A-10C Panels, Bezels and Instruments

A-10C Engine Cluster.

Engine Cluster Panel, made in acrylic, painted black and engraved, with a 3D printed Backplate for mounting screws.

The complete panel is with 3D printed Gauge rings, Instruments glass and 3D printed lamps.

But all of the above mentioned are optional, and the panel can be purchased without these for a lesser price. However the Gauge rings are needed for the Instrument Glasses.

The holes in the Panel are also made to fit Real 2" instruments from the A-10, all the screw positions and the holes are made to work with the original bracket for installing them too.

But since this is made of acrylic, i cannot guarantee that it will support the total weight of all those instruments, since i dont have them all to test it. But if they could get supported behind the panel, i dont see a problem.

The Optional 3D printed rings, and the Glass inserts, all fits tight into the panel, with no glueing or other fastening methods nessesary. If someone want to glue them in place, its totally up to the buyer.

The Dimensions are like the Real Plane: [ame]http://lynx.dk/blueprints/A-10C%20Engine%20Cluster%20Panel%20Outer%20Dimensions.pdf[/ame]

A template with the cutout needed for installation will be provided in a 1:1 Printable PDF.

You can buy them from my webshop, here: http://lynx.dk/product/a-10c-engine-cluster-bezel/

LX18: RWR Bezel.

Its made of 8mm Acrylic, with 4 Screws for mounting, and 2 small screw for show. It has a 3D Printed Backplate, with a Gauge Ring which can be printed to match your MIP depth to the Monitor behind it.

You also get a Rotary Encoder to Mount in the Bezel.

Its available with or without 2mm clear acrylic glass.

You can buy them from my webshop, here: http://lynx.dk/product/rwr-bezel/

LX27: VVI Bezel.

Its made of 8mm Acrylic, with 3 Screws for mounting, and 1 small screw for show. It has a 3D Printed Backplate which is 5mm high, with a Gauge Ring which can be printed to match your MIP depth to the Monitor behind it.

Its available with or without 2mm clear acrylic glass.

You can buy them from my webshop, here: http://lynx.dk/product/vvi-bezel/

LX23: AI Bezel.

Its made of 8mm Acrylic, with 4 Screws for mounting, and 8 small screw for show. It has a 3D Printed Backplate which is 5mm high, with a Gauge Ring which can be printed to match your MIP depth to the Monitor behind it.

Its available with or without 2mm clear acrylic glass.

You can buy them from my webshop, here: http://lynx.dk/product/airspeed-indicator-bezel/