eaglewen Posted February 8, 2020 Posted February 8, 2020 (edited) Hi, I'm starting with DCS-BIOS. I managed to get the switches on the F16 to work via the Arduino as also outputs (leds). Next part is interfacing servos. Within the F16 I can't get them to work. With the P51 I get it to work with for instance the carbine temperature. The difference is that I see in the control reference (DCS-BIOS WEB interface) of the F16 'no data yet' for all the gauge values. For the swiches I see there is 0 or 1 ...for the AO for instance it stated 'No data yet'. When I do the same with the P51 I see some data appearing and of course because of this the servo is working fine in this case. The indicator of the virtual cockpit is green as soon as I start the F16 to fly, so I know there is connection between all things So my questions is ...what I'm doing wrong...the construction should be fine because of the working switches and the working servo with the P51. Do I need another F16 DCS-BIOS library maybe? It was recognized as a correct plugin within DCS-BIOS Seeya Werner Edited February 8, 2020 by eaglewen
Recommended Posts