Need help setting up 2nd monitor, export TEDAC

[Hammer1-1]

Currently have a Samsung Ark 55" monitor and a TEDAC monitor that I am trying to set up. When I try to run DCS in this resolution (4440x2160) the picture on the main monitor squishes instead of pushing over to the TEDAC monitor. I get a black bar on the right hand side of the monitor and my desktop picture on my TEDAC monitor. Would like to know what Im doing wrong if anyone can help me out. Thanks in advance!

I have dcs set to 4440x2160, my monitor resolution at 4440x2160, the TEDAC at the right bottom side of the monitor via display settings, not underneath. The monitors main resolution is 3840x2160 with 600x800 for the TEDAC. Ive also tried with the monitor underneath the main screen with a different lua file.

Camera + TEDAC(2).lua

本帖最后于2024年7月23日，由Hammer1-1编辑

[tedster2]

I just ran into this issue with my two monitors and I fixed it by enabling fullscreen, restarting dcs, and disabling fullscreen.

Are you using any additional software like DCS Device Server?

本帖最后于2024年8月19日，由tedster2编辑

[Hammer1-1]

No. Anyways, this problem was fixed. Dont ask; it took almost 2 full months troubleshooting to figure out how best to get this thing to work, and I wasnt the one who made the lua file.,,but damn if it wasnt a long, complicated task. Its still a bit buggy, but it works, perfectly, and its only buggy when I switch profiles.

本帖最后于2024年8月20日，由Hammer1-1编辑

[jonsky7]

On 8/20/2024 at 5:22 PM, Hammer1-1 said:

No. Anyways, this problem was fixed. Dont ask; it took almost 2 full months troubleshooting to figure out how best to get this thing to work, and I wasnt the one who made the lua file.,,but damn if it wasnt a long, complicated task. Its still a bit buggy, but it works, perfectly, and its only buggy when I switch profiles.

 

There's no real reason to switch profiles for display export purposes any more.

You can create a monitor config file that configures the exports depending on the aircraft being flown.

 

See here

Under the title  "Advanced editing by aircraft type"

https://forum.dcs.world/topic/258724-how-to-multi-monitor-mfcd-display-export-set-up-guide-july-2023-updated/?do=findComment&comment=4537816

 

[Hammer1-1]

4 hours ago, jonsky7 said:

There's no real reason to switch profiles for display export purposes any more.

You can create a monitor config file that configures the exports depending on the aircraft being flown.

 

See here

Under the title  "Advanced editing by aircraft type"

https://forum.dcs.world/topic/258724-how-to-multi-monitor-mfcd-display-export-set-up-guide-july-2023-updated/?do=findComment&comment=4537816

 

Im not willing to mess with it anymore since it finally works...