ospermor Posted May 28, 2022 Share Posted May 28, 2022 En 25/5/2022 a las 23:15, Peaches dijo: En 25/5/2022 a las 0:47, Bunny Clark dijo: That will depend how you have your other modules set up. Right now, anything that exports to the LEFT_MPCD and RIGHT_MPCD viewports will blow up the Apache. If you do not have these viewports in your monitor config and use unique names for every other DCS module viewport, then the Apache and other modules can coexist. Thanks, Bunny. I was afraid of that response. I don't want to go through and set up new export names for all the other modules, nor am I particularly happy to have to switch monitor setup lua files and restart DCS each time I swap to the Apache. Guess I'm waiting and hoping! It is easier to change the name of the MFD of the apache pilot, than the rest of the modules, and regarding restarting every time you change to apache, the only thing you have to do in the system options is to change the monitor option without the need of exit the simulator. I have several multi-monitor configurations and I choose the one that suits me. 1 Link to comment Share on other sites More sharing options...
Smashy Posted May 28, 2022 Share Posted May 28, 2022 12 hours ago, ospermor said: It is easier to change the name of the MFD of the apache pilot, than the rest of the modules, and regarding restarting every time you change to apache, the only thing you have to do in the system options is to change the monitor option without the need of exit the simulator. I have several multi-monitor configurations and I choose the one that suits me. Whenever I change monitor options, DCS restarts itself. It's pretty painful to make the switch. The only thing different between my usual monitor config and the Apache is the viewport names: $ diff CUSTOM\ -\ AH-64D\ PLT\ MFDs.lua CUSTOM\ -\ default\ MFDs.lua 2c2 < name = _('CUSTOM - AH64D PLT MFDs'); --- > name = _('CUSTOM - default MFDs'); 18c18 < AH64D_PLT_LEFT_MFCD = --- > LEFT_MFCD = 26c26 < AH64D_PLT_RIGHT_MFCD = --- > RIGHT_MFCD = Link to comment Share on other sites More sharing options...
JIGGAwest Posted May 31, 2022 Share Posted May 31, 2022 On 5/28/2022 at 3:27 AM, ospermor said: It is easier to change the name of the MFD of the apache pilot, than the rest of the modules, and regarding restarting every time you change to apache, the only thing you have to do in the system options is to change the monitor option without the need of exit the simulator. I have several multi-monitor configurations and I choose the one that suits me. Wait, you can change your monitor config file without restarting? How exactly do you do this? Link to comment Share on other sites More sharing options...
ospermor Posted June 1, 2022 Share Posted June 1, 2022 hace 19 horas, JIGGAwest dijo: Wait, you can change your monitor config file without restarting? How exactly do you do this? Well, before it didn't restart, I think it was because the two configurations were exactly the same, but I see that now it restarts after changing the names of the MFDs. I don't know what the reason is 1 Link to comment Share on other sites More sharing options...
Norsk-L Posted July 12, 2022 Share Posted July 12, 2022 On 4/1/2022 at 9:43 AM, TAIPAN_ said: Switch it to night mode. Hi, I cant still get the pilot screens to come up just the CPG, no matter what I do. Even changed my entire airplanes so each screen on every plane has its own special name and does not share the same ID for monitor setup. GHOSTING or double vision, if you reduce the brightness located on the right side of the TEDAC it will solve your issue. Link to comment Share on other sites More sharing options...
JIGGAwest Posted July 12, 2022 Share Posted July 12, 2022 (edited) 1 hour ago, Norsk-L said: Hi, I cant still get the pilot screens to come up just the CPG, no matter what I do. Even changed my entire airplanes so each screen on every plane has its own special name and does not share the same ID for monitor setup. GHOSTING or double vision, if you reduce the brightness located on the right side of the TEDAC it will solve your issue. Make sure you have unique names for the CPG and the PILOT MFD. You'll need to comment out the CPG MFD names in the monitor config in order to get it to work. for example: PILOT_RIGHT_MFCD = { x = 5225; y = 1080; width = 535; height = 535; } AH64_PILOT_RIGHT = { x = 5225; y = 1080; width = 535; height = 535; } --AH64_CPG_RIGHT = --{ -- x = 5225; -- y = 1080; -- width = 535; -- height = 535; --} Edited July 12, 2022 by JIGGAwest Link to comment Share on other sites More sharing options...
