Alligin
-
Posts
98 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Alligin
-
-
Mission PDF location
Only thing I can find is a lineup card for each mission in the location Ramsay suggested.
Can’t find a mission briefing to print?
-
Mission PDF location
Thanks Ramsay
I’ll check tomorrow
-
Might seem like a stupid question. Where do I find the location of the mission files of Raven one to print off? Nothing like paper in hand.
Just want to read mission one to get a feel.
Before that I really need to get back up to speed. Spent 20 minutes trying to land on the carrier with flaps up. Wondering why I couldn’t get on speed
Not flown DCS for several months.
-
Very poorly visible HUD and HMD.
Wow. I have the opposite experience to all of you. i didn't want to install it! but wanted to test A2G radar.
MFD's are clear. The map view on the centre MFD is now usable. Before it was a waste of time. The cockpit is now clear as day. for me it was always a little dark.
Only bug I can see is a massive bloom on the Carrier lights.
Why am i seeing different???
See photos.
Bloody Hell.. I posted 3 screen shots to show you. But not showing. Used google photos... Can anyone recommend a way to share the photos?
-
Very poorly visible HUD and HMD.
Hi,Open up the command tool in Windows, then switch to your DCS/bin folder (e.g. "cd \Games\DCS\bin" or whatever your folders are called), then type either of the following:
DCS_Updater.exe update 2.5.6.49798@openbeta
OR
DCS_Updater.exe update @release
The first one brings you back to the previous version of open beta (which is what I did). The second one reverts you from open beta to stable (which is the same as the open beta 2.5.6.49798 ).
Hope this helps.
Doc
Thanks Doc.
After reading the many reports of the bug. I’ve decided to wait until there’s a fix.
But I’m going to take a look at the DCS GUI utility tool by Skatezilla for future problems
-
The simplest way is to use Skatezilla's indispensible utility here https://forums.eagle.ru/showthread.php?t=160053
Thanks imacken
I’ll give that a try after work.
-
Totally agree. I just reverted to the previous version of 2.5.6.
Doc or anyone.
I really want to give this patch a go to try the A2G radar. But before I do. How do I revert back to a previous build?
Don’t want to be left with an unflyable sim if it’s going to take time for a hotfix
-
check out the tutorial links in my signature
Thanks a lot your video tutorial worked a treat on the flap lever question I asked.
Powerful software is at hand and your guides make it easy.
To the OP and others. HC has a whole bunch of video tutorials available for VP products. Well worth a look to find a solution to your problem.
I have the new T50cm-2 as you all do. But the software and solutions are the same.
Minor difference in the new software is clicking on the PRO/LITE button top right corner rather than the READY button in the top left.
-
check out the tutorial links in my signature
Thanks. Will do
-
Encoder on the right of throttle handle is my radar ant elevation control, on the left is my manual range knob (f-16, haven't used it for anything in the hornet yet)
Two encoders on the base are for my heading and course knobs/switches.
Found encoders to be more useful to me, I set up the flaps lever to be a 3 position switch for flaps instead of an axis and the ring finger slider axis is just a zoom.
Astronaut
How do you change the flap lever from an axis to a 3 position switch?
I too would like to use it as flaps.
-
An important note is to change them to buffered - that works a lot better for DCS, at least for me...
See page 9 in the "community manual" for the configuration software I started to write:
https://sites.google.com/site/mazexx...edirects=0&d=1
More in this post:
Thanks Mazex,
I’ll have a look over that later.
-
CM2 Throttle Hats
Same here.
I’m wanting to use the flap lever as flaps. But it’s a slider....
Also the 2 rotaries on the throttle as radar elevation etc. But they are encoders.
Only had mine a day but confused.
-
...What am I missing?...
However, the command for A/A mode does not work well with a maintained ON/OFF switch. It's designed to work with a pushbutton that returns to OFF when you release it. Every ON/OFF cycle toggles the A/A mode between ON and OFF.
Thanks. For pointing me in the right direction
And yes not a good button choice for AA mode
-
Help needed please.
What am I missing? Warthog throttle. I want AA mode on/off with BTN16
My text looks nothing like OP's post. (below) If I can get over this one hurdle it will be clear to me.
["key"] = "JOY_BTN16",
},
},
["name"] = "Master Mode Button - A/A",
},
["d3001pnilu3001cd25vd1vpnilvu0"] = {
["added"] = {
[1] = {
.......................................................................................................................................
Op's text ....{combos = {{key = "JOY_BTN20"}, }, down = 3002, cockpit_device_id = 13, value_down = 0.3, name = "Ignition switch BOTH", category = "Front Switch Box"},
-
-
I have the WarBRD base with the Warthog grip and the centring is fine. Doesn’t feel loose at all.
I have tried it with a 30mm extension then it does feel a little loose. But I only had the stock springs fitted.
But I’d say it has the perfect feel as standard.
-
Thanks for the reply Harker.
-
Hi,
Now that we can program the jdam more accurately I thought I’d try flying one into the side of a building instead of the roof. A window if you like.
But I noticed no difference in the terminal part of the flight. But now thinking back I pickled as soon as I got the range que. (IIRC I remember Wags saying the DLZ is not yet working for JDAM) And I think I was being optimistic by setting 30* vert flight.
What are the parameters for the terminal part of flight and is it working?
-
Thanks Rudel,
I’ll give that a try after work
-
A while ago there was an update that provided a few SAM site templates.
While messing around in the mission editor (beta) I pressed a button in mission editor and all enemy SAM templates are missing.
Tried DCS repair and it didn’t work.
Where are the default templates stored please?
I also have the stable version installed if I knew where the files were located I can then have a look in my other install (stable) and copy them over.
Any help? Or maybe a mod that will give me more choice of template.
Thanks Alligin
-
The AGM-65’s are designed to be used in conjunction with a targeting pod which as a much greater magnification than the Maverick seeker head.
The targeting pod is planned for a future update.
-
Thanks Seb
That solved the problem. Panic over :-)
-
Thanks Strikeeagle.
I knew it was simple as I’d done it years ago. Too much info to cram in
-
Hi
Is there a way to save let’s say channel 1 as the default for the Stennis? (127.5)
At the moment I’m flying mostly off carriers trying to improve my landings
Thanks
Mission PDF location
in F/A-18C Raven One Campaign
Posted
Had a reply from Baltic Dragon on facepage
At the moment there are no printable briefings. They will follow.