AV8NA targetpoints/ waypoints problem

[Черный Скиталец]

Hello everyone! I very need your help with one question, wich i m trying to resolve last weeks(yes)
I understand how to insert waypoint in harrier, but after i m using JDAM, (TOO enter, TOO enter, TOO enter) a lot of targetpoints appearing on my left screen(on map). And i can't switch back to my waypoints, i still see them in DATA page, but i can't follow them and can't see them anymore.

nullCan you please help me and explain how i can switch my navigation between waypoints and targetpoints? 

Thanks for any answers

[BJ55]

From Chuck's guide page 421:

Changing Steerpoint Types with the Quick Access (QA) Menu
You cannot cycle through different steerpoint types with the EHSD arrows alone. To change steerpoint type, you have to do it through the Quick Access (QA) menu. To access it:
1.Long press on the EHSD arrows or on the Waypoint Increment (WINC) button will bring it in the ODU (Option Display Unit).
2.Depending on whether you have a target designation or not:
a)If you have a designation (DESG boxed on the EHSD), summoning the QA will bring the T0 between the arrows, select target in the ODU and “0” (T0) on the UFC scratchpad.
b)If no designation exists, summoning the QA menu will have the current steer type selected in the ODU and point number populating the scratchpad. Also, while in the QA menu, you don't have the EHSD arrows available anymore, you need to exit/close the QA menu for them to reappear.
3.Once the QA is summoned, you can choose between WYPT (Waypoint), MKPT (Markpoint) or TGPT (Target Point) in the ODU , which will bring in the UFC scratchpad either the last selected number of this type or the first of them (if you didn't use any point of this type during the flight).
4.Write the number of the desired steerpoint (as an example, type “2” for “Markpoint 2”) in the UFC (Up-Front Control).
5.Press ENT. Performing this action will close the QA menu.
6.The selected point will then be displayed between the EHSD arrows, which means that you will be able to cycle through the points of the selected type with the EHSD arrows (and only this type).

Edited November 20, 2023 by BJ55

[Черный Скиталец]

2 hours ago, BJ55 said:

From Chuck's guide page 421:

Changing Steerpoint Types with the Quick Access (QA) Menu
You cannot cycle through different steerpoint types with the EHSD arrows alone. To change steerpoint type, you have to do it through the Quick Access (QA) menu. To access it:
1.Long press on the EHSD arrows or on the Waypoint Increment (WINC) button will bring it in the ODU (Option Display Unit).
2.Depending on whether you have a target designation or not:
a)If you have a designation (DESG boxed on the EHSD), summoning the QA will bring the T0 between the arrows, select target in the ODU and “0” (T0) on the UFC scratchpad.
b)If no designation exists, summoning the QA menu will have the current steer type selected in the ODU and point number populating the scratchpad. Also, while in the QA menu, you don't have the EHSD arrows available anymore, you need to exit/close the QA menu for them to reappear.
3.Once the QA is summoned, you can choose between WYPT (Waypoint), MKPT (Markpoint) or TGPT (Target Point) in the ODU , which will bring in the UFC scratchpad either the last selected number of this type or the first of them (if you didn't use any point of this type during the flight).
4.Write the number of the desired steerpoint (as an example, type “2” for “Markpoint 2”) in the UFC (Up-Front Control).
5.Press ENT. Performing this action will close the QA menu.
6.The selected point will then be displayed between the EHSD arrows, which means that you will be able to cycle through the points of the selected type with the EHSD arrows (and only this type).

 

it works! Thanks you very much!