Norsk-L Posted July 12, 2022 Share Posted July 12, 2022 6 hours ago, JIGGAwest said: Make sure you have unique names for the CPG and the PILOT MFD. You'll need to comment out the CPG MFD names in the monitor config in order to get it to work. for example: PILOT_RIGHT_MFCD = { x = 5225; y = 1080; width = 535; height = 535; } AH64_PILOT_RIGHT = { x = 5225; y = 1080; width = 535; height = 535; } --AH64_CPG_RIGHT = --{ -- x = 5225; -- y = 1080; -- width = 535; -- height = 535; --} Hi, Thank you very much, it worked but only now I see the pilot MPDs when I switch to the CPG it is still the pilot, any idea why? Also any idea how to distinguish between KU for Pilot and CPG? --AH64_CPG_LEFT_MFCD = --{ --x = 9806; --y = 354; --width = 1507; --height = 1087; --} --AH64_CPG_RIGHT_MFCD = --{ --x = 11729; --y = 355; --width = 1495; --height = 1087; --} AH64_PLT_LEFT_MFCD = { x = 9806; y = 354; width = 1507; height = 1087; } AH64_PLT_RIGHT_MFCD = { x = 11729; y = 355; width = 1495; height = 1087; } Link to comment Share on other sites More sharing options...
JIGGAwest Posted July 12, 2022 Share Posted July 12, 2022 8 hours ago, Norsk-L said: Hi, Thank you very much, it worked but only now I see the pilot MPDs when I switch to the CPG it is still the pilot, any idea why? Also any idea how to distinguish between KU for Pilot and CPG? --AH64_CPG_LEFT_MFCD = --{ --x = 9806; --y = 354; --width = 1507; --height = 1087; --} --AH64_CPG_RIGHT_MFCD = --{ --x = 11729; --y = 355; --width = 1495; --height = 1087; --} AH64_PLT_LEFT_MFCD = { x = 9806; y = 354; width = 1507; height = 1087; } AH64_PLT_RIGHT_MFCD = { x = 11729; y = 355; width = 1495; height = 1087; } It's been reported. I believe there is a double rendering happening with the exports. Which is the reason you can see the exports still after the aircraft has shut completely down. There hasn't been comment by ED to fix this or that it is being worked on. Due to this issue, it's best to have separate monitor config files for the CPG and the Pilot. To fly the CPG you need to "un" comment out the CPG_MFD. You'll not be able to switch dynamically between front and back with working MFD exports at this point. 1 Link to comment Share on other sites More sharing options...
PhoenixBondi Posted July 17, 2022 Share Posted July 17, 2022 On 5/24/2022 at 1:15 PM, ospermor said: In order to view the pilot's MFDs alone, I have made the following changes to various files and a dual monitor setup I was already using for the F18. 1º- Change the name of the MFD in the file MFD_plt_right_init, by RIGHT_MFCD_PLT 2º- Change the name of the MFD in the file MFD_plt_left_init, by LEFT_MFCD_PLT These files are located in the path Eagle Dynamics\DCS World\Mods\aircraft\AH-64D\Cockpit\Scripts\Displays\MFD\indicator This is my apache file i made (ignore the f14 info its there so i can test if it dosn't work on the ah-64 i can test to see if its compleyely broke or not Hi sorry to jump onto this thread but been trying to deal with it my self to NO luck no you say "change the name of the MFD in the file MFD_plt_right_init or do you mean just rename the file? i have tried this and i just got blank mfd's in game and on my mfd's _ = function(p) return p; end; name = _('Apache Main'); Description = 'Left MFCD on the left monitor,Right MFCD on the right and camera on the center' Viewports = { Center = { x = 0; y = 0; width = screen.width; height = screen.height /1.416; viewDx = 0; viewDy = 0; aspect = screen.width / (screen.height / 1.416); } } F14_VDI= { x = 105; y = screen.height / 1.409; width = 615; height = 615; } F14_HSD = { x = 898; y = screen.height / 1.409; width = 600; height = 600; } --LEFT LEFT_MFCD_PLT = { x = 105; y = 1.409; width = 600; height = 600; } --RIGHT RIGHT_MFCD_PLT = { x = 898; y = 1.409; width = 600; height = 600; } UIMainView = Viewports.Center GU_MAIN_VIEWPORT = Viewports.Center Thanks in advance - i hope / look forward to your reply Link to comment Share on other sites More sharing options...
