Jump to content

Performance Issue/Severe Stuttering with TrackIR


Go to solution Solved by RRVyper,

Recommended Posts

Posted (edited)

Just wanted to post that I found the solution for the severe stuttering in DCS 2.9 I was experiencing when panning the view using TrackIR, in the hopes it might help someone else.

It turns out I had "Disable Fullscreen Optimizations" checked in the Properties/Compatibility settings for Track-IR. I believe I had it disabled for another flight sim but forget now why or which sim, or even what issue it fixed.

Now I can finally use 2.9 after it being unplayable since I updated from 2.8.

Edit: stuttering came back the next day so disregard this 'fix'.

Randy

Edited by RRVyper
New info.
  • Thanks 1
Posted (edited)

try move ur mouse.if back to normal fps,replace ur high reporting rates mouse.

Edited by _UnknownCheater_
  • GamingPC: Ryzen 5950X  + 64G RAM + Nvidia 4090 + 1T Dedicated SSD For DCS 
  • HOTAS: WingWin F15EX Throttle + VKB Gunfighter Mk.III Joystick + SN2 Rudder + TrackIR Pro
  • HomeServer: Dell R7515 (EPYC 7402 + 1 T RAM + 48T SSD Raid10 + Nvidia A40
  • Network: Google Fiber 2G

 

Posted

Hi

I use an online translator

I have the same problem especially on the Persian golf card. but where is :

"Disable Fullscreen Optimizations" checked in the Properties/Compatibility settings for Track-IR.

I do not find in "trackIr v5" 

 

thank you

Christian

 

Posted

Well, I fired up DCS today and the stuttering was back. So disregard my 'fix' (I'll edit the first post). It turns out just shutting down and restarting DCS causes the stuttering to go away. I will try loading a different location and see if stuttering comes back and report back. Sorry for any inconvenience. 🙄

Randy

Posted

So it appears my stuttering is probably caused by objects in the distance getting loaded into memory off a slow hard drive. It's most noticeable when taking off and gaining altitude while, at the same time, panning around. Restarting the sim just loads from the cache. Using lower graphics settings does not make an appreciable change. I previously had DCS on an NVME drive. When I decided to reinstall after not using DCS for quite a while and after getting some new flight hardware I chose a slow storage drive. What was I thinking?? I will rectify this and hopefully things will work out.

Randy

  • Solution
Posted

Confirmed that my issue was the slow hard drive. Moved DCS to Samsung 990 Pro NVME M.2 drive that arrived today and no stuttering at all when panning. Good times.

Randy

  • Like 1
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...