84-Simba Posted July 1, 2022 Share Posted July 1, 2022 Hi guys ! I tried the Mission 2 and I think the Guard Recieve option for the radios is not working. I missed the first distress call and been able to continue after I switch to the G channel. Is that a trigger problem or is the GRCV option not working in the Hornet ? Thx Link to comment Share on other sites More sharing options...
Fogo11 Posted July 1, 2022 Share Posted July 1, 2022 Make sure the frequency is correct, according to your kneeboard. The comm channels are not pre-planned Link to comment Share on other sites More sharing options...
84-Simba Posted July 1, 2022 Author Share Posted July 1, 2022 As I said, I wasn't receiving the chatter on the guard until I effectively switched to the G channel, which is already set to 243.00. But if I understand correctly the Hornet, I should be hearing the guard on any channel if the option GRCV is ticked. It is a common option in fighter jets to be able to monitor the guard at all time (but you can't respond until you actually switch to the guard) My question is : Is it a trigger related behaviour or is the GRCV not working in the Hornet ? Link to comment Share on other sites More sharing options...
AMEDooley Posted July 2, 2022 Share Posted July 2, 2022 It might be a Hornet thing but we just wouldn’t know until someone did something like this. 1 [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
84-Simba Posted July 2, 2022 Author Share Posted July 2, 2022 1 minute ago, AMEDooley said: It might be a Hornet thing but we just wouldn’t know until someone did something like this. That was my first impression but maybe it is related to how the trigger is working ... Link to comment Share on other sites More sharing options...
lester Posted July 2, 2022 Share Posted July 2, 2022 (edited) For me it was working: I just turned GRCV option on UFC for PRI radio on take-off and got distress call after departure. I didn't switch to G channel (as I didn't see notification to switch or maybe I missed it somehow) and stayed on the same frequency I was before on PRI (I don't recall if I stayed on TOWER or switched to DEPARTURE at this moment) and also was on STRIKE on AUX radio. But I had to reply to distress call via F10 menu option. Edited July 2, 2022 by lester 1 Все написанное выше является моим оценочным суждением Everything written above reflects my personal opinion Занимаюсь "активной пропагандой Американцев на данном форуме" © Flanker Link to comment Share on other sites More sharing options...
84-Simba Posted July 2, 2022 Author Share Posted July 2, 2022 Are you on Open Beta or Stable, and did you do the last update ? Link to comment Share on other sites More sharing options...
lester Posted July 2, 2022 Share Posted July 2, 2022 I'm on Open Beta 2.7.15.26783 1 Все написанное выше является моим оценочным суждением Everything written above reflects my personal opinion Занимаюсь "активной пропагандой Американцев на данном форуме" © Flanker Link to comment Share on other sites More sharing options...
84-Simba Posted July 2, 2022 Author Share Posted July 2, 2022 Strange. I'll try again then. Link to comment Share on other sites More sharing options...
FoxTwo Posted July 2, 2022 Share Posted July 2, 2022 (edited) I just completed the mission last night, with the right radio on channel 1 and GRCV enabled I was able to listen to guard without issues. Had to switch radio 1 to G to transmit though as expected. Edited July 2, 2022 by FoxTwo 1 Link to comment Share on other sites More sharing options...
84-Simba Posted July 2, 2022 Author Share Posted July 2, 2022 Allright. I may have messed up something then. I'll try again. Link to comment Share on other sites More sharing options...
lester Posted July 2, 2022 Share Posted July 2, 2022 6 hours ago, FoxTwo said: I just completed the mission last night, with the right radio on channel 1 and GRCV enabled I was able to listen to guard without issues. Had to switch radio 1 to G to transmit though as expected. May I ask whether you saw text notification to switch to G on PRI? Все написанное выше является моим оценочным суждением Everything written above reflects my personal opinion Занимаюсь "активной пропагандой Американцев на данном форуме" © Flanker Link to comment Share on other sites More sharing options...
84-Simba Posted July 2, 2022 Author Share Posted July 2, 2022 5 minutes ago, lester said: May I ask whether you saw text notification to switch to G on PRI? During the first minutes it tells you that you can switch to G or dial 243.00 on M. I switched naturally on G when I saw the text saying ''respond to the distress call'', even if I did not hear that first call. I'm almost sure GRCV was ticked on PRI since it is part of my Hornet startup routine for a while. That is why I asked if that option was implemented in the Hornet. Some seems to have the same problem as me, some don't. Link to comment Share on other sites More sharing options...
lester Posted July 2, 2022 Share Posted July 2, 2022 Quote During the first minutes it tells you that you can switch to G or dial 243.00 on M. Oh, I probably switched to 243.00 on PRI then. Quote I'm almost sure GRCV was ticked on PRI since it is part of my Hornet startup routine for a while. Maybe it's a trigger that didn't work for some reason... I think I was climbing to WP1 when I got distress call or even already climbed to the directed altitude 20k feet. 1 Все написанное выше является моим оценочным суждением Everything written above reflects my personal opinion Занимаюсь "активной пропагандой Американцев на данном форуме" © Flanker Link to comment Share on other sites More sharing options...
