Mirage 2000 missile mod

[Gaz48]

Hi ! 

Thanks for this amazing mod !

[VictorDavion]

On 7/20/2023 at 3:52 PM, VictorDavion said:

You're still limited to either A/A only or A2G only correct based on the C's SMS limitations? No mixing of A2A and A2G?

Yes thats correct. If A2G only magics and if any radar guided A2A no ground ordance otherwise you get a sms error.

[VictorDavion]

Anyone get any other missiles on station 1 and 9 to work other than the magic 1 and 2? 

[Sagal]

Thanks for the Mod. Can you modify your file so that the ones using the mod Rafale from VR3D studio (based on F/A-18) can use the Meteor? As Meteor is part of this mod or indicate how the files can be modified to allow that?

[UN9249]

25 минут назад, Sagal сказал:

Thanks for the Mod. Can you modify your file so that the ones using the mod Rafale from VR3D studio (based on F/A-18) can use the Meteor? As Meteor is part of this mod or indicate how the files can be modified to allow that?

The main problem is that the mod for Rafale replaces the amraam models with meteors. In fact, these are the same amraams but in the form of a meteor. To add them to the mirage model, you need to register the ability to use amraam in the config, and then in the same file place the coordinates of the amraam-meteor model according to the visual display. In principle, this is not difficult to do, but it takes a long time. and of course if you fly without a mod of the Rafale, the amraams will be visually displayed, but they will be located in relation to the plane - God knows how

Edited October 5, 2024 by UN9249

[No.20Raka]

Where do we install this mod? Main DCS installation folder?

[UN9249]

yes

[BittuCNGT]

the problem that i am facing now is that if i load gbu12 in weapon stations 1,2,9,10,6 or 4 i am unable to configure the laser codes for those and in the config panel can you help with it?
previously when laser codes were set using the kneeboard it wasnt an issue (i came back after many months)