Jump to content

May ED/DCS share a preview of TEDAC controls in pdf format similar to what was shared for the Cyclic/Collective?


hannibal

Recommended Posts

The grips on TEDAC,  how do they actuate? I suppose they pitch up and down controlling gun elevation. But how is the gun rotated? Does the entire TEDAC unit rotate like american armor turret controller ( steering wheel like)? Or does it yaw like turret control in russian tanks? How much does it deflect?

Anton.

 

My pit build thread .

Simple and cheap UFC project

Link to comment
Share on other sites

2 hours ago, agrasyuk said:

The grips on TEDAC,  how do they actuate? I suppose they pitch up and down controlling gun elevation. But how is the gun rotated? Does the entire TEDAC unit rotate like american armor turret controller ( steering wheel like)? Or does it yaw like turret control in russian tanks? How much does it deflect?

The grips are fixed, they don't actuate the tads, the thumb force controller (kind of like a joystick on the right TEDAC handle) is how you drive (move) the tads (or selected sight minus the HMD).  The grips can rotate but it's designed to rotate to a position that the CPG is comfortable to hold his hands then it's fixed, think like adjusting a car seat.  Not for controlling anything. 

Gun can also be controlled by either seat with the helmet, you will have HMD as your sight source, in which it will follow the path of your head up until it's limits. 

 


Edited by kgillers3
  • Thanks 1
Link to comment
Share on other sites

20 hours ago, hannibal said:

Panel came in...more work resuming..starting some wiring..it will not be pretty..

Screenshot_20211018-173035_Gallery.jpg

Reflection.. 

Screenshot_20211018-173416_Gallery.jpg

Hey Hannibal, I just started designing the MFD for the TEDAC, and found this topic. Would you be willing to share your designs when finished? I'm going to be going the basic way with wiring all the buttons to a button controller that I have that controls up to 256 buttons (MFD and handles hopefully). Also, which monitor did you go with? I didn't see you post it.

A-10C - FC3 - CA - L-39 - UH1 - P-51 - Hawk - BS2 - F-86 - Gazelle - F-5E - AV8B - F/A-18C

i5-4590 - GTX 1060 - Oculus CV1 - TM:Warthog

[sIGPIC]http://forums.eagle.ru/signaturepics/sigpic9979_1.gif[/sIGPIC]

Link to comment
Share on other sites

56 minutes ago, hog_driver111th said:

Hey Hannibal, I just started designing the MFD for the TEDAC, and found this topic. Would you be willing to share your designs when finished? I'm going to be going the basic way with wiring all the buttons to a button controller that I have that controls up to 256 buttons (MFD and handles hopefully). Also, which monitor did you go with? I didn't see you post it.

it was in the youtube video of the guy i am following

CLAA070MA0ACW is the model number

find me on steam! username: Hannibal_A101A

http://steamcommunity.com/profiles/76561197969447179

Link to comment
Share on other sites

6 minutes ago, hannibal said:

it was in the youtube video of the guy i am following

CLAA070MA0ACW is the model number

Thanks. I also just spoke to my friend who has a huge 5-axis CNC at work. If I can make up the design in such a way that it's a desktop unit (like the honeycomb alpha yoke), he might be able to make it for me. Once I get a basic design done and tested, I'll let you know.

  • Like 1

A-10C - FC3 - CA - L-39 - UH1 - P-51 - Hawk - BS2 - F-86 - Gazelle - F-5E - AV8B - F/A-18C

i5-4590 - GTX 1060 - Oculus CV1 - TM:Warthog

[sIGPIC]http://forums.eagle.ru/signaturepics/sigpic9979_1.gif[/sIGPIC]

Link to comment
Share on other sites

10 minutes ago, Apar said:

Is that possible for USB input instead of hmdi/vga?

anything is possible.

https://www.amazon.com/Lilliput-7-inch-Monitor-UM-70-Non-Touchscreen/dp/B000AYHY7I

of course. i am not using the usb panel. i specifically picked hdmi. 

as mentioned i went for what ppl already have done, which they used the CLAA070MA0ACW

find me on steam! username: Hannibal_A101A

http://steamcommunity.com/profiles/76561197969447179

Link to comment
Share on other sites

everyone is sharing what the controls should be from the actual aircraft.. but i would like to know what is actually implement in game..

can someone at ED please share control layout for tedac?

@NineLine @PilotMi8


Edited by hannibal
  • Like 2

find me on steam! username: Hannibal_A101A

http://steamcommunity.com/profiles/76561197969447179

Link to comment
Share on other sites

6 hours ago, stormridersp said:

What joystick is that? That'd be a perfect match for a game like Steel Beasts!

its a joystick i made specifically for the Mi24... the 9M113 aiming station if you will..

never played steel beast.. but the my controller also works well as the controller for the minigun on the huey..


Edited by hannibal

find me on steam! username: Hannibal_A101A

http://steamcommunity.com/profiles/76561197969447179

Link to comment
Share on other sites

Those that wana complain that vkb and virpil joysticks are expensive.. only if they knew what it takes to build a controller. The prices they offer are a steal considering the time for research, development, and labor..

Anywho..

 I have to make 4 more of these diode matrix modules😒😒

Screenshot_20211023-085330_Gallery.jpg

find me on steam! username: Hannibal_A101A

http://steamcommunity.com/profiles/76561197969447179

Link to comment
Share on other sites

Wow, this is a real top notch work! 👍👍👍 😍

I hope I can get it only nearly as good when I'm starting to built mine.

CockpitPC1: R9 5950X|64GB DDR4|512GB M2SSD|2TB M2SSD|RTX3090|ReverbG2|Win11Pro - PC2: PhnIIX6 1100T|32GB DDR2|2x2TB HDD|2x GTX660 SLI|Win7Pro64
ComUnitPC1: R9 3900XT|32GB DDR4|2x2TB HDD|RTX2070|Win11Pro - PC2: PhnIIX6 1100T|16GB DDR2|2x2TB HDD|GTX660|Win7Pro64
ComUnitPC3: AthlnIIX2 250|2GB DDR2|2TB HDD|5950Ultra|2xVoodooII SLI|WinXPPro32&WinME - PC4: K6-2+|768MB SDR|640GB HDD|Geforce256DDR|VoodooI|Win98SE

DCS - Modules - 1.jpg

DCS - Modules - 2.jpg

Link to comment
Share on other sites

5 hours ago, Viper1970 said:

Wow, this is a real top notch work! 👍👍👍 😍

I hope I can get it only nearly as good when I'm starting to built mine.

I just have to figure out the multimonitor situation. 

I currently updating my motion rig to Servo motor..have to find time to mess with the Lua file for multimonitor.

And find time to setup thingaverse to share files for this mfd build


Edited by hannibal

find me on steam! username: Hannibal_A101A

http://steamcommunity.com/profiles/76561197969447179

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...