LivingSacrifice Posted December 14, 2008 Share Posted December 14, 2008 I'm trying to get my X52 throttle set up to pull to raise the collective and no matter what I do, the collective setting will not change from its default setting (which has me pushing to raise the collective). Setting the axis to inverted does nothing. Does anyone know of a specific bug with this joystick setup? Or a fix to force it to invert the z axis? Link to comment Share on other sites More sharing options...
scatter Posted December 14, 2008 Share Posted December 14, 2008 When you go into "axis tune" to invert the axis does it go up and down on the graph when you move the collective? In my system I found a lot of imaginary axes on multiple controllers (JS, Throttle, Rudders) assigned when I set up my controllers in Black Shark. You may have to search about for the correct device. If this is working then the only other thing I can think of is that there are separate settings for realistic and game modes and whichever you're flying needs to be set. (the invert axis works fine on my CH stick) [sIGPIC][/sIGPIC] Virtual Australian Air Force Link to comment Share on other sites More sharing options...
LivingSacrifice Posted December 14, 2008 Author Share Posted December 14, 2008 Yep, the indicators move when I'm in the axis tune screen. But, no, I didn't realize there are different settings for realistic and game... I'll check that out, because I believe I was just flying around in "game" mode. Link to comment Share on other sites More sharing options...
Chillspider Posted December 17, 2008 Share Posted December 17, 2008 Im have somewhat same prob on my x52 my slider works as collective and i cant chage it i cant access the axis tune only FF which i do not have . And when i click the collective increase and select the empty box under x52 and click add it doesnt recognize my throttle moving also the axis box is still unavailable. Dell XPS 630i w/ Dell nForce 650i Sli ,Intel Q9650 @3.0 ,6.0 GB Ram @800Mhz, 2xGeforce 9800 GT 512 MB ,Saitek X52, Saitek Pro Rudder Pedals ,Dell 24" 1080P HD monitor, Klipsch THX Pro Media 2.1 ,TrackIR 4, Logitech MX518 [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Acedy Posted December 17, 2008 Share Posted December 17, 2008 @Chillspider: Sounds like you are trying to assign your throttle to the "Collective up/down" commands on the "INS Collective Stick" page, which is wrong. You have to assing it to the "Flight Control Collective" axis that you can find on the "Axis Commands" page (red marked line in the drop down menu). [sIGPIC][/sIGPIC] *** SERVMAN SERVER MANAGEMENT MOD V2 FOR DCS:BS V1.0.1 *** *** VERSION FOR FC2 *** Link to comment Share on other sites More sharing options...
Chillspider Posted December 17, 2008 Share Posted December 17, 2008 thanks man dunno how i missed that . This sim is awesome i get constant 20-25 fps which is fine and everything works fine and no crashes or anything was well worth buying. I will be buying the box set too when it comes out you guys did a hell of a job. Dell XPS 630i w/ Dell nForce 650i Sli ,Intel Q9650 @3.0 ,6.0 GB Ram @800Mhz, 2xGeforce 9800 GT 512 MB ,Saitek X52, Saitek Pro Rudder Pedals ,Dell 24" 1080P HD monitor, Klipsch THX Pro Media 2.1 ,TrackIR 4, Logitech MX518 [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Pluto Posted February 23, 2019 Share Posted February 23, 2019 @Chillspider: Sounds like you are trying to assign your throttle to the "Collective up/down" commands on the "INS Collective Stick" page, which is wrong. You have to assing it to the "Flight Control Collective" axis that you can find on the "Axis Commands" page (red marked line in the drop down menu). Can you please paste a screenshot? I have the same issue and cannot work it out. Thanks! Link to comment Share on other sites More sharing options...
Ramsay Posted February 23, 2019 Share Posted February 23, 2019 Can you please paste a screenshot? I have the same issue and cannot work it out. This is my setup ... i9 9900K @4.7GHz, 64GB DDR4, RTX4070 12GB, 1+2TB NVMe, 6+4TB HD, 4+1TB SSD, Winwing Orion 2 F-15EX Throttle + F-16EX Stick, TPR Pedals, TIR5, Win 10 Pro x64, 1920X1080 Link to comment Share on other sites More sharing options...
Pluto Posted February 25, 2019 Share Posted February 25, 2019 This is my setup ... Well, does not work for me. There is even no difference between invert enabled or disabled. Lok at the attached thumbnails. I do not have the "Flight Control Collective" position. I am doing something wrong? Link to comment Share on other sites More sharing options...
Ramsay Posted February 25, 2019 Share Posted February 25, 2019 I do not have the "Flight Control Collective" position. I am doing something wrong? Each aircraft has it's own control setup. If you look at the top left of you screen shot, you'll see you have • Su-25T > Axis Commands selected. So you are adjusting how your X52 throttle controls the Su-25T's "Thrust". You'll need to select "Ka-50 Sim" in the first drop down list. i9 9900K @4.7GHz, 64GB DDR4, RTX4070 12GB, 1+2TB NVMe, 6+4TB HD, 4+1TB SSD, Winwing Orion 2 F-15EX Throttle + F-16EX Stick, TPR Pedals, TIR5, Win 10 Pro x64, 1920X1080 Link to comment Share on other sites More sharing options...
Pluto Posted February 25, 2019 Share Posted February 25, 2019 Each aircraft has it's own control setup. If you look at the top left of you screen shot, you'll see you have • Su-25T > Axis Commands selected. So you are adjusting how your X52 throttle controls the Su-25T's "Thrust". You'll need to select "Ka-50 Sim" in the first drop down list. Ramsay I do not have a black shark. I am trying to set axes for Su-25T's. I have only DCS world and flaming cliffs 3. Link to comment Share on other sites More sharing options...
Ramsay Posted February 25, 2019 Share Posted February 25, 2019 I am trying to set axes for Su-25T's. I was confused, as you didn't mention which aircraft and your post is in the Ka-50 'bugs and problems' section. No matter, this is my Su-25T setup, hope it's of use ... ... you'll note that 20% X52 throttle = 80% in the controls menu = 20% throttle in cockpit. If you check the 'invert' box, the cockpit throttle will be forward when your X52 throttle is back and vice versa (I'm not sure why you want to invert your throttle but it works). Tested DCS 2.5.4.27430 i9 9900K @4.7GHz, 64GB DDR4, RTX4070 12GB, 1+2TB NVMe, 6+4TB HD, 4+1TB SSD, Winwing Orion 2 F-15EX Throttle + F-16EX Stick, TPR Pedals, TIR5, Win 10 Pro x64, 1920X1080 Link to comment Share on other sites More sharing options...
Pluto Posted February 26, 2019 Share Posted February 26, 2019 Thank you Ramsey. I am a real greenhorn. Sorry for posting in Black Shark section but I was looking for in across the whole forum. The solution is trivial I simply was relied on indications from the controls menu not from the actual game. It happened by accident that when I tested the game, the axis was reversed and I did not get back to the game but tried to solve it from the menu. Sorry for bothering you but you really helped. Thank you. Link to comment Share on other sites More sharing options...
Recommended Posts