I've been flying the KA 50 3 for a bit now. A good 90% of the time I go into an auto-hover and everything is smooth. The other 10% of the time and it quite wildly starts swinging to the right about 180 degrees before stopping. I'm pulling my hair out trying to figure out why it does this. I'll go over the various things I have tried and hopefully somebody else has an idea.
Start-up has been done in accordance of Chuck's Guide. I've done both the quick alignment and precise 20 minute alignment. It made no difference.
Pedal Trimmer is off. As well I have the input window open on the bottom left and it shows the rudder being neutral. It is not random input from another controller or drift as not only do I have deadzones on but after about a 180 degree spin, it stops turning right.
No waypoints are on on the PVI-800. I have tried with it both in Operation Mode and Off. As such, Route Mode is not engaged or used.
Trimmer is set directly on the nose before going into auto-hover. Like I said, 90% of the time I hit into auto-hover no problem.
Auto-turn is not engaged. I have reset the Shkval multiple times and disengaged and reengaged all auto-pilots, including the heading hold multiple times.
Probably a coincidence but I usually fix it by flying away from danger and continually do hard loops in any direction. I've flown in bad weather before and it sometimes sways but when this thing is doing its thing and turning randomly, it turns HARD. That is not the wind unless its a tornado.
Please help...I'll try to answer any questions and recreate anything, though its completely random when it does it. Was just flying, engaged auto-hover. Rose above trees, descended back down. Undid Auto-hover, moved about 50 meters to the left to see around a tree. Suddenly it turns 180 degrees to the right after auto-hover is engaged. As a note, after it starts doing it in auto-hover, it will start doing it out of auto-hover when below 50 KPH as well but only after it starts doing it in auto-hover.
