assafm25 Posted April 1, 2022 Share Posted April 1, 2022 How do i do it? [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
LooseSeal Posted April 1, 2022 Share Posted April 1, 2022 First of all - are you the pilot and using George in this scenario? Or are you the CPG? It's not really clear. - i7-7700k - 32GB DDR4 2400Mhz - GTX 1080 8GB - Installed on SSD - TM Warthog DCS Modules - A-10C; M-2000C; AV8B; F/A-18C; Ka-50; FC-3; UH-1H; F-5E; Mi-8; F-14; Persian Gulf; NTTR Link to comment Share on other sites More sharing options...
assafm25 Posted April 1, 2022 Author Share Posted April 1, 2022 Sorry u right. I asq on both cases [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
LooseSeal Posted April 1, 2022 Share Posted April 1, 2022 There isn't a "ground stabilise" in the Apache, as such, at least not yet. If you are the CPG and using the TADS to aim the gun, then you can use the LMC to somewhat stabilise the sight, while using the laser for correct ranging. If you are using the HMD to aim the gun, as either the CPG or pilot, then - either set the Man Range setting on the WPN page to auto (Box Man Range, then enter 'A' on the keyboard unit, then press enter - this will reset each time you select another weapon) or set the Man Range distance yourself. Auto is obviously more convenient, but works better on flatter ground. - i7-7700k - 32GB DDR4 2400Mhz - GTX 1080 8GB - Installed on SSD - TM Warthog DCS Modules - A-10C; M-2000C; AV8B; F/A-18C; Ka-50; FC-3; UH-1H; F-5E; Mi-8; F-14; Persian Gulf; NTTR Link to comment Share on other sites More sharing options...
assafm25 Posted April 1, 2022 Author Share Posted April 1, 2022 I tried to explain my "problem" I fly as CPG and select gun. Use TADs for make a target point and select it. Whan press the slave button my main screen slaved to the the point. But its never over the targets so i need to make some adjustments to it. But cant do it on the screen since the corser "dancing" [sIGPIC][/sIGPIC] IAF Bell205 IAF Anafa ----------------------- DCS World Modules: A-10C, FC3, MiG-21BiS, F-86, P-51, KA-50, UH-1H Huey, Mi-8, M2000K, Gazal, Bf109, Mig-15, Hawk and NTTR ----------------------- My System - ASUS Maximus HERO iiiv, CoolMaster 120 Sadion Plus, I7 -6700K @4.0, G.Skill ddr4 16GB ram, Gigabyte GTX 1070 G1 , PSU Seasonic X-650W, OCZ 150 500Gb ssd drive X2, Seagate 7200 1T X2. ------------- Link to comment Share on other sites More sharing options...
S. Low Posted April 1, 2022 Share Posted April 1, 2022 19 minutes ago, assafm25 said: I tried to explain my "problem" I fly as CPG and select gun. Use TADs for make a target point and select it. Whan press the slave button my main screen slaved to the the point. But its never over the targets so i need to make some adjustments to it. But cant do it on the screen since the corser "dancing" Move crosshair to your target and press LMC once and don’t touch joystick. It’ll stabilize the sight to that point. LMC moves with acceleration commands though so I’m not sure yet if you can adjust LMC and bring it back to zero movement, so the fix for that is deactivate LMC - adjust aim - reactivate LMC 2 Link to comment Share on other sites More sharing options...
Recommended Posts