Parking brake binding bug

[GUCCI]

Good day all! After a few hours spent in the corsair, I've encountered a pretty annoying issue.

If you have the parking brake binding- (one switch for on, one switch for off) it seems to bug out your toe brake bindings.

This only happened when I was on deck on the essex, i did not get the issue on land. it went as follows- 

I landed, taxied forward to the bow, set the parking brake, re-fuel, then when i turned off the parking brake and started rolling to taxi- back, 

I was unable to diff brake turn, unable to brake at all- looked at my pedals and they were twitching when i pressed my binds for brakes. 

I went into my controls, pressed the brake bind i had set (did not change or remove the bind, just simply pressed to make sure it was still bound) 

and suddenly the brakes worked again. So i set the parking brake back on to try again, and the same issue occurs. 

conditions to test and see if u have same issue- 

1) be on essex carrier deck.

2) have left, right, and both brakes bound ( i dont have an axis so i use HOTAS buttons fir L/R and a paddle for both)

3) Have the parking on/off set on a two way switch (up turns the parking brake on, down turns it off- no middle position)

4) turn on park brake, then turn off park brake and attempt to use toe brake binds- you'll notice they will twitch and not actually deppress. 

5) you can get the brakes working again by opening the binds menu and pressing the keybinds you had set.

 

Thank you Magnitude 3 for your hard work, i hope you can take this bug down and keep it in mind. 

[GUCCI]

Hope the team has seen this- If there is a better area to post bug reports for visibility do let me know!