HP Reverb Headmovement

[Jagdtiger74]

Hey guys i recently got the HP Reverb and am still in the process of setting it up properly.

Graphics are really great and i very much enjoy the experience since this is my first vr set.

I followed the instructions on setup given here and am currently in Solo missions very happy. Reprojection is working and frames hit 90 most of the time and GPU and CPU frame time is roughly around 10ms. So everything feels really smooth. I currently still run 100% Samplerate in Steam VR so i guess there is some more room to fiddle with that.

 

Now to my question, it seems i have changed something i guess by accident in the head movement department, because now if i am in a cockpit lets say A10C when i try to move the head towards the right console it is like the whole plane shifts away from me. I can not look at the engines anymore because i cant get close to the canopy anymore. What did i change?

 

Also i have been flying the included P-51 with the WMR Controllers and while the right controller works great for the stick, if i use the left controller to manipulate engine and prop rpm the controller does attach to the lever but i can not "let loose" afterwards. Any ideas and help would be appreciated.

 

Thanks Jan

[FoxTwo]

Make sure the lights are on in the room, and that you have a sufficiently 'interesting' wall around the camera view area for it to track accurately.

[epolta]

Yes. Go into WMR before you start Steam VR/DCS and make sure you have 6 degrees of freedom (i.e. you can move forward and back in the cliff house) BEFORE entering DCS. If you have no 6 DOF in WMR cliff house you need to restart it and go through the calibration routine whereby it asks you to look left and right and then at the floor. This should restore your proper 6 DOF tracking.

[Jagdtiger74]

Yes that was it! Thank you very much, now i can move my head again ;-)

 

Any ideas on the WMR Controller Thing?