dporter22 Posted July 14, 2022 Share Posted July 14, 2022 When attempting to drop two JDAMs on the same target in PP mode, the first hits the target correctly but the second always falls well short. Not just a few yards short, but not even in the vicinity. I enter all the parameters, select QTY and box two stations, then proceed as normal to release the weapons. Both weapons release but only the first gets to the target. What am I missing? Link to comment Share on other sites More sharing options...
Minsky Posted July 14, 2022 Share Posted July 14, 2022 1 hour ago, dporter22 said: What am I missing? A trackfile. Just tested with 2x and 4x GBU-38. All hit the exact same spot. Dima | My DCS uploads Link to comment Share on other sites More sharing options...
No Boundary Posted July 14, 2022 Share Posted July 14, 2022 You have to give the 2nd JDAM target coordinates as well. Just selecting two JDAMs won't do it. 1 Link to comment Share on other sites More sharing options...
Minsky Posted July 14, 2022 Share Posted July 14, 2022 To clarify: the six programs (PP1...PP6) are unique for each station (pylon), and not shared between them. Dima | My DCS uploads Link to comment Share on other sites More sharing options...
dporter22 Posted July 14, 2022 Author Share Posted July 14, 2022 So if you have to program two weapons with the same target coordinates, what's the purpose of the QTY option? And is there a way to copy the coordinates into the second weapon rather than entering everything twice? Link to comment Share on other sites More sharing options...
Dragon1-1 Posted July 14, 2022 Share Posted July 14, 2022 QTY allows you to release multiple weapons in a single pass. This has nothing to do with coordinates that are entered into them. No way to copy the coords over, as far as I figured. That said, in a real aircraft, you wouldn't be inputting them the way we do. In the real thing this is done before stepping, and loaded via the DTC. Which we don't have, so we have to punch everything in separately. 1 Link to comment Share on other sites More sharing options...
dporter22 Posted July 14, 2022 Author Share Posted July 14, 2022 Sorry, I'm confused. Releasing multiple weapons is what I want to do, but above it says selecting two JDAMs won't do that and you have to enter the same coordinates for two different weapons. Link to comment Share on other sites More sharing options...
Tholozor Posted July 14, 2022 Share Posted July 14, 2022 Do you have the JDAMs set for PP or TOO mode? REAPER 51 | Tholozor VFA-136 (c.2007): https://www.digitalcombatsimulator.com/en/files/3305981/ Arleigh Burke Destroyer Pack (2020): https://www.digitalcombatsimulator.com/en/files/3313752/ Link to comment Share on other sites More sharing options...
Solution Bunny Clark Posted July 15, 2022 Solution Share Posted July 15, 2022 1 hour ago, dporter22 said: Sorry, I'm confused. Releasing multiple weapons is what I want to do, but above it says selecting two JDAMs won't do that and you have to enter the same coordinates for two different weapons. You program target points for each bomb ahead of time, and then selecting QTY allows you to release multiple bombs with one pickle. Once released, each bomb will go to the target point it was assigned. You can program 4 bombs to 4 different targets, select QTY 4 to release 4 bombs at once, and they'll all guide on their own different targets. If you want to drop multiple bombs on the same point you'll need to program multiple stations to the same coordinates, or if you're dropping GBU-38s double-loaded onto the same station you can program the station to the target point and both bombs off that station will guide to the same location. Oil In The Water Hornet Campaign. Bunny's: Form-Fillable Controller Layout PDFs | HOTAS Kneeboards | Checklist Kneeboards Link to comment Share on other sites More sharing options...
dporter22 Posted July 15, 2022 Author Share Posted July 15, 2022 So the only thing QTY does is release multiple weapons in succession with one press of the release button, or you can press the release button multiple times to do the same thing since it cycles to the next stations anyway. I also tested whether you can release two weapons from the same station with one press of the release button and you cannot. You have to press the button twice. Link to comment Share on other sites More sharing options...
Dragon1-1 Posted July 15, 2022 Share Posted July 15, 2022 6 hours ago, dporter22 said: So the only thing QTY does is release multiple weapons in succession with one press of the release button, or you can press the release button multiple times to do the same thing since it cycles to the next stations anyway. QTY allows you to pickle them off more or less at once, which is way faster than trying to do that with multiple pickles. And yes, to drop more than one bomb per station, you have to pickle twice. Also, you program the bombs per station, so if you want to bomb 8 separate targets, you need to cycle to the second coordinate set for each of them. Inconvenient, but that's how it is in the real Hornet. It's possible to do in a single pass, but tricky. Link to comment Share on other sites More sharing options...
Recommended Posts