Whisky One Posted August 1, 2012 Posted August 1, 2012 that's great info! thanks a lot. now the decals make sense. Ill make the handles first and trim the decals.
Deadman Posted August 1, 2012 Author Posted August 1, 2012 Great good luck on the build:thumbup: https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
deaconjb Posted October 23, 2012 Posted October 23, 2012 Decals All of the Decal sheets have been sold. I will not be making another order Thanks guys I hope you all enjoy them i am still working on a placement lay out for all of the MIP and cockpit decals. Any chanced I could get a copy of your decal files? I'd like to get some printed. Thx :) [sIGPIC][/sIGPIC]
Deadman Posted January 9, 2013 Author Posted January 9, 2013 (edited) I know I posted that I would not make any more of the the first batch was not an easy sell but if there are 25 of you interested in the decal sets I can see what I can do .:thumbup: Edited January 10, 2013 by Deadman https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Combat2468 Posted January 19, 2013 Posted January 19, 2013 +1 My Pit Build http://forums.eagle.ru/showthread.php?t=100819
agrasyuk Posted January 19, 2013 Posted January 19, 2013 dang, this completely went under a radar for me, was busy bicycling summer . i'd go for a set Anton. My pit build thread . Simple and cheap UFC project
Sabre-TLA Posted January 20, 2013 Posted January 20, 2013 Me too! MapleFlagMissions - Read Our Blog for Updates
Deadman Posted January 20, 2013 Author Posted January 20, 2013 Spreed the word if you guys want these :thumbup: They are professionally printed on great material. I have not heard of any complaints but slow customs officials :music_whistling:. These decals are not just for the ACES II , everything in the cockpit that is a decal is on the sheet including extra knob markers. This is a great value compared to the cost of other cockpit decals for the number of decals you get.:thumbup: https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
SkyKnight Posted February 5, 2013 Posted February 5, 2013 I will purchase a set as well. How many more customers do you need? I can drum up at least 2 more if needed.
Deadman Posted February 6, 2013 Author Posted February 6, 2013 Only the 5 people that have posted here. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Hansolo Posted February 6, 2013 Posted February 6, 2013 Hi Deadman, I am in for one set if sale is still open. Pm inbound. cheers Hans 132nd Virtual Wing homepage & 132nd Virtual Wing YouTube channel My DCS-BIOS sketches & Cockpit Album
Deadman Posted February 6, 2013 Author Posted February 6, 2013 This is open until there are enough people for an order for what these cost to print. I can not afford to have many sitting on a shelf :thumbup: https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
TomDK Posted February 6, 2013 Posted February 6, 2013 ... and a set for me , please ! Cheers Tom My old, sold, pit: http://bilder.einzelart.de/thumbnails.php?album=74&page=3
whartsell Posted February 6, 2013 Posted February 6, 2013 Ill take 1-2 sets Arduino,EOS and Helios Tutorial Static ATC menu mod
agrasyuk Posted February 7, 2013 Posted February 7, 2013 Daily UP. I will take 2 sheets as well if it helps to move the ball. I'm sure someone will want one once run is compete Anton. My pit build thread . Simple and cheap UFC project
Deadman Posted February 7, 2013 Author Posted February 7, 2013 If the interest in the A-10 ACES II and cockpit decal sheet grows a bit i may be able to rework it. On the original there are two sets of the call sign numbers this could be changed to just one . There is all so two different Decal for the extend sequencer one is the new style that is a rectangle the other a trapezoid removing these duplicates. That were place to give you a choice could be removed to make room for several control panel markings. Such as the DOWN LOCK OVERRIDE on the landing gear panel the 6 white blocks on the KY 58 panel and the ARM GROUND SAFETY red decal. These are just off the op of my head let me know what you guys think. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
agrasyuk Posted February 7, 2013 Posted February 7, 2013 (edited) , as i said in PM I'd love to see the downlock ovrd striping sticker sized 1:1 with original. If not, well, I'll be cutting yellow sticker paper with a hobby knife :) Emergency flight panel stripes also could be of use , but that I'm not to stressed about. briefly looked at available decals for car and railroad models and seen a couple that could work with some modification. Edited February 7, 2013 by agrasyuk Anton. My pit build thread . Simple and cheap UFC project
Combat2468 Posted February 7, 2013 Posted February 7, 2013 Daily UP. I will take 2 sheets as well if it helps to move the ball. I'm sure someone will want one once run is compete Can double me up as well DM if it helps out. My Pit Build http://forums.eagle.ru/showthread.php?t=100819
Deadman Posted February 7, 2013 Author Posted February 7, 2013 (edited) The listing of the modifications is do to your Pm I am not sure wahat you mean by "with original" though the stripes on the Emergency flight panel are painted on the panel and i am not sure if i could fit all of them on the sheet with what is being removed , as i said in PM I'd love to see the downlock ovrd striping sticker sized 1:1 with original. If not, well, I'll be cutting yellow sticker paper with a hobby knife :) Emergency flight panel stripes also could be of use , but that I'm not to stressed about. briefly looked at available decals for car and railroad models and seen a couple that could work with some modification. Edited August 11, 2013 by Deadman https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Woogey Posted February 8, 2013 Posted February 8, 2013 I missed the price somewhere along the line? Where are you shipping from Deadman?
Deadman Posted February 8, 2013 Author Posted February 8, 2013 U.S.A Price I have not even check in to yet depend on how many Sheets are ordered and if the guys want a rework on the sheet with decal changed so there would be a set up fee . The first set price was $35 for the sheet https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
agrasyuk Posted February 8, 2013 Posted February 8, 2013 If the cost to rework this is significant I can get by without any changes Anton. My pit build thread . Simple and cheap UFC project
Deadman Posted February 12, 2013 Author Posted February 12, 2013 How much is significant ? https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Dachs Posted February 13, 2013 Posted February 13, 2013 I'm in for one sheet please System: Asus z270 A Prime, Intel i7-7700K 4.8GHz, 32GB DDR4, RTX2080, Samsung 500GB 850 EVO SSD. Valve Index VR, TM Warthog Throttle & Grip, Virpil MongoosT-50CM2 base, TM TPDR Rudders. OS: Win10 Home
Recommended Posts