hberg32 Posted November 23, 2020 Posted November 23, 2020 I've created a 3D printed replacement for the Cougar gimbal that's kind of a blend of the designs by debolestis and olukelo. I'd be interested to hear any feedback if anyone gives it a shot. Right now it is intended to be used with either 4 or 8 springs. I have modeled mounting holes for dual cams but haven't yet worked out how to design cams short enough to fit into the Cougar's base. The parts are really thick so hopefully nothing will break, we'll see how it goes over time. I retained the original metal post in this design on the theory that 3D printed M25 threads might not hold up well. The hall sensors are Littelfuse 55300. https://www.thingiverse.com/thing:4653219 Henry 3
hberg32 Posted November 23, 2020 Author Posted November 23, 2020 I forgot to mention that it is modeled in OpenSCAD and the source file is posted so it should be relatively easy to modify for other sensor mounts. If you have dimensions for any other particular sensor send them to me and I'll see if I can make them fit. Pot-shaped sensors with large shafts/bodies like the Bi-Tech 6127 are not going to work with this design (at least, not without a good bit more head-scratching) as they will contact the controller housing at full stick deflection. The pivot point for the stick is really close to the top of the housing so vertical space is at a premium. Henry
Recommended Posts