Jump to content

bug & problem report II.


Go to solution Solved by leg5840,

Recommended Posts

Posted

flight control

- Even if INLET S/W is set to EMERG, INLET CAUTION is not displayed.

 

fire control

- No reaction when pressing EMIS LMT.

- HUD Repeater does not function in FCP R/H MPD. CAM is fine.

 

Hydraulic

- The canopy control handle can go to the LOCKED position only when it is fully down and sliding, but it is skipped.

- If click the JFS handle at the single bottle start position, it is pulled to the second bottle start position. (Doesn't actually cause a dobble bottle start, only visually)

- After connecting ELECTRIC POWER (Ground PWR S/W 1A), if UTY PUMP is operated by Engine Dry Motoring, FLAP and S/B should work, but they do not work.

- After a long time after starting with the auto start sequence, the right engine was shut down and JFS START was attempted, but the engine did not start. JFS LOW also not displayed. It starts when the engine is started in the double bottle start position. At this time, JFS LOW is displayed. Suspected that there is probably a problem with the 1st bottle charging.

- After shutting down JFS again and waiting until the accumulator is charged (JFS LOW caution disappears), the same attempt was made, but at this time, double bottle start also did not function.

 

electrical

- Assuming DOUBLE GENERATOR FAILURE in the air, two GEN s/w were turned OFF, but MPCD and Backup ADI were not activated.

 

navigation

- After entering INS Off (5second wait) then NAV to try IFA, A/G radar PVU menu was entered, but IFA was not found.

- During autopliot, if passed to a place without STA information, hud STA information is output with a strange value.

 

fuel

- EMERGENCY CFT TRANSFER S/W does not function on the ground.

 

weapon system

- Even if PACS Ground power s/w is turned off, it is possible to enter the ARMT page.

 

Error/Dissatisfaction

- The sound of JFS RPM deceleration is not satisfactory during Engine Dry Motoring. I know the sound is WIP. Please note.

- Oxygen regulator gage does not swing according to breathing. Presumed to be unimplemented.

- CC reset button does not function

  • Like 3
Posted

sidewinder tone doesn't go away reverting to NAV or INST

where's the F15E Bug List ? great module btw will take time with the issues but it's getting better every time well done RAZBAM

The afterburner cause the left motor to starve by itself and doesn't restart about 16000 fuel low fuel audio and  Christmas tree alert showing  

:thumbup:

Posted

@leg5840

Thank you for these bug reports, though the correct way is to report one bug per post, as that will be easier to track for the devs and respond to.

And if a user has inputs that can be deemed as a solution, you can reward them by pressing the "solution button" on their post, so it's easier for other users to see that the post has a solution! 

Have a good day, cheers! 

  • Like 1
Posted
11 hours ago, MAXsenna said:

@leg5840

Thank you for these bug reports, though the correct way is to report one bug per post, as that will be easier to track for the devs and respond to.

And if a user has inputs that can be deemed as a solution, you can reward them by pressing the "solution button" on their post, so it's easier for other users to see that the post has a solution! 

Have a good day, cheers! 

If I write threads one by one, it becomes too much, can I?

Posted
7 hours ago, leg5840 said:

If I write threads one by one, it becomes too much, can I?

Yes, describe them thoroughly and go on. Tracks, screenshots, the more the better. Also check the game manual for things that are not implemented yet or not even planned.

🖥️ Win10  i7-10700KF  32GB  RTX4070S   🥽 Quest 3   🕹️ T16000M  VPC CDT-VMAX  TFRP   ✈️ FC3  F-14A/B  F-15E   ⚙️ CA   🚢 SC   🌐 NTTR  PG  Syria

  • 1 month later...
  • Solution
Posted

Patched. Partially resolved. I will organize it again and post it later.

 

 

flight control

- Even if INLET S/W is set to EMERG, INLET CAUTION is not displayed.

 

I was misinformed about this. Sorry for submitting the wrong bug report.

 

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...