FlyingMilk

Im running 6900xt and ye is cant stand stutters, gives me huge eyestrain. Also reprojection gives the artifacts and that looks as bad as the stutters to me. Best i got was SVR on 50% or lower with motion smoothing on. That gave me the smoothness i needed but didnt give the clarity I wanted. Never got openxr to run smoothly. So the G2 was basicly looking like or worse than what i think a quest 2 does. I might see if i can borrow one of those to test and see if its ok enough untill rtx 4000 comes and i buy like a pimax crystal or varjo headset Allso I was on gen2 cable.

Nothing, just tells me to connect device. Had it running for a second and saw picture in headset when using USB-C to A adaptor. Then blue screen again and black. Showed error 7-7. Seems like cable is broken. Dont know why as its been perfectly safe whole time. But new cable seems to be the sollution that others have had success with. And out of warranty and not paying for new. So think Im just done. Might just shoot it with my shotgun for pressure release

There is yes, but I would assume the USB-C is for datatransfer not display. Tried it now, dosnt work. From what I can find on this problem it seems like the cable went good night. And as Im out of warranty I would have to buy one, and that just aint happening. Not wasting more money on something Ive never gotten to work as intended. Think I will just let VR be for 3-5 more years and then see what its like. This whole G2 experience has drained me for over a month now.

I am using the MOBO's USB-C port not GPU. Havent had this problem before, now trying with the included USB-C to A adaptor. Got it recognized but then it goes back to unknown device in Device Manager. I allso dont have a USB 3.1 front panel header. If I did I would have one more USB-C on the front of my case. Its just there useless atm

Now when playing around with SVR again I got to a very smooth point, just not the clarity I wanted. Then G2 went black and now it says its not connected anymore, and I tried restart, tried replug. tried power on and off on cable. tried powercable out and back in nothing.... Im so tired of this. That might just be the drop, if I get it working again I think I'll just sell it Havent flashed BIOS in like a year, might be something there. But now I cant even get the G2 to work at all....

Nope, inside a tiny room with its own AC. Room chilled to about 17C (Its so cold in here) GPU around 60-70C and CPU at around 50

Clouds look fine when im at res 100% and NIS OFF. upscaling and downscaling makes them look bad. with no MSAA I still have stutter problems with the bonus of jagged edges in cockpit

She allso demanded whole yesterday for a market x) Testing now using overlay Ingame settings added with picture. Testing ground, F-16 Caucasus fighter sweep. Motion Reprojection is allways OFF, shake 0% sharpnes 0% (Prior to testing im now using skyspaces empty room as my room in WMR. res scale 100% NIS 90% FPS 45-70 (not smooth at all, didnt see the big stutterts I usually do whithin testing for about 5 min but its choppy and unplayable for me) app CPU 10-12ms GPU 14-17ms pre CPU 0ms GPU 0ms post CPU 0.17-0.18ms GPU 0.55-1.06ms Res scale 100% NIS 80% FPS 50-75 (its choppy, flickering on cloud edges. loosing enough quality that i could just use an oculus quest 2) app CPU 10-14ms GPU 11-16ms pre CPU 0 GPU 0 post CPU 0.15-0.17ms GPU 0.54-1.02ms res 2206x2158 NIS OFF FPS 50-90 (its choppy, flickering on cloud edges. loosing enough quality that i could just use an oculus quest 2 ) app CPU 9-13ms GPU 9-13ms pre CPU 0 GPU 0 post CPU 0.15-0.17ms GPU 0.29-0.79ms

I will see if I can get some numbers tomorrow. The lady of the house has been demanding some attention. I will see if I get the chance tomorrow. Thanks for the interrest in solving my problem!

ah ok, I just see every time it goes over 20 I get a spike. When its under its fine. I dont have any bloatware, buildt pc myself, no RGB controller. AMD dosnt have XMP but using their version DOCP and its set to 3200mhz Ive tried all kinds of scaling. from 20-300% with both NIS and FSR. Reason Ive used NIS most is it just basicly looks better to me. Anti shake is set to 0, never touched it, same with sharpness. No RGB program. I had winwing program installed, but its now uninstalled and Ive removed all exports in saved games folder for DCS as stated earlier. There is no more exports from simapp pro. I wish I could do 60hz but no chance, less than 5min and my eyes hurt and i start to get a headache.. I am at such a loss here :C

When i change the render scale now Ive done it in OXR Tools for WMR. Tried there and in the toolkit, same result. When Im not using SteamVR I dont use reprojection, as I cant understand how ppl live with the artifacts it creates. It looks so horrible for me. With SteamVR Im able to use it, as it dosnt create the same artifacts. Im reading the frametimes with the build in DCS FPS counter. Even when im at 90 fps it says my frametimes fluctuate between around 10 and up to 30ms and its a stuttery mess.

100% render scale, upscaling off CPU Between 7k-10k GPU 13-18k fps 50-60 frametimes 10-30 100% render, upscaling NIS 120% CPU 7-10k GPU 11-14k FPS 60-80 frametimes 10-30 80% render, upscaling 120% CPU 7-10k, GPU 9-12k FPS 80-90, frametimes goes over 5-30 Dont get CPU Bound message other than in loading screen.

I have all settings on low ingame, pixel density at 1, I've tried 3 different drivers for the GPU. Currently running the 22.8.1. Tried 22.5.1 even tried 21.6.1 as someone said that was a good one for VR.

Hi, Ive been reading these forums for about a month now trying to figure out how to get my G2 (with updated cable for AMD) to work good enough for me. My issue is I have good FPS 80-90 but frametimes are horrible, goes from 10-35. I cant even get the frametimes to not go over 20 when i play on total potato quality (render scale to 20%). Ive followed the install guide, I can choose between OpenXR and SVR. Ive done multiple fresh install. I heard Winwing products can cause frametime to go mad, and Ive followed the guides there to remove their export (no effect). I have open composite, xrtools and toolkit. Tried all possible combinations, but the most stable I get is when I go into steam VR. It tanks my FPS and I can play at 50% but only with MS on or else the frametimes are above 20 and picture is stuttering like mad. Thats all I can do. OpenXR gives me more FPS, but frametimes are so bad. Tried FIS, NIS, everything. Been going at it for about a month and Im so close to selling the G2. Any tips, as the feeling in VR dosnt want me to go back to 2D I run: 5800x - 6900XT - 32gb 3200mhz cl14 - 1TB gen3 m.2