fixed [FIXED] Ground Radar Issue

[Colmillo]

Hello everyone, this is the sequence of the problem:

1. Cold start
2. DTCs with waypoints created in ME 41, 42, 43, 44 and 45
3. After takeoff, direct flight to waypoint 42 and A/G mode active (to destroy some Nasams with LD-10)
4. LD-10 Aligned.

When taking the radar out of STBY mode, the navigation changes in the HSD to waypoint 43 (also indicating it in the HUD).
Returning to STBY mode returns the correct indication on the HSD.
It only happens once, but...

If I go back to NAV mode, to again select A/G mode; If I take the radar out of STBY mode again, this time the navigation changes to waypoint 41. And the process is similar, only this time it only goes back to 41.

Attached Log, Track and video.

Thanks

https://drive.google.com/file/d/1AppWIsF7oxQzZFxhNoYEdzQiHIxAFA6i/view?usp=sharing

https://youtu.be/eGzvEnlbr9k

 

Edited April 12, 2022 by uboats

[uboats]

please remove all mods first and check

[Napillo]

When you first activate the radar, it has some target that is just way out nowhere, you have to do 'unlock target' to get rid of it when you first turn on A/G radar. 

[uboats]

1 hour ago, Napillo said:

When you first activate the radar, it has some target that is just way out nowhere, you have to do 'unlock target' to get rid of it when you first turn on A/G radar. 

???

[Colmillo]

Sorry @uboAts, I forgot to clarify that I tried with and without MODs and the problem persists.

Anyway I will attach a video without mods.
And @Napillo is right, one way to get back to the NAV point is to do an unlock target, I hadn't tried that.
But the issue is why when leaving STBY mode, does it select a target (sometimes random) that coincides with programmed points?

 

Greetings!

 

https://youtu.be/0rtV3k5CRpI

[uboats]

4 hours ago, Colmillo said:

Sorry @uboAts, I forgot to clarify that I tried with and without MODs and the problem persists.

Anyway I will attach a video without mods.
And @Napillo is right, one way to get back to the NAV point is to do an unlock target, I hadn't tried that.
But the issue is why when leaving STBY mode, does it select a target (sometimes random) that coincides with programmed points?

 

Greetings!

 

https://youtu.be/0rtV3k5CRpI

Got it! Thanks

[uboats]

Could you provide a simple trk

we cannot reproduce it

[Colmillo]

13 hours ago, uboats said:

Could you provide a simple trk

we cannot reproduce it

In this case, when starting the flight in the air, the problem occurs once the RDR is set to STBY.
I hope it helps you

GND_RADAR_TEST.trk

Here is the miz.

GND_RADAR_TEST.miz

[uboats]

1 hour ago, Colmillo said:

In this case, when starting the flight in the air, the problem occurs once the RDR is set to STBY.
I hope it helps you

GND_RADAR_TEST.trk 38.96 kB · 1 download

Here is the miz.

GND_RADAR_TEST.miz 8.63 kB · 1 download

Thanks a lot