Oculus Quest2 Bugs...

[RamenWater]

My computer specification is 5600x RAM 16gb 3070.
The play starts well without any problems. It's very smooth when you run F16 viper in Multi server.
The graphics card usage rate is 60 to 70%, and the RAM usage is about 80%.

The problem is when the use of graphics cards increases momentarily...
In this case, the graphics card usage is usually increased, and then it has to be maintained at 60 to 70%.
In my case, graphics card keep using 100% and I get frame degradation and continuous screen disconnection.
Even on the main menu screen, the graphics usage is almost fixed at 100%. Frame degradation and screen disconnection also occur.
So if i shut down and restart the DCS, it will play normally. And then frame's down, screen's down starts again...

The parts I can't get the hang of are as below.
1) If the graphics option is high in the first place, there should be frame degradation and screen disconnection from the start, but it is not.
2) Maintaining 100% usage even on a screen with low graphics card computation.
3) There was no such phenomenon until a few days ago, but the recent occurrence of this anomaly.

 

I don't even know what the problem is because of the three parts above...
If anyone has experienced or solved this phenomenon, please help me 
I miss normal play. 

[Max Thunder]

Since I play VR in DCS with my Quest 1 (1070ti) and Quest 2 (3070) I am facing the same problem.   

 

What sometimes helps is to switch out of the DCS Window (Alt-Tab) to the Oculus App (or a different App) and wait for a view seconds. 
 

But I didn’t found a solution for the Problem. ...