tmansteve Posted April 19, 2021 Share Posted April 19, 2021 Thought I would try the Auto Carrier Landing to see how it feels. Set it up, then decided to land her normally. After connecting to the CAT for takeoff, I noticed the Landing Check light still on. I also had to use RShift + U to get the CAT to operate. While in the air, I couldn't use Altitude Autopilot. Is there a way to reset it so I can get AP/Ref back or is this a bug? Landed at airfield and still Landing Check light stayed on. Link to comment Share on other sites More sharing options...
Nobody Special Posted April 19, 2021 Share Posted April 19, 2021 (edited) Possibly related - I've mapped my brake lever to both brakes, and (with only a small pull) to toggle the autopilot-on switch. After landing (and braking, which switches AP on while on the ground), I have to use the mouse to reset the autopilot-on switch before the keybinding or brake-lever toggle will work again. Maybe you can try using the mouse to toggle the switches and see if that works? Edited April 19, 2021 by Nobody Special Link to comment Share on other sites More sharing options...
tmansteve Posted April 19, 2021 Author Share Posted April 19, 2021 Well, I can have a go but not sure why I have to do it like that. I hope if it is a small bug, it gets sorted sometime in the future. Cheers Link to comment Share on other sites More sharing options...
draconus Posted April 19, 2021 Share Posted April 19, 2021 http://www.heatblur.se/F-14Manual/cockpit.html#vertical-display-indicator-vdi Landing Chk is just advisory light that tells you that carrier is ready for ACL and you should prepare for landing. Default Lshift+U launches you from the cat - that's all fine. To use Alt Hold AP turn AP off. Set AP mode to AltHold. Make sure all SAS are On. Keep straight and level, turn AP On then NWS/AP button. Win10 i7-10700KF 32GB RTX3060 Rift S T16000M TWCS TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria Link to comment Share on other sites More sharing options...
tmansteve Posted April 20, 2021 Author Share Posted April 20, 2021 Thanks draconus, will give that a go. Link to comment Share on other sites More sharing options...
Recommended Posts