Nono Posted May 25, 2020 Posted May 25, 2020 Hello, I notice a problem on the latest version of the OB (everything works on the stable), the contacts in TWS mode appear and disappear very quickly (see flashing). Do you have this same problem? I am attaching a track. Thank youserver-20200524-144244_bug.trk
Santi871 Posted May 26, 2020 Posted May 26, 2020 The track is corrupted for me, the view just shows the airfield. Could you try to reproduce it in a quick mission? One thing I think might be happening is that your scan volume settings (azimuth/bars) are making the update rate on the TWS tracks too slow and they are timing out.
Nono Posted May 27, 2020 Author Posted May 27, 2020 Oupsss !!! Sorry for the bad Track. I'm upload a vidéo on youtube, 1 on last OB and 1 on last Stable. 2 vidéo make on quick mission Fighter Intercept Last OB : Last Stable : Thank you
Raven (Elysian Angel) Posted May 29, 2020 Posted May 29, 2020 I've seen similar things. I have also had SP missions where the FCR page failed to display anything other than datalink contacts. And yes, the FCR was turned on, I checked the elevation settings on the page with minimum and maximum altitude of the cone, and yet it failed to detect targets directly ahead of me, head-on, even 10 nm away. What turned out to have fixed it, is moving the axis I use for radar elevation (I use the grey slider on the Warthog throttle) up and down a bit and then back to centre. I have no idea why that turned out to be the problem (it was in the centre position to begin with ; I use that slider as flaps lever on the F-14 but I have no idea how that can affect anything else). In any case, you might try testing that yourself and see if it fixes it for you as well :-) Spoiler Ryzen 7 9800X3D | 96GB G.Skill Ripjaws M5 Neo DDR5-6000 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X870E-E GAMING | Samsung 990Pro 2TB + 990Pro 4TB NMVe | VR: Varjo Aero VPC MT-50CM2 grip on VPForce Rhino with Z-curve extension | VPC CM3 throttle | VPC CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | VPC R1-Falcon pedals with damper | Pro Flight Trainer Puma OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings Win11 Pro 24H2 - VBS/HAGS/Game Mode ON
migaguiar Posted June 1, 2020 Posted June 1, 2020 The same or similar issue, something is off with radar, RWS or TWS even with targets in front, in range 20nm, the elevation of antenna correct it cant pick them, never. The only option is going to DGFT mode and wait for the 10nm (basically you are dead) but in DGFT mode the target is picked at least. Also in STT, I need to reacquire the target 3 to 4 times since is returns back to RWS or TWS and reaquiring is needed.
cabzi Posted June 3, 2020 Posted June 3, 2020 TWS got even worse in today's patch. Can't cycle targets with TMS right or change antenna elevation. i7-6850K | GTX1080 | 32GB DDR4 | Windows 10 Pro
VampireNZ Posted June 5, 2020 Posted June 5, 2020 TWS got even worse in today's patch. Can't cycle targets with TMS right or change antenna elevation. I actually had that TWS cycle bug before the patch - two aircraft in close spread formation directly in front of me at 40-50nm, and TWS would only lock one of them and TMS right wouldn't switch to other target that should have been just as lockable as the first target. Subsequently you could only launch on one target in TWS. Vampire
ADHS Posted June 5, 2020 Posted June 5, 2020 Hello. I have the same issue. Democracy was already invented, while Scrat was eating oak fruits.
Csgo GE oh yeah Posted June 27, 2020 Posted June 27, 2020 Same, radar is BAD and TMS is even worse :(
dmatt76 Posted June 30, 2020 Posted June 30, 2020 I also have bug with not being able to switch targets if friendly contact is present. If there is i.e. AWACS and a group of hostile, TMS right locks only Awacs. Does not switch between hostiles. There must be only hostile aircrafts around to have TMS Right works properly in TWS mode.
dundun92 Posted July 11, 2020 Posted July 11, 2020 Oupsss !!! Sorry for the bad Track. I'm upload a vidéo on youtube, 1 on last OB and 1 on last Stable. 2 vidéo make on quick mission Fighter Intercept Last OB : Last Stable : Thank you It looks like the scan zone is too big and the contacts are fading out. Try doing this in the ±30 azimuth scan Eagle Enthusiast, Fresco Fan. Patiently waiting for the F-15E. Clicky F-15C when? HP Z400 Workstation Intel Xeon W3680 (i7-980X) OC'd to 4.0 GHz, EVGA GTX 1060 6GB SSC Gaming, 24 GB DDR3 RAM, 500GB Crucial MX500 SSD. Thrustmaster T16000M FCS HOTAS, DIY opentrack head-tracking. I upload DCS videos here https://www.youtube.com/channel/UC0-7L3Z5nJ-QUX5M7Dh1pGg
Recommended Posts