twistking Posted August 5, 2022 Share Posted August 5, 2022 Have been returning to the A-10c II after a long time and have trouble with the Countermeasures. I run manual mode, but my selected program gets overruled constantly and also my custom program gets reset. My workflow: I put the system to manual mode, select program Z (since A - M are reserved for semi and auto modes), modify program Z for what i need. If i now use the quick-access modes (cms switch in any direction), the system jumps back to program A for some reason and the modification i did to program Z are also reset. What am i doing wrong here? I suspect that program Z may be reserved for the quick-access programs, but this does not explain why it jumps to program A. How to use manual CMS on the current version of the sim? My personal wishlist after half a decade with DCS: https://forum.dcs.world/topic/184968-my-personal-wishlist-after-half-a-decade-with-dcs Link to comment Share on other sites More sharing options...
Solution twistking Posted August 6, 2022 Author Solution Share Posted August 6, 2022 ok. tested again and the problem seems to be the Z program. it seems to be used for the quick access programs as i suspected. using program Y for custom programming works flawlessly. 1 My personal wishlist after half a decade with DCS: https://forum.dcs.world/topic/184968-my-personal-wishlist-after-half-a-decade-with-dcs Link to comment Share on other sites More sharing options...
Recommended Posts