ESCOMM_Miranda Posted September 30, 2022 Posted September 30, 2022 I've noticed that if I have the flap lever full up, the actual flap will be almost half way down, and to "fix" it you need to lower the flap lever a little bit down, and its really hard to get it into a sweet spot since lowering the lever too much will make the flap work normally. This get in the way of changing wing sweep and speeds. Tried getting a new plane and making no changes to flap adjustments and still same problem.
CarlosNO2 Posted October 1, 2022 Posted October 1, 2022 14 hours ago, ESCOMM_Miranda said: I've noticed that if I have the flap lever full up, the actual flap will be almost half way down, and to "fix" it you need to lower the flap lever a little bit down, and its really hard to get it into a sweet spot since lowering the lever too much will make the flap work normally. This get in the way of changing wing sweep and speeds. Tried getting a new plane and making no changes to flap adjustments and still same problem. Hey man, are you sure its not the maneuvering flaps? They get put down automatically, and if you have your DLC axis not centered, that could also manually command them either in or out. Your flap lever trick is probably overriding the maneuver flap logic and that's why it fixes it. Try using the DLC axis to force them in and out, and if that is your issue, you typically leave the axis in the center and allow the flight computer itself regulate maneuver flap usage. 1
Recommended Posts