raptor909 Posted January 27, 2023 Posted January 27, 2023 Hi. The A10C inverter 3 pos switch have an issue. I use a 3 pos switch but not move in TEST position, only in OFF and STAND BY. I used different switch (momentary and toggle) but the issue remain. Also the same 3 pos switch that I use work very well with other 3 pos like Arm or Light switch. Inviato dal mio M2003J15SC utilizzando Tapatalk A-10C | A-10C II | F/A-18C | F16C | AV-8B | FW-190 A-8 | MB339 | A-4E | CA [sIGPIC][/sIGPIC] https://simitaliagames.com/dcs/
lesthegrngo Posted January 28, 2023 Posted January 28, 2023 There is a way to change how switches behave by some kind of script, I remember doing that about three or four years ago. This is the thread, I managed to make it work, but I have to confess I found it hard to follow due to me not being very adept in programming, plus there were some confusing references in there where commands didn't appear where I expected them to be I hope you find it easier to follow that I did, good luck! Cheers Les
raptor909 Posted January 28, 2023 Author Posted January 28, 2023 There is a way to change how switches behave by some kind of script, I remember doing that about three or four years ago. This is the thread, I managed to make it work, but I have to confess I found it hard to follow due to me not being very adept in programming, plus there were some confusing references in there where commands didn't appear where I expected them to be I hope you find it easier to follow that I did, good luck! Cheers Les Ty but I use an Arduino card and DCS-BIOS.... Inviato dal mio M2003J15SC utilizzando Tapatalk A-10C | A-10C II | F/A-18C | F16C | AV-8B | FW-190 A-8 | MB339 | A-4E | CA [sIGPIC][/sIGPIC] https://simitaliagames.com/dcs/
No1sonuk Posted January 28, 2023 Posted January 28, 2023 (edited) I've confirmed this is not working in the Flightpanels version of DCS-BIOS and have raised an issue report on their Github. Edited January 28, 2023 by No1sonuk
No1sonuk Posted January 29, 2023 Posted January 29, 2023 My previous comment was premature. I did a fresh install of the Flightpanels fork on a new machine today, including new arduino IDE and DCS-BIOS library, and the inverter switch operates correctly. If you are using the "Hub" version of DCS-BIOS, I suggest you uninstall and use the "Flightpanels Fork". It's a bit harder to connect, but it is actively bug-fixed and updated. Hub currently isn't. If you are using Flightpanels already, I suggest updating the library.
raptor909 Posted January 29, 2023 Author Posted January 29, 2023 Hi. Just tried with latest version of Arduino IDE and all library and boards update. The issue remain. I use only the Hub version of DCS-BIOS. Ty anyway. A-10C | A-10C II | F/A-18C | F16C | AV-8B | FW-190 A-8 | MB339 | A-4E | CA [sIGPIC][/sIGPIC] https://simitaliagames.com/dcs/
No1sonuk Posted January 29, 2023 Posted January 29, 2023 If you stick with Hub, you can't fix the problem.
Recommended Posts