Helios and Ka-50 Black Shark 3

[Devrim]

Hi guys.

Capt. Zeen's Ka-50 v3 profile looks like working with Ka-50_3 but you need to update Shkval, HUD and ABRIS viewports in Helios Editor. That's OK but device displays (like PVI, UV-26 and radio) won't show the correct data, only 000.000 numbers.

Is there anyone using Helios with BS3?

Thx.

[okopanja]

I think order of one or two devices got reversed when they addes Strelets and L370. I diffed BS2 and BS3. Be aware that there is 2011 and 2022 version of BS3. So in total 3!

Edited February 12, 2023 by okopanja
corrected 350 to 370

[Calwpower]

does anyone have an idea my Ka50 / 2 no longer has ABRIS when I KA50_v3.0b
KA50 /3 it works without any problems
KA50_vv3.0b

since the last patch 

[okopanja]

I am not sure who maintains Helios, but it is possible to determine of the shark is BS3 2011 or 2022 based on absence of device 64.

E.g.

if LoGetSelfData()["Name"] == "Ka-50_3" and Export.GetDevice(64) == nil then
 -- BS3 2011
else
 -- BS3 2022
end

BS2 remains to be Ka-50. Although I think BS3 will be an upgrade purchase for most BS2 owners, on online servers I mostly see BS2 and BS3 2022 listed as slots, so this should be taken into account.

 

[BlimpyBoy]

Any update on this issue?  I haven't been able to get the PVI and others to work either.  

[minusaka]

I'm playing Ka-50 BS 3 and using Helios for the cool secondary screen. But, darn it, I can't get the 'viewport' to work for KA-50 III ABRIS and KA-50 III SHKVAL. On the bright side, Ka-50 BS 2 and F18 are working just fine. Can anyone lend me a hand with this?

[KyKyPy3HuK1606688683]

Dear guys hello. Very much like to customize everything on the axis have a lot of them. So at the detailed adjustment of KA50, found that: the axis of the Rotor Brake does not work correctly, it is the axis and only on the visual aspect. You can check, adjust any axis on the Rotor Brake , move it down (in the correct position) the engine will never start. There was an error in the programming of the mod, the developers change it is easy! If the axis is not to disassemble everything works correctly. Thanks for the opportunity to write this here

 

[Leon-O]

Hi, i'm making a port for the BS2 Capt Zeen helios profile to the new BS3, feel free to try it and give me your feedback, this is the first version, but all the main panel including the ABRIS, SHVKAL and Gauges works OK, i will try to update as soon as possible.

https://www.digitalcombatsimulator.com/en/files/3339745/