i-scott

Hmmm, not sure what I have done,BUT............... All good. WOnder if it was the recalibrate

@evanswillo this is what i see when i run the VPC Software null

Hi yeah, got all blue across the board. Never had to use the software before, worked fine then settings dropped off as though the device was not there any more Have added additional screen shot of what I see in main post

I have Virpil pedals which are normally working fine, but, (there is always a but) for some reason has lost the bindings, what I mean by this is a day or so ago I was on flying a10IIc and had to use pedals on the ground to steer etc and to control yaw in flight. Yesterday I want on to practise the F4 and started to taxi, but was unable to steer. On checking control settings I found that the bindings weren't there any more. Trouble is you can see the VPC device in the controls but when you pick to pind to brakes or rudder etc. when you go to select the binding options for Z-Axis, Slider and Dial are missing. If I use windows Game Controllers to inspect game controllers I can see the VPC Rudder Pedals and when I check the properties I can see Z-Axis, Slider and Dial fine and they work, react to me using them on the hardware. So far I have, disabled hot plug and re-enabled Recanned all devices Unplugged the rudders and Plugged back in Done a purge of all USB Devices removing all that are not used and to keep all usb Device down to a minimum (about 7 devices) Downloaded VIrpils Software updater and applied latest firmware. Also Virpils software shows the device properly Removed the User Config folder and allowed it to be rebuilt Removed and reinstalled main DCS Game Right now I am stumped and not sure what step to try next, can anyone help Here is the screen in DCS settings null