DmitriKozlowsky Posted Monday at 12:21 AM Share Posted Monday at 12:21 AM Well the problem has returned. So once again. I am unable to arm the OH-6. I have not seen behavior as this. Where mpd works for some time, then stops working in part. Its not practical to keep on reinstalling DCS and then mods and liveries for sake of module. OH-6A is amazing , when it works. But as it stands, in my case, its a civilian helicopter. Even though 'civilian ' option is OFF. Link to comment Share on other sites More sharing options...
DmitriKozlowsky Posted Monday at 02:03 AM Share Posted Monday at 02:03 AM I was happy with OH-6A with 1.5.0 ver. Worked greak. Initially, 1.51 was even better. Then without warning, error, or logical cause, I lost ability to arm the OH-6A. In mission it would always load with , I guess, an internal default. Doors ON, no weapons, no RWR, no wire cutter. If flare dispencer geometry was visible, there would be no dispencer Arm/OFF and no dispence button.Reinatalling the 1.51, the patch, and all relevant scripts did not fix the issue. Then DCS got updated 2.9.9. 2XXX MT latest. I reinstalled 1.51. It worked for single session of DCS. After relaunching DCS sometime later, the problem of inability to arm, returned. Then reinstalled DCS fresh. Ran the latest update. Reinstalled all mods fresh. Reinstsalled OH-6A 1.51. Worked fine for two sessions. On third relaunch of DCS, inability to arm OH-6A returned. So who knows whats going on. Link to comment Share on other sites More sharing options...
Devil 505 Posted Monday at 04:19 AM Share Posted Monday at 04:19 AM Getting after it with the OV-10 on our Vietnam mission. Had our Cayuse boys down below earlier, but due to the extreme fun flying, the record key was hit late. Flying the OV-10 would not be near as much fun without the coop of our scouts down below. 4 Link to comment Share on other sites More sharing options...
tobi Posted Monday at 05:00 AM Author Share Posted Monday at 05:00 AM 5 hours ago, Rudel_chw said: You are wasting your time answering this person .. I have him on ignore since a long time ago ... unfortunately I still have to see his drivel when people quotes him I'll do the same now thx 4 Link to comment Share on other sites More sharing options...
KrazyPilot Posted Monday at 05:43 AM Share Posted Monday at 05:43 AM 3 hours ago, DmitriKozlowsky said: I was happy with OH-6A with 1.5.0 ver. Worked greak. Initially, 1.51 was even better. Then without warning, error, or logical cause, I lost ability to arm the OH-6A. In mission it would always load with , I guess, an internal default. Doors ON, no weapons, no RWR, no wire cutter. If flare dispencer geometry was visible, there would be no dispencer Arm/OFF and no dispence button.Reinatalling the 1.51, the patch, and all relevant scripts did not fix the issue. Then DCS got updated 2.9.9. 2XXX MT latest. I reinstalled 1.51. It worked for single session of DCS. After relaunching DCS sometime later, the problem of inability to arm, returned. Then reinstalled DCS fresh. Ran the latest update. Reinstalled all mods fresh. Reinstsalled OH-6A 1.51. Worked fine for two sessions. On third relaunch of DCS, inability to arm OH-6A returned. So who knows whats going on. Did you try uninstalling all other mods except just the OH-6A? That way you can isolate the problem to only being from this mod itself and not from other mods..? 2 Rig Specs: 34" 3440x1440 Monitor - CPU: Ryzen 7800X3D - GPU: XFX RX 7900 XT Speedster MERC 310 - MOBO: GIGABYTE B650 AORUS ELITE AX - SSD: WD BLACK SN-850X 2TB + SN-770 2TB - RAM: 6000Mhz 64GB Link to comment Share on other sites More sharing options...
ED Team BIGNEWY Posted Monday at 08:11 AM ED Team Share Posted Monday at 08:11 AM Folks please stay on topic here - OH-6A If you are having issues with your system or crashes use the bugs forum area. thank you 7 Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal Link to comment Share on other sites More sharing options...
Hiob Posted Monday at 09:33 AM Share Posted Monday at 09:33 AM 22 hours ago, CommandT said: Made a little video with the new OH-6 patch. Love the strut compression and skid friction physics! Well done guys! I know it's been mentioned before a few times but a virtual pilot body would really complete this mod/ module. Otherwise I'm running out of any constructive criticisms. Chopper feels bloody brilliant Oh, there is a little bug - when landing on the school bus, if you land a little too far forward on the pad, or a little too far backward, the skids fall/go through the pad at the edge. Just a minor thing (not seen in the video). Awesome video and flying skills! 2 "Muß ich denn jedes Mal, wenn ich sauge oder saugblase den Schlauchstecker in die Schlauchnut schieben?" Link to comment Share on other sites More sharing options...
