Drippy Posted February 12, 2013 Posted February 12, 2013 Hello, I have been trolling for a while and can usually find all the info i need from all of your informaitonal posts. This is my issue. I load up A-10C in my controller software and it works great (SST). I then made a profile (SST Software for X52 Saitek) for the SU25T (I wanted to try it out) Non of my shift states work??. What I mean is. for start up or anything. If I press ALT-Home on the controller to start an engine the game just sees the Home being pressed. I DO not have this issue with my A-10C at all commands work I can start my engines, landing gear, Flaps Etc. So for some reason the game is blocking, Shift, ALT, Contorl etc. They all show up in my profile and when I check it with word or anything else I get the correct command prompts. So I am pretty sure that the controller is working fine. It works great in A-10C. I just wanted to move some mud with the SU-25T. Any ideas would be great. Also my FC3 F-15C is doing the same thing now?. Never had a problem when I first installed FC3 Sorry for the long winded post. Drippy
pepin1234 Posted February 12, 2013 Posted February 12, 2013 Also confirmed by me. I have this problem with my joystick too. [sIGPIC][/sIGPIC]
SkateZilla Posted February 12, 2013 Posted February 12, 2013 ALT-TAB to desktop, then ALT-TAB Back to Cockpit and see if that fixes it. I think it was already submitted to ED though. http://forums.eagle.ru/forumdisplay.php?f=189 Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
Drippy Posted February 12, 2013 Author Posted February 12, 2013 Thanks for the reply's. Also I am kinda glad its not only me (sorry guys). you seemed to link me to the controller section (not an individual post) and I found some similar problems so I will try that when i get home and fire up my office. I hope it works I have WAY to many hrs in setting up my SU-25T Profile. And with SST my A-10C profile works amazing. I'll follow up this eve or tomorrow. Tanks, Drippy
SkateZilla Posted February 12, 2013 Posted February 12, 2013 Cuz this is a controller bug, so the mods will most likely move this thread there. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
HiJack Posted February 12, 2013 Posted February 12, 2013 Have you remember to clear the joystick assignments for the Su-25T in DCS Options? If not the already programmed settings will interfear with the SST programming. Remember there is one config for each aircraft!
Drippy Posted February 12, 2013 Author Posted February 12, 2013 (edited) Yeah I have cleared the commands for all the aircraft. Thanks for the tip though. Im about to get home so I can Check out if any of the other tips I found work. the game sees the button pressed but not any of the shift states. IE: if a button is Alt+Home to start engine. The game only sees the home. So on Flaps it kinda works but only as F not Shift+F to raise Alt+F to lower (or what ever the proper commands are im not looking at them) If not its cool I am in love with a-10C and my controls work perfectly in that. I bought FC3 more to support the Devs. not really interested in the simpler sims. I saw a youtube vid on the SU-25T and I allways liked that mudmover back in the User made BF2 Mods. FIXED_for some reason when I programed my controller with simple commands it does not hold down the shift state for long enough. I do not know how to link to other posts. But the title is "Some one have this problem with X52pro" My issue needed the same fix. So now I just need to tweek some of the buttons. For some reason it is NOT an issue with A-10C that controller profile works fine. Edited February 13, 2013 by Drippy Fixed Problem
BRooDJeRo Posted February 13, 2013 Posted February 13, 2013 Some older X52's and X52's have minor bugs in the firmware. According to personal communication it doesnt seem possible to upgrade the firmware. The is because there isnt any firmware upgrade available, there is no USB software for a possible upgrade or cheaper EPROMS are used instead of EEPROMS. Once the chip is pre-programmed in the chipmachine its installed and permanent. In my case i have a bug when i use a commandname that is longer than the width of the MFD, it will lock up and freeze the PC's USB system. Hard reboot is the only option to recover. Newer X52 Pro's do seem to have firmware upgrade possibilitys isnt it?
Meatwod Posted February 13, 2013 Posted February 13, 2013 If you are using "New Button Presses", Try using a "New Advanced Command" using the "Press" field and set the quantize time to 0.010 between each button press. Sometimes this is too fast, but it seems to work most of the time. Also try putting shift command first and the key command second. Then swap to test if the order matters. Try the reverse and see if either method works. My X-52 (standard) has no problems with ALT, SHIFT, or CNTRL used in conjuction with other keys. If you see me on one of FC3 servers, send me a chat and we'll jump on team speak and try and get this sorted.
Recommended Posts