Avalon66 Posted March 25, 2021 Share Posted March 25, 2021 Hi I am struggling in order to find ther way to obtain a configuration able to fulfill the following user scenario: Warhog throttle hat switch with 2 ptt on radio 1 and 2 for SRS Warthog throttle hat switches with 1 ptt able to engage Vaicom and interact with AI. It'd be acceptable also to use easy comm to avoid to tune radios for AI since playing in VR I tried several config and now I am completely lost. Anyone able to support me in order to achive that? thanks Link to comment Share on other sites More sharing options...
LiamK8 Posted March 25, 2021 Share Posted March 25, 2021 Hello Avalon66, I have the Warthog throttle & stick, I have the 'thumb button' setup for radio 1 toward me, radio 2 up and radio 3 (MIDS or A-10C) away from me These also selects the radios in SRS However I have thumb button down as dedicated PTT for SRS In essence, I can select radios and use Vaicom voice commands without transmitting through SRS, I can then select radios and transmit via SRS with the dedicated PTT button I hope this helps Liam Link to comment Share on other sites More sharing options...
Avalon66 Posted March 25, 2021 Author Share Posted March 25, 2021 18 minuti fa, LiamK8 ha scritto: Hello Avalon66, I have the Warthog throttle & stick, I have the 'thumb button' setup for radio 1 toward me, radio 2 up and radio 3 (MIDS or A-10C) away from me These also selects the radios in SRS However I have thumb button down as dedicated PTT for SRS In essence, I can select radios and use Vaicom voice commands without transmitting through SRS, I can then select radios and transmit via SRS with the dedicated PTT button I hope this helps Liam Thanks Liam, can you please share the config you are using? really I am lost and I do not have any clue how to achieve that. cheers Luca Link to comment Share on other sites More sharing options...
sthompson Posted March 25, 2021 Share Posted March 25, 2021 18 minutes ago, LiamK8 said: Hello Avalon66, I have the Warthog throttle & stick, I have the 'thumb button' setup for radio 1 toward me, radio 2 up and radio 3 (MIDS or A-10C) away from me These also selects the radios in SRS However I have thumb button down as dedicated PTT for SRS In essence, I can select radios and use Vaicom voice commands without transmitting through SRS, I can then select radios and transmit via SRS with the dedicated PTT button I hope this helps Liam I have a very similar setup and it works fine. However I'm curious how you use the radio 3 switch for MIDS (in the Hornet I presume) but for radio 3 in the A-10C. Do you change your SRS setup depending on module? I'm Softball on Multiplayer. NZXT Player Three Prime, i9-13900K@3.00GHz, 64GB DDR5, Win 11 Home, Nvidia GeForce RTX 4090 24GB, TrackIR 5, VKB Gunfighter III with MCG Ultimate grip, VKB STECS Standard Throttle, CH Pro pedals Link to comment Share on other sites More sharing options...
LiamK8 Posted March 25, 2021 Share Posted March 25, 2021 1 hour ago, Avalon66 said: Thanks Liam, can you please share the config you are using? really I am lost and I do not have any clue how to achieve that. cheers Luca Hello Luca, Of course, let me get some screenshots for you I have the corresponding Radio buttons mapped in DCS so you can select radios for Vaicom 2 Link to comment Share on other sites More sharing options...
LiamK8 Posted March 25, 2021 Share Posted March 25, 2021 1 hour ago, sthompson said: I have a very similar setup and it works fine. However I'm curious how you use the radio 3 switch for MIDS (in the Hornet I presume) but for radio 3 in the A-10C. Do you change your SRS setup depending on module? Hello, To use MIDS is just like a 3rd radio (or 4th MIDS B) click D/L on UFC click ON, you then get an option of VOC A or VOC B. Click on the one you want eg VOC A then select a channel, we use 51, it defaults to 127, clear that then type in 51. You then get anyone on the same MIDS channel appearing in your SA as A,B, C D etc It is good as you have a radio for tower (COMM1) Radio for AWACS (COMM2) and an extra for wing or flight I hope this helps There are some really good vids on D/L and SA MIDS etc. here's one from the guru Wags himself Link to comment Share on other sites More sharing options...
Avalon66 Posted March 25, 2021 Author Share Posted March 25, 2021 thanks Liam appreciate Link to comment Share on other sites More sharing options...
LiamK8 Posted March 25, 2021 Share Posted March 25, 2021 59 minutes ago, Avalon66 said: thanks Liam appreciate That's no problem at all Luca, Let me know how you get on. I'm here if you need any more help Liam Link to comment Share on other sites More sharing options...
Avalon66 Posted March 25, 2021 Author Share Posted March 25, 2021 (edited) last one how do you configure the Push-to-Talk in VAICOM? Tried several times but my programming skills are non existant Thanks in advance Edited March 25, 2021 by Avalon66 Link to comment Share on other sites More sharing options...
sthompson Posted March 25, 2021 Share Posted March 25, 2021 2 hours ago, LiamK8 said: Hello, To use MIDS is just like a 3rd radio (or 4th MIDS B) click D/L on UFC click ON, you then get an option of VOC A or VOC B. Click on the one you want eg VOC A then select a channel, we use 51, it defaults to 127, clear that then type in 51. You then get anyone on the same MIDS channel appearing in your SA as A,B, C D etc It is good as you have a radio for tower (COMM1) Radio for AWACS (COMM2) and an extra for wing or flight I think you missed the point of my question. I I have a button set up for Radio 3 in SRS. How do I use that same button for MIDS? Is MIDS mapped to SRS radio 3 by default in the Hornet? If so, that's news to me. I'm Softball on Multiplayer. NZXT Player Three Prime, i9-13900K@3.00GHz, 64GB DDR5, Win 11 Home, Nvidia GeForce RTX 4090 24GB, TrackIR 5, VKB Gunfighter III with MCG Ultimate grip, VKB STECS Standard Throttle, CH Pro pedals Link to comment Share on other sites More sharing options...
LiamK8 Posted March 25, 2021 Share Posted March 25, 2021 Go into Edit Profile from the main window (square with a pencil, top right) and add each button press for press and release Lower section in the attachment Link to comment Share on other sites More sharing options...
LiamK8 Posted March 25, 2021 Share Posted March 25, 2021 2 minutes ago, sthompson said: I think you missed the point of my question. I I have a button set up for Radio 3 in SRS. How do I use that same button for MIDS? Is MIDS mapped to SRS radio 3 by default in the Hornet? If so, that's news to me. Sorry, you are correct, the F-18 by default uses COMM1 & COMM2 forward & back and MIDS A & B up and down. I have changed my mapping in DCS and SRS to be radio 1 back, radio 2 up and radio 3 (MIDS A) forward, leaving down as my dedicated PTT button. I don't think it was initially mapped as it has only been introduced fairly recently. I just mapped MIDS A to the same button as radio 3 in DCS I hope this hasn't confused you more Liam Link to comment Share on other sites More sharing options...
Avalon66 Posted March 25, 2021 Author Share Posted March 25, 2021 1 ora fa, LiamK8 ha scritto: Go into Edit Profile from the main window (square with a pencil, top right) and add each button press for press and release Lower section in the attachment Thanks done Link to comment Share on other sites More sharing options...
LiamK8 Posted March 26, 2021 Share Posted March 26, 2021 Brilliant, does it work as you'd like We have a Discord channel if you need it https://discord.gg/EsqRVFfH Link to comment Share on other sites More sharing options...
Recommended Posts