Slippa Posted Monday at 10:06 AM Share Posted Monday at 10:06 AM 24 minutes ago, Hiob said: Awesome video and flying skills! Yeah, watching makes ya wanna fly it eh. He’s making it look easy, don’t think I’ll be posting my efforts just yet . Have to agree, it’s gotta be some of the most fun to be had in DCS. As well as the gifts in the assets packs with it. We’re spoilt rotten and I love it. Great job. 2 Link to comment Share on other sites More sharing options...
VR Flight Guy in PJ Pants Posted Monday at 12:50 PM Share Posted Monday at 12:50 PM With all due respect, using bond rating in terms of DCS mod quality, A+ is too low, AA+ is closer to reality. Keep up the good work people! 6 I Fly, Therefore I Am. YouTube: https://www.youtube.com/channel/UCc9BDi-STaqgWsjNiHbW0fA Make OH-6A Official! Link to comment Share on other sites More sharing options...
DeTesla Posted Monday at 04:40 PM Share Posted Monday at 04:40 PM The best freeware helicopter for DCS ever to come out from a freeware developer! Keep up the good work! 5 Norwegian Rotorhead w\ All Helicopters Watercooled AMD FX-8350 | Geforce 1060 6GB | 16 GiG DDR3 | Warthog Everything w/ pendulum pedals | Rift VR Watercooled AMD Ryzen 9500X | RTX 3080 12GB | 64 GB DDR4 3600mhz | Warthog Everything w/Pendulum Pedals | Rift VR (CV1) Link to comment Share on other sites More sharing options...
cgjimeneza Posted Tuesday at 01:43 AM Share Posted Tuesday at 01:43 AM hi... is the OH-6 selectable in the mission editor? for the life of me I cannot find it after octobers patch and v1.5 of the mod. Link to comment Share on other sites More sharing options...
Rudel_chw Posted Tuesday at 01:55 AM Share Posted Tuesday at 01:55 AM 11 minutes ago, cgjimeneza said: hi... is the OH-6 selectable in the mission editor? for the life of me I cannot find it after octobers patch and v1.5 of the mod. Check that you have not enabled the historic filter, no user mod is compatible with that ME feature. 4 For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra For Gaming: 34" Monitor - Ryzen 3600 - 32 GB DDR4 2400 - nVidia RTX2080 - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar Mobile: iPad Pro 12.9" of 256 GB Link to comment Share on other sites More sharing options...
VR Flight Guy in PJ Pants Posted Tuesday at 08:18 AM Share Posted Tuesday at 08:18 AM Some time, when some country is selected, the OH-6A is not on the list. IIRC, Cyprus is one of them. 1 I Fly, Therefore I Am. YouTube: https://www.youtube.com/channel/UCc9BDi-STaqgWsjNiHbW0fA Make OH-6A Official! Link to comment Share on other sites More sharing options...
Hiob Posted Tuesday at 10:57 AM Share Posted Tuesday at 10:57 AM You can choose "Red Coalition" or "Blue Coalition" to bypass this problem. 1 "Muß ich denn jedes Mal, wenn ich sauge oder saugblase den Schlauchstecker in die Schlauchnut schieben?" Link to comment Share on other sites More sharing options...
SparrowLT Posted Tuesday at 12:51 PM Share Posted Tuesday at 12:51 PM It definitily is avalaible.. i did some missions to play with it .. as Hiob says just select "blue/red coalition" and all units show up 2 Link to comment Share on other sites More sharing options...
Devil 505 Posted yesterday at 04:24 AM Share Posted yesterday at 04:24 AM Another quick flight tonight after the second ED hotfix. Several Hot LZ rescues before shutting her down for the night. 2 Link to comment Share on other sites More sharing options...
DmitriKozlowsky Posted yesterday at 04:34 AM Share Posted yesterday at 04:34 AM Just got updated to 2.9.9.2474 MT. Ran 5 sessions. OH-6A works fine now. Configures, arms. Skid friction seems correct'er. Not sure if thats DCS or OH-6 mod working. I used to experience strong dynamic rollovers. Which I attributed to my inexperience with mod. As a side notre. How do skid helicopters properly interact with ATC for taxi and take off. Becouse skid helicopters have to taxi about 5 feet alt at 10 knots hovertaxi speed. But ATC considers helicotper not in contact with tarmac to be in flight. Link to comment Share on other sites More sharing options...
aceviper Posted 22 hours ago Share Posted 22 hours ago Just a reminder This is NOT payware 2 of the best modders in the entire DCS community https://ko-fi.com/taesimulations Buy them a coffee to help continue their awesome work 8 Link to comment Share on other sites More sharing options...
Recommended Posts