Bunny Clark Posted July 17, 2022 Share Posted July 17, 2022 6 hours ago, PhoenixBondi said: Hi sorry to jump onto this thread but been trying to deal with it my self to NO luck no you say "change the name of the MFD in the file MFD_plt_right_init or do you mean just rename the file? i have tried this and i just got blank mfd's in game and on my mfd's Have you read through my guide here: That will hopefully give you a baseline understanding of what needs to be done. 1 Oil In The Water Hornet Campaign. Bunny's: Form-Fillable Controller Layout PDFs | HOTAS Kneeboards | Checklist Kneeboards Link to comment Share on other sites More sharing options...
PhoenixBondi Posted July 17, 2022 Share Posted July 17, 2022 i had not, i will go and have a look through it now 1 Link to comment Share on other sites More sharing options...
Norsk-L Posted July 26, 2022 Share Posted July 26, 2022 Hi, I ran into a problem with helios. The response time is very slow, to test it I used f18 IFEI, and it's not updating the page as the same speed if I mode the game file and use my own monitor configuration. Am I doing something wrong? Link to comment Share on other sites More sharing options...
JIGGAwest Posted July 27, 2022 Share Posted July 27, 2022 16 hours ago, Norsk-L said: Hi, I ran into a problem with helios. The response time is very slow, to test it I used f18 IFEI, and it's not updating the page as the same speed if I mode the game file and use my own monitor configuration. Am I doing something wrong? You should start a new thread. Or possibly try to get help in the Helios discord. This thread is covering MFD exports with the DCS monitor.lua. 1 Link to comment Share on other sites More sharing options...
shagrat Posted July 27, 2022 Share Posted July 27, 2022 Am 18.3.2022 um 17:09 schrieb Hobel: All Setting 1.lua Monitor Config Do not forget to specify your parrameters. MPD_LCD_Cpg_Left.lua 235 B · 93 Downloads MPD_LCD_Plt_Right.lua 236 B · 58 Downloads MPD_LCD_Plt_Left.lua 235 B · 62 Downloads MPD_LCD_Cpg_Right.lua 238 B · 50 Downloads put this in : DCS World OpenBeta\Mods\aircraft\AH-64D\Cockpit\Scripts\Displays\MFD\indicator\LCD MFD_cpg_right_init.lua 725 B · 62 Downloads MFD_cpg_left_init.lua 721 B · 54 Downloads MFD_plt_left_init.lua 720 B · 60 Downloads MFD_plt_right_init.lua 724 B · 50 Downloads an this in : D:\DCS World OpenBeta\Mods\aircraft\AH-64D\Cockpit\Scripts\Displays\MFD\indicator example i can put all 4 MFDs where i want them And the most important it does not come into conflict with other modules and it passes the IC now I look if it is possible that when you change the seat also only these screens are displayed And that is what is wanted here, or? Well, what we actually need is a solution, that is integrated into the module and not a community hack, to provide a consistent and permanent setup. As long as people need to mess with files inside the DCS core folders, this is a workaround, not the solution. I am not dismissing your hard work and effort you put into this, but in my opinion we need at least the separate MFD and TEDAC definitions by ED, as part of the module, so it works in the monitor config setup in the User directory. For example, for troubleshooting and finding bugs, reporting issues, I need an unmodified DCS core install, with the modules unaltered... I really hope ED integrates your fixes into the official release cycle, somehow. 1 Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore) Link to comment Share on other sites More sharing options...
