The LT Posted January 10, 2013 Posted January 10, 2013 Greetings, fellow pilots, Trying to do my best to defend Georgia from the damn russkies, I've encountered a snag. I got a mission with the objective to support the advance of Pike and Maple to objective points Dakota and Nevada. Got all the frequencies tuned in, taking off, getting to the target area, contacting JTAC and carrying out the strikes that he pinpoints. Rinse and repeat with the second JTAC. I actually went through and wiped out everything in the vicinity, including the trucks and arty. But I don't get the "mission complete" message. Now, that got me thinking. The units should probably move in to the designated objective points (dakota, nevada). When I'm ingressing, there is a message that "Pike is ready" or something along those lines. I've tried to raise those guys via F10 on every radio, but no dice. :((( They just stay in the city and don't move even when I kill all the enemy tanks in the area. How should I go about contacting them? There isn't any specific frequency assigned to them, only the JTAC's at 40 and 30 mhz VHF FM and allied flights at 251 UHF AM. Any pointers? :) NATO's loosing their war effort here! :) My controls & seat Main controls: , BRD-N v4 Flightstick (Kreml C5 controller), TM Warthog Throttle (Kreml F3 controller), BRD-F2 Restyling Bf-109 Pedals w. damper, TrackIR5, Gametrix KW-908 (integrated into RAV4 seat) Stick grips: Thrustmaster Warthog Thrustmaster Cougar (x2) Thrustmaster F-16 FLCS BRD KG13 Standby controls: BRD-M2 Mi-8 Pedals (Ruddermaster controller) BRD-N v3 Flightstick w. exch. grip upgrade (Kreml C5 controller) Thrustmaster Cougar Throttle Pilot seat
Frogfoot1606687865 Posted January 10, 2013 Posted January 10, 2013 There are two versions of that campaign. one is for use with the A10 only and allows you to use f10 to order the units forward when you have cleared the area. The other version is for use with Combined arms an addition to A10. You have to order the units forward from CA after you have cleared the hostiles. Windows 10 Pro 64bit, Gigabyte EX58-UD5, Intel i7 920 Corsair H70 water cooled @4GHz), Corsair XMS3 12GB (6x2GB) DDR3 PC3-12800C8 (1600MHz) Tri-Channel, Nvidia GTX780, OCZ Vertex 256GB SSD (for OS+DCS), TrackIR 5, TM Warthog HOTAS + Saitek Rudder
The LT Posted January 10, 2013 Author Posted January 10, 2013 So, there's no way to complete those unless you get CA, then, I guess. Oh well, time to get CA. :) My controls & seat Main controls: , BRD-N v4 Flightstick (Kreml C5 controller), TM Warthog Throttle (Kreml F3 controller), BRD-F2 Restyling Bf-109 Pedals w. damper, TrackIR5, Gametrix KW-908 (integrated into RAV4 seat) Stick grips: Thrustmaster Warthog Thrustmaster Cougar (x2) Thrustmaster F-16 FLCS BRD KG13 Standby controls: BRD-M2 Mi-8 Pedals (Ruddermaster controller) BRD-N v3 Flightstick w. exch. grip upgrade (Kreml C5 controller) Thrustmaster Cougar Throttle Pilot seat
The LT Posted January 10, 2013 Author Posted January 10, 2013 I've started a campaign without CA and managed to complete the mission successfully, though it took quite a lot of time for friendlies to reach the points. (time acceleration for the win). I guess there should be some sort of warning if Combined Arms is not installed or DCS World should prevent the start-up of the CA campaign altogether. It is also unclear on what frequency to contact the forces, I guess it's just a hardcoded "universal command" of some sort at the moment as I had my radio switch doohicky whatsitcalledargh set to Intercom and still managed to send the M1's rolling. :) My controls & seat Main controls: , BRD-N v4 Flightstick (Kreml C5 controller), TM Warthog Throttle (Kreml F3 controller), BRD-F2 Restyling Bf-109 Pedals w. damper, TrackIR5, Gametrix KW-908 (integrated into RAV4 seat) Stick grips: Thrustmaster Warthog Thrustmaster Cougar (x2) Thrustmaster F-16 FLCS BRD KG13 Standby controls: BRD-M2 Mi-8 Pedals (Ruddermaster controller) BRD-N v3 Flightstick w. exch. grip upgrade (Kreml C5 controller) Thrustmaster Cougar Throttle Pilot seat
Recommended Posts