huchanronaa Posted June 29, 2021 Share Posted June 29, 2021 (edited) Because the manual is not easy to understand, how do you do it? Edited June 29, 2021 by huchanronaa Link to comment Share on other sites More sharing options...
Rhinozherous Posted June 29, 2021 Share Posted June 29, 2021 (edited) If you ask about petrovich ai, you have to change the seat to the forward position - default binding is number 2 on your keyboard. But as this is part of the manual you have to read that again, or watch Youtube videos, or read thru the forum. This is too big to explain it here in this post. If you ask about the "autopilot" this could be a missunderstanding, because there is no autopilot as in an airplane where you push a button and the aircraft follows. It is more a stabilization System which lends you a hand in holding pitch, bank, yaw and altitude when you push the trim button. But the most important thing is trying it again and again and read again and again until you understand it. If you have questions, ask here in the forum - but be more precise in which things you want to know! Edited June 29, 2021 by Rhinozherous i7-14700KF 5.6GHz Water Cooled /// ZOTAC RTX 4070 TI Super 16GB /// 32GB RAM DDR5 /// Win11 /// SSDs only DCS - XP12 - MSFS2020 Link to comment Share on other sites More sharing options...
Revs Posted June 29, 2021 Share Posted June 29, 2021 there is also a route mode to the right of auto hover that will go to the azimuth you set on the dial just above the auto hover, you must be at a fairly stable flight for it to engage and sometimes stays lit but stops working when ever pitched or too fast Ryzen 1700 @ 3.8GHz / 32GB( 4x8 ) @ 3.2GHz / 1TB ADATA NVMe System Drive / 232GB NVMe Samsung 960 / ASUS dual RTX 2080ti / Reverb / Rift CV1 / T-16000M FCS flight pack A10C/M2000C/F5E/SA342/Mi8/UH1H/KA50/AJS-37/FA-18C/AV-8B/F-14/Mig29/CA/SU-27 Link to comment Share on other sites More sharing options...
Recommended Posts