Pello86 Posted April 26, 2021 Share Posted April 26, 2021 Hi guys; having a issue how to start up, i start the engine and let it run up to 92RPM, before I just used to move my throttle from the idle position for the engine to kick in. I am flying the sky warrior campaign on mission 3 (cold start) and when I try to move my throttle nothing happens??? I have tried to click the throttle control lever with the mouse too and still nothing ? Do you guys have any ideas ? Thanks Rig: |(CPU)Intel® Core™ i7 Eight Core Processor i7-9700K (3.6GHz) 12MB Cache|ASUS® ROG STRIX Z390-F GAMING|32GB Corsair VENGEANCE RGB PRO DDR4 3200MHz (2 x 16GB)|11GB NVIDIA GEFORCE RTX 2080TI|2TB SEAGATE IRONWOLF PRO 3.5", 7200 RPM 128MB CACHE|1TB INTEL® 660p M.2 NVMe PCIe SSD (upto 1800MB/sR | 1800MB/sW)|CORSAIR 850W RMx SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET|Processor Cooling Corsair H60 Hydro Cooler w/ PCS Ultra Quiet Fans Thermal Paste||RIFT S VR| TM HOTAS A10 Warthog :joystick: Link to comment Share on other sites More sharing options...
glen.a.williamson Posted April 26, 2021 Share Posted April 26, 2021 Could your parking brake still be on ? Link to comment Share on other sites More sharing options...
Pello86 Posted April 26, 2021 Author Share Posted April 26, 2021 Tried to release the parking brake and the throttle does move Fwd and aft but the engine does not run up past 92 RPM. Just done a cold start in a free flight to test and had no issues at all, engine ran up past 92RPM. Could potentially be a bug on the campaign ? Rig: |(CPU)Intel® Core™ i7 Eight Core Processor i7-9700K (3.6GHz) 12MB Cache|ASUS® ROG STRIX Z390-F GAMING|32GB Corsair VENGEANCE RGB PRO DDR4 3200MHz (2 x 16GB)|11GB NVIDIA GEFORCE RTX 2080TI|2TB SEAGATE IRONWOLF PRO 3.5", 7200 RPM 128MB CACHE|1TB INTEL® 660p M.2 NVMe PCIe SSD (upto 1800MB/sR | 1800MB/sW)|CORSAIR 850W RMx SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET|Processor Cooling Corsair H60 Hydro Cooler w/ PCS Ultra Quiet Fans Thermal Paste||RIFT S VR| TM HOTAS A10 Warthog :joystick: Link to comment Share on other sites More sharing options...
Wisky Posted April 27, 2021 Share Posted April 27, 2021 i dont believe a campaign can be bugged in not letting you cold start the jet. maybe you just forgot to activate the fuel shutoff lever or the jet was on 0lbs of fuel? Link to comment Share on other sites More sharing options...
Bog9y Posted April 27, 2021 Share Posted April 27, 2021 Chocks still in place? Link to comment Share on other sites More sharing options...
Chaders Posted May 3, 2021 Share Posted May 3, 2021 Have you checked your engine RPM switch is set to LOW? Best Regards, Chaders. Link to comment Share on other sites More sharing options...
Recommended Posts