Jump to content

Heli Heat Blur Mod


diveplane

Recommended Posts

Hey diveplane (and Folks) !

You can try my old settings:

Cheers:smilewink:

1week Download from here:

helicopter_exhaust.lua

 

https://www.yousendit.com/dl?phi_action=app/orchestrateDownload&rurl=https%253A%252F%252Fwww.yousendit.com%252Ftransfer.php%253Faction%253Dbatch_download%2526batch_id%253DYWhPQk0ySytoeWF4dnc9PQ

 

or:

***********************************************************

 

 

-- Copyright © 2004, Eagle Dynamics.

-- the file is not intended for an end-user editing

-- level 4

-- all level4 loaded from wsTypes.lua , before executing this files

 

Default = 1

 

-- Remember: You can set back (options) Exhaust Effect with Default = 0

-- Exhaust/Heat Blur effects Repositioned, Reorientated and stronger (more visible) than "factory" visuals (like IRL IMO)

-- All Heat Blur/Exhaust effect is optimized for low speed flying/searching --> 30-40 km/h,

-- except the AH-64D Longbow which is optimized for starting/taking off situation when the ground effect is significant

-- If you want to see correct Longbow heat blur in the air: overwrite AH-64D datas with AH-64A values !

-- CH-53E has got 3 turboshaft engines, fixed: added 1 more exhaust effect

-- Mi-26 has got the strongest engines therefore i added 2 exhaust "beam" per engine

-- (3 "beam" per engines should be better but heat blur effect eats some FPS so i stayed at 2 "beam")

-- SH-3H (the SH-3W name wrong in game) got 2 engines but gearbox cooler/exhauster generates another heat blur effect IRL,

-- so i corrected the positions of 2 engine exhausters and added 1 more weaker exhaust effect

-- Mi-28N has the weakest/smallest heat signature (just like IRL: got special exhaust cooler system)

-- Single engine models are not working (invisible heat blur) with zero (pos & ori) values, fixed: added 0.001 values

--

-- Eagle Dynamics please use this values if you need it

--

-- April, 2009, HungaroJET

-- HAVE A BADIT DAY ;)

--------------------------------------------------------

 

 

exhaust_data = {

[KA_50] =

{

nozzle = {{pos = {-0.388,0.594, 1.399},orientation = {0.3,0.5,-1}},

{pos = {-0.388,0.594,-1.399},orientation = {0.3,0.5, 1}}},

nozzle_coefficient = 0.6

},

[KA_52] =

{

nozzle = {{pos = {-1.088,0.394, 1.599},orientation = {0.3,0.5,-1}},

{pos = {-1.088,0.394,-1.599},orientation = {0.3,0.5, 1}}},

nozzle_coefficient = 0.6

},

[MI_24W] =

{

nozzle = {{pos = {0.78,1.095, 0.802},orientation = {0.25,0.5,-1}},

{pos = {0.78,1.095,-0.602},orientation = {0.25,0.5, 1}}},

nozzle_coefficient = 0.7

},

[MI_8MT] =

{

nozzle = {{pos = {0.847,1.342, 0.675},orientation = {0.25,0.5,-1}},

{pos = {0.847,1.342,-0.675},orientation = {0.25,0.5, 1}}},

nozzle_coefficient = 0.8

},

[AB_212] =

{

nozzle = {{pos = {-2.641,1.51,-0.001},orientation = {1,0.4,0.001}}},

nozzle_coefficient = 0.8

},

[OH_58D] =

{

nozzle = {{pos = {-1.84,1.76,-0.001},orientation = {1,0.5,0.001}}},

nozzle_coefficient = 0.7

},

[KA_27] =

{

nozzle = {{pos = {0.657,1.112, 0.995},orientation = {0.25,0.5,-1}},

{pos = {0.657,1.112,-0.995},orientation = {0.25,0.5, 1}}},

nozzle_coefficient = 0.7

},

[MI_26] =

{

nozzle = {{pos = {1.209,0.515, 1.373},orientation = {0.4,0.5,-1}},

{pos = {1.209,0.516, 1.373},orientation = {0.36,0.25,-1}},

{pos = {1.209,0.516,-1.373},orientation = {0.36,0.25, 1}},

{pos = {1.209,0.515,-1.373},orientation = {0.4,0.5, 1}}},

nozzle_coefficient = 1.8

},

[sH_60B] =

{

nozzle = {{pos = {-1.933, 0.871, 0.804},orientation = {1,0.5,-0.2}},

{pos = {-1.933, 0.871,-0.804},orientation = {1,0.5, 0.2}}},

nozzle_coefficient = 0.8

},

--[AH_60L] = you don't need this :)

-- {

-- nozzle = {{pos = {-2.633, 0.471, 0.904},orientation = {1,0.45,-0.15}},

-- {pos = {-2.633, 0.471,-0.904},orientation = {1,0.45, 0.15}}},

-- nozzle_coefficient = 0.7

-- },

[uH_60A] =

{

nozzle = {{pos = {-2.633, 0.471, 0.904},orientation = {1,0.5,-0.15}},

{pos = {-2.633, 0.471,-0.904},orientation = {1,0.5, 0.15}}},

nozzle_coefficient = 0.8

},

[sH_3H] =

{

nozzle = {{pos = {-3.039 ,1.993,0.001},orientation = {1,0.4,0.001},nozzle_coefficient = 0.4},

