Jump to content

Rotor tears off immediately


Recommended Posts

Is your physical throttle( collective ) all the way down BEFORE you start the mission?

Regards,

=170= Sven ☠ 2157

 

Windows 10 64 bit | Intel 7th Gen. i7-7700K | NZXT Kraken 41 Liquid CPU Cooler |  MSI Z270 M3 Gaming LGA 1151 | Cooler Master V1000 80+ Gold PSU | EVGA GTX 1070 | EVGA GTX 1060 (Dedicated Physx) | 32GB G.Skill TridentZ RGB PC4-19200 | 128GB Toshiba OCZ RD400 SSD NVMe M.2 (System Disk) | 2TB RAID 10 (4 x Seagate ST1000DX002 FireCuda SSHD) (Files Disk) |  64GB Intel Cache Disk (1280GB OCZ Agility 3 SSD RAID 0) | 48GB Page Disk (1280GB OCZ Agility 3 SSD RAID 0) | NZXT H440 Razer Edition Case | 1 x ViewSonic VG2439m-LED 24" [MAIN] (GTX 1070) | 2 x ViewSonic VG2436wm-LED 24" [LEFT/RIGHT] (GTX 1060)

Link to comment
Share on other sites

No, i already tried to keep collective and pitch in different positions. But it happens every time.

 

Try going to the Options --> Controls --> UH-1H Sim --> Axis Commands Category. Make sure that for 'Flight Control Collective' ONLY your throttle is selected( assigned ). If any of the other columns have something set, click them andd then click CLEAR at the bottom.

 

Then try again ... Short of that, try Calibrating your Flight Stick, either via Windows or the manufacturers software, or both.

 

Let us know ... :joystick:

Regards,

=170= Sven ☠ 2157

 

Windows 10 64 bit | Intel 7th Gen. i7-7700K | NZXT Kraken 41 Liquid CPU Cooler |  MSI Z270 M3 Gaming LGA 1151 | Cooler Master V1000 80+ Gold PSU | EVGA GTX 1070 | EVGA GTX 1060 (Dedicated Physx) | 32GB G.Skill TridentZ RGB PC4-19200 | 128GB Toshiba OCZ RD400 SSD NVMe M.2 (System Disk) | 2TB RAID 10 (4 x Seagate ST1000DX002 FireCuda SSHD) (Files Disk) |  64GB Intel Cache Disk (1280GB OCZ Agility 3 SSD RAID 0) | 48GB Page Disk (1280GB OCZ Agility 3 SSD RAID 0) | NZXT H440 Razer Edition Case | 1 x ViewSonic VG2439m-LED 24" [MAIN] (GTX 1070) | 2 x ViewSonic VG2436wm-LED 24" [LEFT/RIGHT] (GTX 1060)

Link to comment
Share on other sites

Its very strange. My controls seem to be setup properly. I have no problems flying in the cold startup training.

 

Attached find the track.

 

Edit:

Just found the prob. My cyclic is stuck in the upper left corner at entry. So I just have to immediately move the flightstick as soon I enter the cockpit.

track 1.trk


Edited by Quantenpresbyterianer

Win10, i5 3570K@4GHz, OCZ Vertex 4 256GB SSD, 16GB RAM, Gigabyte GTX 980, TM HOTAS Warthog, TM Cougar MFD, Saitek Pro Flight Rudder, TrackIR5

Link to comment
Share on other sites

Its definitely something wrong with your joystick's calibration. I started the track and took control before it even started and I had no problem.

i5 4590 @ 3.77GHz | GTX 1060 6GB | 16GB 1600MHz DDR3 | 1TB HDD+500GB HDD | Win10 Home X64

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

Thank you for your help.

Though I did a fresh calibration in windows the cyclic is always in the upper left when I enter the campaign. But easy solution is simply to move the stick a little as soon i press"fly" in the briefing. Cyclic then centers normally.

Win10, i5 3570K@4GHz, OCZ Vertex 4 256GB SSD, 16GB RAM, Gigabyte GTX 980, TM HOTAS Warthog, TM Cougar MFD, Saitek Pro Flight Rudder, TrackIR5

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...