Hobel Posted July 28, 2022 Share Posted July 28, 2022 vor 7 Stunden schrieb shagrat: Well, what we actually need is a solution, that is integrated into the module and not a community hack, to provide a consistent and permanent setup. As long as people need to mess with files inside the DCS core folders, this is a workaround, not the solution. I am not dismissing your hard work and effort you put into this, but in my opinion we need at least the separate MFD and TEDAC definitions by ED, as part of the module, so it works in the monitor config setup in the User directory. For example, for troubleshooting and finding bugs, reporting issues, I need an unmodified DCS core install, with the modules unaltered... I really hope ED integrates your fixes into the official release cycle, somehow. I completely agree, but that's what we currently have. In another topic I also mention that the option I initially had in search is unfortunately hardcoded. https://forum.dcs.world/topic/302585-possible-solution-to-display-all-apache-mfds/#comment-5007351 Link to comment Share on other sites More sharing options...
shagrat Posted July 28, 2022 Share Posted July 28, 2022 vor 10 Stunden schrieb Hobel: I completely agree, but that's what we currently have. In another topic I also mention that the option I initially had in search is unfortunately hardcoded. https://forum.dcs.world/topic/302585-possible-solution-to-display-all-apache-mfds/#comment-5007351 It's fixed! Today's patch has the MFDs sorted. Both for PLT and CPG seats. Thanks for listening, ED. 1 Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore) Link to comment Share on other sites More sharing options...
Hobel Posted July 28, 2022 Share Posted July 28, 2022 vor 20 Minuten schrieb shagrat: It's fixed! Today's patch has the MFDs sorted. Both for PLT and CPG seats. Thanks for listening, ED. Oh wow nice, am excited to test this! Link to comment Share on other sites More sharing options...
Floyd1212 Posted July 28, 2022 Share Posted July 28, 2022 Thanks, ED!!! Link to comment Share on other sites More sharing options...
JIGGAwest Posted July 29, 2022 Share Posted July 29, 2022 has anyone got the TEDAC display to work after the update? using method: modify TEDAC_init.lua .....\Mods\aircraft\AH-64D\Cockpit\Scripts\Displays\TEDAC with the line at the end of the file try_find_assigned_viewport("CENTER_MFCD") Link to comment Share on other sites More sharing options...
Mapi Posted July 29, 2022 Share Posted July 29, 2022 TEDAC still double Link to comment Share on other sites More sharing options...
TAIPAN_ Posted August 9, 2022 Share Posted August 9, 2022 On 7/29/2022 at 11:55 AM, JIGGAwest said: has anyone got the TEDAC display to work after the update? using method: modify TEDAC_init.lua .....\Mods\aircraft\AH-64D\Cockpit\Scripts\Displays\TEDAC with the line at the end of the file try_find_assigned_viewport("CENTER_MFCD") Still works fine, you need two lines at the end not one: dofile(LockOn_Options.common_script_path.."ViewportHandling.lua") try_find_assigned_viewport("AH64_TEDAC") On 7/29/2022 at 3:51 AM, shagrat said: It's fixed! Today's patch has the MFDs sorted. Both for PLT and CPG seats. Thanks for listening, ED. This is actually working BETTER than I expected. I had thought maybe we could specify either one or the other and have to choose pilot or CPG... However ED changed it so that it AUTOMATICALLY switches exports when switching seats, sooo good. Now the home cockpit MFD screens are setup perfectly even if we don't have another crew member Pimax Crystal VR & Simpit User | Ryzen CPU & Nvidia RTX GPU | Some of my mods Link to comment Share on other sites More sharing options...
Marcos Paes Posted November 27, 2022 Share Posted November 27, 2022 nullHere i have the same ghost image, anyone knows how to fix? Link to comment Share on other sites More sharing options...
jonsky7 Posted November 27, 2022 Share Posted November 27, 2022 11 hours ago, Marcos Paes said: nullHere i have the same ghost image, anyone knows how to fix? You can switch it to night mode, top right knob, will get rid of ghosting and has little effect on display brightness. Link to comment Share on other sites More sharing options...
Floyd1212 Posted November 27, 2022 Share Posted November 27, 2022 ED has said this should be fixed in the next patch. Link to comment Share on other sites More sharing options...
Bunny Clark Posted December 3, 2022 Share Posted December 3, 2022 On 11/27/2022 at 9:40 AM, jonsky7 said: You can switch it to night mode, top right knob, will get rid of ghosting and has little effect on display brightness. Night mode does not get rid of the ghosting, it just makes the ghosted image dimmer and green. Oil In The Water Hornet Campaign. Bunny's: Form-Fillable Controller Layout PDFs | HOTAS Kneeboards | Checklist Kneeboards Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now