84-Simba Posted July 2, 2022 Author Share Posted July 2, 2022 13 minutes ago, lester said: Oh, I probably switched to 243.00 on PRI then. Maybe it's a trigger that didn't work for some reason... I think I was climbing to WP1 when I got distress call or even already climbed to the directed altitude 20k feet. Maybe ... I think I was climbing up to 20k but I can't remember if I had just turn on the vector given by the tower or already following Mother's TAC. Link to comment Share on other sites More sharing options...
Falken2 Posted July 3, 2022 Share Posted July 3, 2022 I think I used the preset channel on PRI. Worked fine. By the way, the mission is extremly boaring. Silly Claire ! How can I find you, if you can't use a GPS ? My radar won't catch your nutshell, only the big boats. So after scaning the big big sea with my own eyes for a very long time, I just got tired of this and ended it all. I'll skip the mission. Sorry Claire. Link to comment Share on other sites More sharing options...
84-Simba Posted July 3, 2022 Author Share Posted July 3, 2022 37 minutes ago, Falken2 said: I think I used the preset channel on PRI. Worked fine. By the way, the mission is extremly boaring. Silly Claire ! How can I find you, if you can't use a GPS ? My radar won't catch your nutshell, only the big boats. So after scaning the big big sea with my own eyes for a very long time, I just got tired of this and ended it all. I'll skip the mission. Sorry Claire. I found it interesting by being unusual. And I can confirm you can pick the boat on the radar and use the FLIR. But you have first to analyse the trajectory, calculate the time the boat traveled and assume a speed ; then take into account the drift under the storm. 1 Link to comment Share on other sites More sharing options...
Falken2 Posted July 3, 2022 Share Posted July 3, 2022 1 hour ago, 84-Simba said: I found it interesting by being unusual. And I can confirm you can pick the boat on the radar and use the FLIR. But you have first to analyse the trajectory, calculate the time the boat traveled and assume a speed ; then take into account the drift under the storm. Yes I remembered the BRC for carrier recovery was 211, so I thought the wind was blowing from that direction, right? So the boat must have been drifting north northeast. But of the hell can I estimate a distance? Link to comment Share on other sites More sharing options...
84-Simba Posted July 3, 2022 Author Share Posted July 3, 2022 29 minutes ago, Falken2 said: Yes I remembered the BRC for carrier recovery was 211, so I thought the wind was blowing from that direction, right? So the boat must have been drifting north northeast. But of the hell can I estimate a distance? SPOILER !!!! The boat is a yacht and said to be stranded so the wind is no factor. What I did is estimate an almost direct trajectory from the port of departure to Haïfa, assumed a speed of 20kts between 16h30 (hour of depart) and 20h (time Claire said the boat stopped). That way I determined a rough point and then search west from that point. I picked it up quite easily with the radar in SEA mode and the FLIR. I agree that from there you just turn around above the boat and enjoy the fantastic voicings but that is something very unusual in DCS 1 Link to comment Share on other sites More sharing options...
Falken2 Posted July 3, 2022 Share Posted July 3, 2022 1 hour ago, 84-Simba said: SPOILER !!!! The boat is a yacht and said to be stranded so the wind is no factor. What I did is estimate an almost direct trajectory from the port of departure to Haïfa, assumed a speed of 20kts between 16h30 (hour of depart) and 20h (time Claire said the boat stopped). That way I determined a rough point and then search west from that point. I picked it up quite easily with the radar in SEA mode and the FLIR. I agree that from there you just turn around above the boat and enjoy the fantastic voicings but that is something very unusual in DCS Thanks! That's smart. English is not my native language, I hadn't understand the boat was stranded. 1 Link to comment Share on other sites More sharing options...
lester Posted July 3, 2022 Share Posted July 3, 2022 In my case I just used radar in SEA mode and filtered out hits having speed more than 5 knots. Found the yacht relatively easy (its speed was 0 knots iirc so it corresponds to the "stranded" state pretty well) and confirmed visually with ATFLIR. 1 Все написанное выше является моим оценочным суждением Everything written above reflects my personal opinion Занимаюсь "активной пропагандой Американцев на данном форуме" © Flanker Link to comment Share on other sites More sharing options...
84-Simba Posted July 5, 2022 Author Share Posted July 5, 2022 Well, got it. GRCV is not working on PRI but on SEC. Link to comment Share on other sites More sharing options...
Yurgon Posted July 6, 2022 Share Posted July 6, 2022 (edited) On 7/1/2022 at 9:28 PM, 84-Simba said: Is that a trigger problem or is the GRCV option not working in the Hornet ? In testing, I always used GRCV on PRI and if I recall correctly, it always worked; there may have been one test-run where I had the same problem you described, I'm not sure any more. I'm pretty sure it's not a global problem in the Hornet, but I haven't tried in the latest OB. All I can say, it should work. Edited July 6, 2022 by Yurgon Link to comment Share on other sites More sharing options...
84-Simba Posted July 6, 2022 Author Share Posted July 6, 2022 It has been acknowledged as a Hornet bug by ED Team Link to comment Share on other sites More sharing options...
Yurgon Posted July 6, 2022 Share Posted July 6, 2022 Huh, okay, in that case I can stop the autostart and my current test-run of this mission. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now