DelRoy Posted January 22, 2022 Share Posted January 22, 2022 Hi, For some reason the NWS on the 2000C stopped working. I have checked and double checked the bindings, I have rebinded the keys to the keyboard, I have repaired DCS (Currently at 2.7.91.8080). The NWS is bound to the same hardware in the FC3 Eagle and the JF-17 both seem to be working fine. I am one step away from deleting the module and reinstalling it to see if that helps, but I'd rather not do that. Any thoughts? Link to comment Share on other sites More sharing options...
Kercheiz Posted January 24, 2022 Share Posted January 24, 2022 Hi, Thank you for the report. Could you send a short track file (hot or cold start) showing the issue? Link to comment Share on other sites More sharing options...
DelRoy Posted January 25, 2022 Author Share Posted January 25, 2022 Thank you for your reply. This is a short track. I hot started on the runway. Applied power until the aircraft started rolling. I then switched on nws and rotated the rudder left and right. I confirmed the blue light was on, and toggled it off. I rotated the rudder s again. I then repeated the exercise and quit saving the track. nwstestM2000C.trk Link to comment Share on other sites More sharing options...
DelRoy Posted January 30, 2022 Author Share Posted January 30, 2022 Did a full slow repair and checked to remove extra files. Now working. Link to comment Share on other sites More sharing options...
myHelljumper Posted August 10, 2022 Share Posted August 10, 2022 Hi, The NWS is working as intended, moving this to resolved. Thanks. Helljumper - M2000C Guru Helljumper's Youtube https://www.youtube.com/channel/UCK3rTjezLUxPbWHvJJ3W2fA Link to comment Share on other sites More sharing options...
Recommended Posts