{pos = {1.239 ,2.193,0.701},orientation = {1,0.3, -0.25},nozzle_coefficient = 1.2},

{pos = {1.239 ,2.193,-0.701},orientation = {1,0.3, 0.25},nozzle_coefficient = 1.2}}

},

[CH_53E] =

{

nozzle = {{pos = {-1.055 , 0.801 , 1.843},orientation = {1,0.5,-0.6}},

{pos = {-3.855 , 1.101 ,-0.643},orientation = {0.8,0.5, 1}},

{pos = {-1.055 , 0.801 ,-1.843},orientation = {1,0.5, 0.6}}},

nozzle_coefficient = 1.5

},

[AH_64A] =

{

nozzle = {{pos = {-2.555 , 0.201 , 0.843},orientation = {1,0.5,-0.44}},

{pos = {-2.555 , 0.201 ,-0.843},orientation = {1,0.5,0.44}}},

nozzle_coefficient = 0.6

},

[AH_64D] =

{

nozzle = {{pos = {-2.555 , 0.201 , 0.843},orientation = {1,0.25,-0.44}},

{pos = {-2.555 , 0.201 ,-0.843},orientation = {1,0.25,0.44}}},

nozzle_coefficient = 0.6

},

[AH_1W] =

{

nozzle = {{pos = {-2.605 ,0.221 , 0.213},orientation = {1,0.4,-0.05}},

{pos = {-2.605 ,0.221 ,-0.213},orientation = {1,0.4,0.05}}},

nozzle_coefficient = 0.7

},

[MI_28N] =

{

nozzle = {{pos = {-3.055 , 0.501 , 1.003},orientation = {0.7,1,0.02}},

{pos = {-3.055 , 0.501 ,-1.003},orientation = {0.7,1,0.02}}},

nozzle_coefficient = 0.4

},

[CH_47D] =

{

nozzle = {{pos = {-5.605 , 1.251 , 1.203},orientation = {1,0.35,-0.07}},

{pos = {-5.605 , 1.251 ,-1.203},orientation = {1,0.35,0.07}}},

nozzle_coefficient = 1.0

},

}

Atop the midnight tarmac,

a metal beast awaits.

To be flown below the radar,

to bring the enemy his fate.

 

HAVE A BANDIT DAY !

 

[sIGPIC][/sIGPIC]

"When I'm working on a problem, I never think about beauty. I think only how to solve the problem. But when I have finished, if the solution is not beautiful, I know it is wrong." - R. Buckminster Fuller (1895 - 1983), American Architect, Author, Designer, Inventor, and Futurist

Link to comment
Share on other sites

this will fail IC checks on servers.

" any failure you meet, is never a defeat; merely a set up for a greater come back, "  W Forbes

"Success is not final, failure is not fatal, it is the courage to continue that counts,"  Winston Churchill

" He who never changes his mind, never changes anything," 

MSI z690MPG DDR4 || i914900k|| ddr4-64gb PC3200 || MSI RTX 4070Ti|Game1300w|Win10x64| |turtle beach elite pro 5.1|| ViRpiL,T50cm2|| MFG Crosswinds|| VT50CM-plus rotor Throttle || G10 RGB EVGA Keyboard/MouseLogitech || PiMax Crystal VR || 32 Samsung||

Link to comment
Share on other sites

Hey diveplane (and Folks) !

You can try my old settings:

Cheers:smilewink:

1week Download from here:

helicopter_exhaust.lua

 

https://www.yousendit.com/dl?phi_action=app/orchestrateDownload&rurl=https%253A%252F%252Fwww.yousendit.com%252Ftransfer.php%253Faction%253Dbatch_download%2526batch_id%253DYWhPQk0ySytoeWF4dnc9PQ

 

or:

....... lalalalllalalllalllalala....

 

Looks great! THX

 

Greets

S@uDepp

// Hasi @4,5 GHz @ H100i // Asrock Z87M Extreme 4 // Avirex 4x4GB // PALIT 1070 GTX SuperJetStream // Corsair 350D // Plextor extern // DELL 2407WFP // Razer Lancehead // 2xThrustmaster T.16000M + Saitek Pedals Pro // Oculus Rift // 3x amBX // Win10 Pro x64

Link to comment
Share on other sites

Pain ;(

 

this will fail IC checks on servers.
:doh:

 

Use a password on the server :pain:

 

Exhaust.lua is only for visual ! As i see this mod not a mod, its an addon.

It's changing "nothing", but adding something - new :thumbup:

 

Otherwise: Which dumbass puting the exhaust.lua into IC ? :doh:

Which peabrain thinks this "mod"?<:megalol: will give advantages to the "mod" (client-cheater) user ?:bash:

 

I suggest (to server) than put whole virgin LOFC2 directory into IC and use forced 640x480 resolution only, with extra low graphic settings :smartass: = happiness

sign-pic4.jpg

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...