, Samsung Odyssey+, Reverb G2, Quest 3(new) Link to comment Share on other sites More sharing options...
Andrei Posted January 29, 2021 Author Share Posted January 29, 2021 7 hours ago, timcat said: The camera creeping thing happens to me from time to time and clearing my environment in WMR windows settings clears it up. Could you elaborate what do you mean by clearing environment in WMR windows? Thanks! AMD R7 5800X3D | Aorus B550 Pro | 32GB DDR4-3600 | RTX 4080 | VKB MGC Pro Gunfighter Mk III + Thustmaster TWCS + VKB T-Rudder Mk4 | HP Reverb G2 FC3 | A-10C II | Ка-50 | P-51 | UH-1 | Ми-8 | F-86F | МиГ-21 | FW-190 | МиГ-15 | Л-39 | Bf 109 | M-2000C | F-5 | Spitfire | AJS-37 | AV-8B | F/A-18C | Як-52 | F-14 | F-16 | Ми-24 | AH-64 NTTR | Normandy | Gulf | Syria | Supercarrier | Link to comment Share on other sites More sharing options...
timcat Posted January 29, 2021 Share Posted January 29, 2021 To remove all of this data, open Settings, navigate to "Mixed Reality", and select the Environment section of the left-hand side menu. Select the button labeled "Clear Environment Data" to remove all environment and tracking data. After you clear the data, the next time you use your headset WMR will ask you to look up, down, side to side in order to record your surroundings as you go into the cliffhouse. 2 I9-9900KS OC 5.2, Asus Maximus XI Hero, MSI RTX 4090 , EVGA 1200W P2 power supply, 2TB M.2 SSD, 64GB ram@3200mhz, Corsair H115i Pro AIO, Samsung Odyssey+, Reverb G2, Quest 3(new) Link to comment Share on other sites More sharing options...
iFoxRomeo Posted January 29, 2021 Share Posted January 29, 2021 This problem is there since at least the G1. When it happens I do the following and most of the time it helps: Cover all cameras (G1 2 Cameras, G2 4 Cameras) with your hands/fingers, so that the tracking stops. Then you still can look around, but your position is fixed. Keep the cameras covered. Now look around. 90deg to both sides. Look up and down at -90, -45, 0, +45, +90 deg. Repeat. Uncover the cameras and your position will switch. Now reset with the in game position reset. If that doens't help, restart PC. If that doesn't help clear environment like timcat said. Fox Spoiler PC Specs: Ryzen 9 5900X, 3080ti, 64GB RAM, Oculus Quest 3 Link to comment Share on other sites More sharing options...
Andrei Posted January 30, 2021 Author Share Posted January 30, 2021 Thank you guys for the advice! Will give it a try. AMD R7 5800X3D | Aorus B550 Pro | 32GB DDR4-3600 | RTX 4080 | VKB MGC Pro Gunfighter Mk III + Thustmaster TWCS + VKB T-Rudder Mk4 | HP Reverb G2 FC3 | A-10C II | Ка-50 | P-51 | UH-1 | Ми-8 | F-86F | МиГ-21 | FW-190 | МиГ-15 | Л-39 | Bf 109 | M-2000C | F-5 | Spitfire | AJS-37 | AV-8B | F/A-18C | Як-52 | F-14 | F-16 | Ми-24 | AH-64 NTTR | Normandy | Gulf | Syria | Supercarrier | Link to comment Share on other sites More sharing options...
Japo32 Posted February 11, 2021 Share Posted February 11, 2021 Thanks! I also has this issue, and the cleanding of enviroment seems to do something. Hope that last... and hope that HP gives us an drivers update to solve this issue, because it is awful and imposible to use the VR in those conditions. Link to comment Share on other sites More sharing options...
Midair Posted September 29, 2021 Share Posted September 29, 2021 Hi guys, I just did it and I loose the vertical and lateral axes could you tell me how to restore them? Link to comment Share on other sites More sharing options...
rss0900 Posted October 23, 2021 Share Posted October 23, 2021 Are you guys playing at night? I had this issue until I turned on a light in the room then 100% better, appears it does not work in the dark Link to comment Share on other sites More sharing options...
Recommended Posts